Electrochemistry Meters SD 300 pH SD 310 Oxi SD 320 Con

Product catalog summary

Overview
The document provides detailed information about Aqualytic's range of electrochemistry meters, specifically designed for field use. These meters are rugged, water-resistant (IP67), and equipped with features such as automatic temperature compensation, data logging, and PC interface capabilities.

Applications
The meters are suitable for measuring pH, Redox, temperature, conductivity, TDS, salinity, dissolved oxygen, and oxygen saturation in various water types including drinking water, cooling/boiler water, waste water, pool water, and surface water.

Key Features

SD 300 pH: Offers automatic buffer detection, high resolution, and automatic temperature compensation. It supports 1, 2, or 3 point calibration and includes features like min/max value memory, auto hold, and auto power off.
SD 310 Oxi: Measures oxygen partial pressure, concentration, and saturation. It includes automatic air pressure measurement, salinity correction, and a self-polarizing galvanic oxygen probe.
SD 320 Con: Provides conductivity, TDS, and salinity measurements with automatic temperature compensation. It supports various cell constants and includes features like min/max value memory and auto hold.

Technical Specifications

SD 300 pH: Measures pH (-2.000 to 16.000), Redox/mV (-1999.9 to 1999.9 mV), and temperature (-10.0 to +110.0 °C). It has a high accuracy of ±0.005 pH and ±0.05% FS for Redox/mV.
SD 310 Oxi: Measures O2 concentration (0.0 to 70.0 mg/l), O2 partial pressure (0 to 1200 hPa), and O2 saturation (0 to 600%).
SD 320 Con: Measures conductivity (0.000 to 1000 mS/cm), resistivity, TDS, and salinity. It supports a wide range of cell constants and has an accuracy of ±0.5% of reading.

Accessories and Delivery Content
The document lists various accessories such as electrodes, sensors, calibration solutions, and data transmission software. Each meter set includes the instrument, batteries, relevant electrodes or sensors, and a carrying case with a manual and warranty information.

Catalog excerpts

Electrochemistry Meters SD 300 pH SD 310 Oxi SD 320 Con-1

Electrochemistry Meters SD 300 pH SD 310 Oxi SD 320 Con Waterproof Hand-held Meters for the determination of: pH/Redox/Temperature, Conductivity, TDS, Salinity, Temperature, Dissolved oxygen (O2), O2-Concentration, O2-Saturation, Temperature ■ Rugged, water resistant (IP 67) designed for field use ■ PC interface (USB / serial or analog) ■ Automatic buffer detection (SD 300 pH) ■ Data logger and alarm function (min./max.) ■ Good Laboratory Practice (GLP-features) ■ Clear, concise result reading: easy-to-read backlit LCD display ■ Automatic temperature compensation ■ High resolution (0.001 pH / 0.1 mV) (SD 300 pH) ■ Dirt-insensitive up-to-date 4-pole conductivity cell offering highest precision (SD 320 Con) ■ Drinking Water ■ Cooling/Boiler Water ■ Waste Water ■ Pool Water ■ Surface Water General Catalogue April 2018 Regularly updated information: www.aqualytic.de

Open the catalog to page 1

Electrochemistry Meters SD 300 pH SD 310 Oxi SD 320 Con-2

Electrochemistry Meters Features SD 300 pH Min / Max Value Memory highest and lowest measured value is saved. Auto Hold freeze and display measurement. Auto Power Off if unused, the meter automatically switches off after a selected period (0 to 120 min, or deactivated) Additional Display for pH Electrode and Battery Bar graph display Low Battery Display “BAT” Automatic Temperature Compensation Automatic Temperature Compensation (ATC) in pH mode (in the range of 0 - 105 °C) when the temperature probe is connected. Temperature can be input manually, when the temperature probe is not attached. pH...

Open the catalog to page 2

Electrochemistry Meters SD 300 pH SD 310 Oxi SD 320 Con-3

Technical data Measuring ranges pH - 2.000 ... 16.000 pH 418609 KCl-solution, 3 molar saturated with AgCl, 100 ml 195070 Redox calibration solution, 470 mV, 100 ml 724620 USB 300 cable, for connection to a computer 724625 GSOFT 3050 data transmission software with logger for setting, reading and printing of stored data 725060 Case with foam inlet pH, Redox BNC female connector, compatible to standard BNC plugs and waterproof BNC plugs, additional banana-jack (4 mm) for separate reference electrode input resistance: 1012 Ohm Temperature 2 banana jacks (4 mm) for temperature probe (Pt1000 or NTC...

Open the catalog to page 3

Electrochemistry Meters SD 300 pH SD 310 Oxi SD 320 Con-4

Electrochemistry Meters Accessories Order Code Code 19805050 Oxygen sensor with 1.5 m cable, platinum cathode / Lead anode 19805051 Oxygen sensor with 10 m cable, platinum cathode / Lead anode 19805052 Oxygen sensor with 30 m cable, platinum cathode / Lead anode 724670 Service Set for oxygen sensor consisting of 3 pcs. spare membrane heads and 100 ml KOH (1.18 mol/l) electrolyte solution 19805055 Protection cap for oxygen sensor for depth measurement (PVC) 19805056 Protection cap for oxygen sensor for depth measurement (brass) 724620 USB cable, for connection to a computer 725020 Case with foam...

Open the catalog to page 4

All AQUALYTIC catalogs and technical brochures

Archived catalogs

General catalog
136 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list