1. Catalogs
  2. AQUALYTIC
  3. COD Set-Ups COD VARIO

COD Set-Ups COD VARIO

COD Set-Ups COD VARIO

COD Set-Ups COD VARIO

Product catalog summary
Overview: The document provides detailed information on the AQUALYTIC® COD VARIO setups for determining the chemical oxygen demand (COD) in water samples. It highlights the use of small-scale sealed-tube tests compliant with ISO 15705:2002 standards, offering a range of measurements from 0 to 15,000 mg/l.
Specifications:
  • ST-COD Sealed Tubes: Ready-to-use tubes with chloride interference suppression up to 1000 mg/l for low and middle ranges, and up to 10,000 mg/l for high range. Mercury-free options are available.
  • Measurement Ranges: Low range (0-150 mg/l), Middle range (0-1500 mg/l), High range (0-15000 mg/l).
  • Photometer Features: The COD VARIO photometer includes two LED light sources (610 nm and 430 nm), a waterproof sample chamber, and a user-friendly interface.
Procedures:
  • Sample is added to a COD VARIO tube test, heated in a reactor, and analyzed using the photometer.
  • Photometric detection is based on a linear relationship between absorbance and concentration.
Equipment and Accessories:
  • COD Set-Ups: Include a photometer, tube tests, a reactor, and a vial stand. Available in AL100 and AL200 models with specific order codes.
  • Tube Tests: Available for different ranges with specific order codes, compatible with Hach® devices.
  • Standard Solutions: Provided for checking operation methods and device conditions, available in concentrations of 100 mg/l, 500 mg/l, and 5000 mg/l.
Key Highlights:
  • The COD VARIO system is designed for sensitive and precise water testing with minimal effort.
  • It ensures reliable and convenient operation with long-term stability of LED light sources.
See more

Catalog excerpts

COD Set-Ups COD VARIO-1

COD Set-Ups COD VARIO Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube I Total range 0 - 15000 mg/l I (ISO 15705:2002) Waste water parameter COD The chemical oxygen demand, ST-COD value, of water as determined by this dichromate method can be considered as an estimate of the theoretical oxygen demand, i.e. the amount of oxygen consumed in total chemical oxidation of the organic constituents present in the water. COD VARIO Photometer With a measuring range from 0 to 15,000 mg/l O2, the AQUALYTIC® photometer are suitable for waste water testing. Two LED light sources with long-term stability (λ1 = 610 nm ; λ2 = 430 nm, according to ISO 15705:2002), a waterproof sample chamber, a large digital display, and the user-friendly keypad ensure maximum operating reliability and convenience. AL100 COD VARIO (AL100 photometer in case) AL200 COD VARIO (AL200 photometer in case) Highlights ■ ST-COD sealed tubes ready for use ■ Suppression of chloride interference up to 1000 mg/l (LR & MR) up to 10000 mg/l (HR) ■ Mercury free tube tests, in absence of chloride interference ■ 3 ranges: Low range: 0 - 150 mg/l, meets ISO 15705:2002 Middle range: 0 - 1500 mg/l, meets ISO 15705:2002 High range: 0 - 15000 mg/l Regularly updated information: www.aqualytic.de

 Open the catalog to page 1
COD Set-Ups COD VARIO-2

COD VARIO tube tests The AQUALYTIC® COD VARIO test set-ups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship between absorbance and concentration. The AQUALYTIC® COD VARIO tube tests are available for the measuring ranges 0-150 mg/l O2, 0-1500 mg/l O2 and 0-15000 mg/l O2. Their chemical properties and a 16 mm tube diameter make them compatible to Hach® devices.* After adding the sample to a AQUALYTIC® COD VARIO tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor...

 Open the catalog to page 2

Archived catalogs

  1. General catalog

    136  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.