Designed to meet the latest technical requirements, the AL200 photometer can be used in practically every area of water analysis. The high-precision optics with its top-quality interference filters uses long-term stable LEDs as light-source. Because there are no moving parts, the entire measurement device requires absolutely no maintenance. Precise and reproducible analysis results are obtained in a short time. The units impress with their user-friendliness, ergonomic design, compact dimensions and easy handling. The tests are conducted using either AQUALYTIC® tablet reagents with long-term stability and a guaranteed minimum 5 or 10 year shelf life or using liquid reagents. Scroll Memory (SM) For multi-parameter instruments, the order of the various methods is determined. To avoid unnecessary scrolling for the required test method, the instrument memorizes the last method used before switching off the instrument. When the instrument is switched on again, the scroll list comes up with the last used test method first. This allows for faster access to favored methods. Zero Setting (OTZ) It is not necessary to zero the instrument each time. The zero setting is held in memory until the device is turned off (One Time Zero - OTZ). The zero setting can be confirmed whenever it is usefull. Manufacturers Test Certificate M ■ Scroll Memory ■ Infra-red interface ■ Real-Time-Clock and Date ■ Calibration Mode Besides the “Certificate of Compliance” which is supplied with the AL100, manufacturers test certificates M are available at cost on request. Manufacturers test certificates M are individually supplied per instrument and per method. The manufacturers test certificate M has to be ordered together with the new instrument and cannot be delivered at a later stage. ■ Backlit Display ■ Storage Function ■ One Time Zero (OTZ) ➲ Reagents (order codes), please see pages 34 onwards ■ Waterproof *) as defined in IP 68, 1 hour at 0.1 meter0,1 *) Regularly updated information: www.aqualytic.de

Technical data LEDs, interference filters (IF) and photo sensor in transparent sample chamber. Depending on the version, up to 3different interfernce filters are used. Wavelength specifications of interference filters: 430 nm ∆ λ = 5 nm 530 nm ∆ λ = 5 nm 560 nm ∆ λ = 5 nm 580 nm ∆ λ = 5 nm 610 nm ∆ λ = 6 nm 660 nm ∆ λ = 5 nm Wavelength Accuracy Photometric Resolution Set of 5 round vials with lid Height 48 mm, Ø 24 mm Adapter for round vials ø 16 mm Membrane filter set for use when preparing samples, 25 membrane filters, 0,45 µm, 2 syringes 20 ml Vial stand for 6 round vials Ø 24 mm, acrylic...

Test Code Test Code COD, tube tests, without reagents 0 - 150 mg/l O2 (ø 16 mm) 0 - 1500 mg/l O2 (ø 16 mm) 0 - 15000 mg/l O2 (ø 16 mm) Chlorine, pH, Cyanuric acid, 42860502 Alkalinity-M tablet reagents 0.01 - 6.0 mg/l Cl2 / 0.1 - 10 mg/l Cl2* 6.5 - 8.4 pH / 0 - 160 mg/l cyanuric acid 5 - 200 mg/l CaCO3 (TA) Chlorine, pH, Cyanuric acid, 42860542 Alkalinity-M liquid reagents for chlorine and pH 0.02 - 4 mg/l Cl2 / 6.5 - 8.4 pH 0 - 160 mg/l cyanuric acid / 5 - 200 mg/l CaCO3 (TA) 2in1 Test Code Chlorine, pH, tablet reagents 0.01 - 6.0 mg/l Cl2 / 0.1 - 10 mg/l Cl2* 6.5 - 8.4 pH Chlorine, pH, liquid...

Data Transfer The optional available IRiM (infra-red interface modul) uses modern infra-red technology to transmit measurement data from the AL100 photometer to one of 3 optional interfaces. These interfaces can be used to connect to a PC, a USB printer1) or alternatively a serial printer2). The unit is supplied complete with data logging software providing easy and rapid transfer of data to the PC. As an option, the data can be saved as an Excel sheet or a .txt file. Measurement data can quickly be printed out, using a specified1) USB or alternatively a printer with a serial plug-in connected...