ACTEON 5000

Product catalog summary

Scope of Application: The ACTEON 5000 digital transmitter is designed for use in various water treatment applications, including wastewater treatment plants, drinking water monitoring, industrial effluent treatment, surface water monitoring, and fish farming. It supports the connection of two digital sensors from the PONSEL MESURE range to monitor parameters such as pH, ORP, temperature, dissolved oxygen, conductivity, salinity, turbidity, UV254, TOC, COD, BOD, suspended solids, and sludge blanket detection.

Key Features: The transmitter offers digital communication technology, two sensor inputs, two analog inputs, and two relay inputs. It features a large graphical screen for displaying up to four measurements and provides outputs in 4-20 mA, programmable relays, Modbus RS485, and Ethernet. The device is designed for fast and intuitive programming and supports a wide range of digital sensors.

Software and Functionalities: The ACTEON 5000 includes digital sensor inputs, analog inputs, relay inputs, and outputs for external cleaning systems. It offers programmable PID, customizable digital outputs/relays, and data recording capabilities with internal flash memory. The device compensates for atmospheric pressure to ensure accurate oxygen measurements.

Technical Specifications: The transmitter features a backlit graphic LCD touch screen, analog outputs with galvanic isolation, and relay outputs. It operates within a temperature range of -15°C to +50°C and includes a USB port for data unloading. The housing is made of grey ABS with IP65 protection and an antireflective polyester front.

Digital Sensors: The ACTEON 5000 supports robust digital "smart" sensors that store calibration data and offer reliable measurements without interference. These sensors are suitable for various water applications, including drinking water and wastewater.

StacSense Probe: The UV254 multiparameter probe measures organic compounds in water using UV absorption at 254 nm. It provides measurements for SAC254, CODeq, TOCeq, BODeq, and turbidity, with automatic turbidity compensation. The probe communicates via Modbus RS-485 and requires no consumables.

Catalog excerpts

DIGITAL FIXED UNIT MULTIPARAMETERS DIGITAL TRANSMITTER IN THE FIELD

Open the catalog to page 1

• Technology of digital communication • 2 inputs sensor • 2 analog input (0/10 V - 0/4-20 mA) • 2 relay input • Large graphics screen: visualization until 4 measures, • Outputs 4-20 mA, Programmable relays (visible state main screen) • Fast and simple intuitive programming • Wide range of digital sensors • Digital output Modbus RS485 • Digital output Ethernet CTZN: INDUCTIVE CONDUCTIVITY DIGITAL SENSORS OPTOD : OPTICAL DISSOLVED OXYGEN Stainless steel or Titanium Digital « smart » sensors • All calibration data (factory coefficients, offset, slope) are stored in the probe, • Digital technology...

Open the catalog to page 2

• UV254 multiparameter probe - UV 254 spectral absorption without any reagents or consumables. - Multi-parameter measurement: SAC254, CODeq, TOCeq and & BODeq, Turbidity eq - Modbus RS-485 digital communication - Automatic Turbidity compensation. The StacSense probe uses UV absorption at 254 nm to measure organic compounds dissolved in water. This absorbance is correlated with the concentration ofTOC, COD and BOD to provide a high-performance probe Performance levels obtained under laboratory conditions (controlled temperature and stirring, aqueous solutions of KHP) * Optical path 2 and 50mm,...

Open the catalog to page 4

All AQUALABO catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list