COBALT C10-I
5Pages

COBALT C10-I 15W Industrial FM Transmitter 01000100 ON-AIR HIGH EFFICIENCY AUDIO PROCESSOR Housed in a rugged, Industrial chassis - the Cobalt C10-I is designed for demanding environments, in an ultra -compacy form that is designed to be mounted in various ways. The Cobalt C10-I Transmitter has the same, superior audio quality and sound clarity of all other Cobalt Transmitters, which is a result of their Direct to Channel Digital technology. The Cobalt C10-I does away with the Screen and front panel controls, and is setup and controlled via its web-remote, on either WiFi or LAN. Running on...

Output Power (W) Range(W) RF Output connector Input ACV @ 50/60Hz Power Connector Power consumption AC-RF efficiency typ Temperature controlled fan Power supplies Dimensions WxDxH (inch) Dimensions WxDxH (cm) Weight Modulator Transmitter type Modulator RF Output Frequency Range RF Frequency Steps Frequency Stability Solid-state FM Stereo transmitter Direct-to-channel (DDS) VHF Band II, 87-108MHz 100kHz ±1 ppm or ±150Hz in 0-50°C range with internal 10MHz clock FM Modulation Range Capability reference 75kHz default, 100% modulation user adjustable up to 105kHz RF Power Stability...

Frequency response Pre-emphasis Mono SNR Mono THD+N Mono Performance 20Hz - 15kHz ±0.02dB 0, 50 or 75 ps >75dB AES/EBU input, >70dB Analogue input <0.002% analogue input, <0.001% AES input, with 75us de-emphasis Analogue MPX Input Performance Frequency response FM SNR THD+N Digital MPX Input Performance Frequency response FM SNR THD+N Audio Inputs Analogue Digital Audio Output Headphones Out 2 x XLR female, 10kQ impedance, level adjustable 0-24dBu AES/EBU via RJ45 per StudioHUB+, level adjustable -20-0dBFS, sampling rates 32-192kHz 1/4" (6.3mm) female stereo socket, software adjustable...

RDS Generator Type Protocols Fully Dynamic RDS/RDS2/RBDS Generator ASCII commands, UECP protocol and X-Command Multi-port architecture: UART over USB-B & Ethernet Communication and Control 10MHz input 1PPS input RF sample output UART over USB USB Ethernet RS232 GPIO BNC, 50Ω terminated BNC, 50Ω terminated SMA, 50Ω, -30dBc USB-B, system control 2 x USB-A, storage & FW upgrade 1 x RJ45 DB25 shared connector, system control DB25 shared connector, 8 x output & 8 x input, all optically isolated. DB25 shared connector, programmable logic/polarity DB25 shared connector, 4-channel 0-5V range...