Aqua-Jet ® Surface Aerators Often Imitated…Never Duplicated ® AQUA-AEROBIC SYSTEMS, INC.

itated...never duplicated possibly be the most imitated aerator in the world. But, as with other manufactured products, copies never equal the original aerator's success. To-date more than 80,000 Aqua-Jet® aerators have been installed throughout treatment schemes. industry continues to change, so operation have always been maintenance is playing a more significant role in the selection process. Realizing this, long-term field testing a new line of limited maintenance products called the Endura® Series. Each Endura® product is available in a wide variety of horsepower. Vibration Controlled Design...

1. Motors are totally enclosed, fan cooled, and rated for severe duty. Motors are available in standard or high efficiency and vibration tested for optimum performance in the most stringent applications. Standard features include heavy-duty bearings and seals, class F insulation or better and a minimum 2. Labyrinth Seal Guard prevents upward migration of water from contacting the lower end bell of the motor and working into motor bearing. 3. The Diffusion Head of an aerator must be able to support the weight of the motor, evenly distribute static and dynamic loads, and change the direction of...

Single Speed and Dual Speed Units Stainless Steel Series- SS Dual Speed - Highlighted area indicates dual speed specifications. 'Includes allowance for anti-vortex cross. Dual Speed - Highlighted area indicates dual speed specifications. 'Includes allowance for anti-vortex cross. Note: Endura® Series not available in some lower horsepower, single phase and special orders.

Note: These figures are typical performance rates as applied to operational systems. D = normal operating depth in which the Zcm and Zod hold true Zcm = Zone of complete mix( assumes conventional activated sludge mixed liquor solids) Zod = Zone of complete oxygen dispersion Impingement = nominal diameter of spray pattern Horsepower of lower speed of dual speed Aqua-Jet® aerators Typical Aqua-Jet® Aerator Operating Depths* Activated Sludge Unit Size (Horsepower) Normal Operation Draft Tube Recommended Aerated Lagoons Unit Size (Horsepower) Assembly Recommended Normal Operation Warning: The Aqua-Jet...

Selection of Electrical Service Cable Selection of Anchor Cable

Mooring Arrangements Post Mooring Post Mooring is used in larger lagoons where distances prohibit mooring the Aqua-Jet® to the shore. A mooring post is installed into the lagoon floor and the mooring line is attached to an eyebolt in the post. For 3 or 4 point Maintenance Mooring Maintenance Mooring enables the operator to pull the aerator to the shore, or opposite side of the basin, for maintenance without disconnecting the line. 1 or 2 mooring points are supplied with a disconnect device and a long length of cable. Pivotal Mooring A Pivotal Mooring arm is used in applications with varying water...

Aqua- Jet® Surface Aerators Contained Flow Aerators Direct Drive Mixer-Blenders Aqua MixAir® Aeration Systems Aqua EnduraDisc" Fine Bubble Diffusers Aqua EnduraTube® Fine Bubble Diffusers Coarse Bubble Diffusers Sequencing Batch Reactors Batch Reactor with AquaEnsure Aqua MSBR Modified Sequencing Batch Reactor Phased Activated Sludge Systems Multiple Barrier Membrane Systems Membrane Biological Reactors Cloth Media Filters with OptiFiber® Aqua MiniDisk® Cloth Media Filters with OptiFiber Cloth Media Filters with OptiFiber Automatic Backwash Filters Surface Spray Coolers Process Managemen The...