Catalogs >
APS Novastar >
LS60V Pick and Place Machine with Vision

LS60V Pick and Place Machine with Vision
2Pages

Catalog excerpts

LS60V Pick and Place Machine with Vision - 1

Automated pick & place with vision centering Model LS60V shown Vision System The BGA being centered at the left appears on the software window shown at the right. The LV-series vision centering pick and place systems use the full features of Cognex® vision. Components The Cognex® vision assist allows accurate placement of 0201s, ultra micro BGAs, CSPs, QFPs and a wide range of virtually all SMT components. System Features • Placement rates up to 4800 cph • Placement accuracy to ±0.001” • Capable of placing fine pitch components down to 15 mil • Resolution of 2pm (0.0000787") and accuracy to ±0.001” • Cognex® vision system with fiducial correction, bad board mark and pattern recognition • Optional fluid dispenser • Friendly, easy to use Windows® based software • Self-contained vacuum - no shop air needed • Automatic 4-position nozzle changer • Accessible, unobstructed work station for operator • Feeder capability: 144 8mm tape lanes utilizing bank feeders Feeders Standard tape feeder sizes include 8mm, 12mm, 16mm, 24 mm, 32mm and 44mm. The vibratory feeder with frequency and amplitude control can handle loose and tube components. Unique SuperStrip™ feeders are a convenient way to use short tape strips. Feeder positions are pre-programmed for quick set-up. With the optional 12 position 8mm bank feeders, capacity can increase by 50%, i.e. the model LS60V would increase to a capacity of 144 8mm tape feeders. Fluid Dispenser Computer controlled in 10 millisecond increments with separate interval/raise-lower speed allows solder paste or adhesive glue to be applied accurately prior to component placement. This time/ pressure fluid dispenser has dispense rates up to 10,000 dots per hour. LS60V and LS40V Standard Features • On-the-fly component centering with top & bottom cameras • Automatic 4-position nozzle changer with 4 nozzles • Friendly easy to use Windows® based software for panelized boards, self diagnostics, error recognition, fault monitoring and more! • Automatic fiducial correction • Positional resolution of 0.0000787" (2pm) with closed loop micro step driven motion control and digital encoders 165 Boro Line Road • King of Prussia, PA 19406 • USA Phone: 610-337-3050 • Fax: 610-337-3054 • www.ddmnovastar.com •

Open the catalog to page 1

LS60V Pick and Place Machine with Vision - 2

ick and Place Control Panel Fite Units Setup Window Prmt Help Pattern Recognition System Setup Live Video S tatus: J O N Selected Inspection H«l»l»-lffl ■flalBl»lrt| mi '-9' Head -j- 33 Large F.O.V -J- 65 Settings Threshold Enter Light VISION SYSTEM: NEW PATTERN WIZARD [STEP No.II Selected Pattern EXISTING PATTERNS EXISTING COMPONENTS Delete Pattern £* Pick and Place Contro. The vision software is Windows® based to allow easy straightforward teach-in, requiring minimal operator training. 165 Boro Line Road • King of Prussia, PA 19406 • USA Phone: 610-337-3050 • Fax: 610-337-3054 •...

Open the catalog to page 2