Automatic & Manual Stencil Printers
4Pages

{{requestButtons}}

Catalog excerpts

Automatic & Manual Stencil Printers - 1

Automatic & Manual Stencil Printers Automated Production Systems SPR-10 manual stencil printer SPR-45 automatic stencil printer with stand option SPR-45 semiautomatic stencil printer The DDM Novastar Stencil Printers range from manual to semi-automatic to automatic. DDM Novastar Stencil/Screen Printers are designed for low to medium volume assembly runs. Precise X,Y, Z, and theta axis controls allow for accurate, consistent deposition of solder paste or masking material for SMT. These durable, easy-to-use systems provide repeatable and reliable results. A unique "Foil-Frame" adapter kit is available for all models to mount frameless stencils (foils). This option greatly reduces stencil costs. DDM Automated Production Systems • Rugged welded steel frame is precision engineered for fine-pitch electronics • Fine X, Y, Z and Ø adjustments for exact stencil-to-board alignment • Quick, easy stencil changeover for short setup times • Squeegee holder accepts polyurethane or metal blades • Clear Lexan ® fixture provides quick and easy print alignment and set-ups • Foil-frame option for mounting frameless stencils 165 Boro Line Road • King of Prussia, PA 19406 • USA Phone: 610-337-3050 • Fax: 610-337-3054 • www.ddmnovastar.com •

Open the catalog to page 1
Automatic & Manual Stencil Printers - 2

AV£. DDM Novastar Automated Production Systems Automatic & Manual Stencil Printers for Low to Medium Volume SMT Production The SPR-10 is a cost effective manual stencil printer with a quick and easy registration method. The operator simply holds the frame on opposite edges, manually aligns the stencil openings to the board land patterns, locks the frame, and applies solder paste. The model SPR-10 uses the same tubular and foil frames as the SPR-20 printer. • Unique alignment registration system • Lowest cost APS manual stencil printer Unique “Foil-Frame” option An adapter frame kit is...

Open the catalog to page 2
Automatic & Manual Stencil Printers - 3

Automatic & Manual Stencil Printers for qDM Low to Medium Volume SMT Production SPR-40 & SPR-45 The SPR-25 benchtop, manual stencil printer is designed for low to medium volume surface mount assembly runs. Fine X,Y, Z, and theta adjustments for exact stencil-to-board alignment result in precise, fine pitch printing of solder paste. • Dual squeegee for clean and convenient application of solder paste • Linear ball bearing guide assures smooth squeegee stroke with its unique adjustable angle-of-attack for precise single or dual direction printing • Fine X, Y, Z and 0 adjustments for...

Open the catalog to page 3
Automatic & Manual Stencil Printers - 4

*220/240 VAC available DDM 165 Boro Line Road • King of Prussia, PA 19406 • USA Phone: 610-337-3050 • Fax: 610-337-3054 • www.ddmnovastar.com • info@ddmnovastar.com

Open the catalog to page 4

All APS Novastar catalogs and technical brochures

  1. GF-125 HC/HT

    2 Pages

Archived catalogs