Network Technology
18Pages

Network Technology ... the perfect shell for valuable electronics 9.1

Network Technology Small LAN cabinet beginning on page 9.4 • compact size • for use in small data and telecommunications copper wire and fibre-optic networks 19" fibre-optics breakout box page 9.12 • integrated tension relief for fibre-optic cables • front panels for various plug-in connections available • fibre-optic splice cassette can be built in 9.2 Fibre-optics splicing cabinet beginning on page 9.6 • space-saving • various installation options • 3 models available 19" splice box, 1 U page 9.13 • 2 models available: - fixed installation - extractable • front panels for various plug-in...

wall-mounting enclosure beginning on page 9.9 • 10" installation dimensions (254mm) • for SoHo use • variable cable entry with tension relief Other network products • see chapter 2 "Wall-Mounting Enclosures" • Vari 2000 wall-mounting enclosure . . 2.4 • Vari 500 wall-mounting enclosure . . . 2.10 • see Chapter 1 "Cabinet Systems" • network cabinet system 316 . . . . . . . . . .1.4 • LAN cabinet 315 . . . . . . . . . . . . . . . . . . . .1.27 19" Cu patch panels page 9.11 • suitable for data transfer in high-speed LAN's with transfer rates > 100Mbit/s • for industrial use in compliance with...

213 • Small LAN distribution cabinet Small LAN distribution cabinet • small-size enclosure • patch space and cable entry area are separated by two lockings and removable doors with different locking systems • modular patch panel frames can hold four 3 U/8 HP front panels and are suitable for mixed data connector use (fibre-optics/Cu hybrid population) • active components like mini UB's can be integrated easily • cable entry opening with top and bottom brush, through PG 16 cable screws • can also be delivered pre-wired Sample configuration with mini UB CAT.5 and LSA PLUS Specifications...

Small LAN distribution cabinet • 213 Accessories Fibre-optics splice cassette/cover Fibre-optics front panel, 3 U, 8 HP Fibre-optics splice cassette holder • fits the unassembled small fibre-optics cabinet • front panels are numbered • up to 4 front panels can be installed in the small distribution cabinet Fibre-optics splice cassette with 4 cable/ wire entries; one diagonal insertion area has 3 exit options. Fixing bracket is built into the cassette splice area. Up to 10 splice cassettes can be installed in the fibre-optics splicing cabinet. LxWxH: 155mm x 92mm x 8mm Material: ABS, bright...

213 • Fibre-optics splice case Fibre-optics splice case • space-saving small modular enclosure • up to 10 splice cassettes can be installed • components mount easily inside the cabinet through the removable door • fibres are kept neat and orderly with four cable hoops • 3 models available • additional components can be integrated: two 10 DA terminal strips or 12-port fibre-optics patch panel or additional splice cassette fixings • can also be delivered pre-wired Sample configuration, model 1 Specifications Application: The fibre-optics case holds up to ten splice cassettes, two 10 DA...

Fibre-optics splicing case • 213 Accessories Fibre-optics splice cassette/cover Fibre-optics splicing case, pre-wired Fibre-optics patch panels The fibre-optics splice case can also be delivered with pre-wired fibreoptics technology. Pre-wired means: Fibre-optics splice cassette with 4 cable/ wire entries; one diagonal insertion area has 3 exit options. Fixing bracket is built into the cassette splice area. The patch panel can be mounted over two splice cassettes or used instead of a mounting device. Up to 10 splice cassettes can be installed in the fibre-optics splice case. Included in...

268 • LAN distribution case LAN distribution case • ready for apraNET module system installation • rear cable entry openings (2 openings) prepared for installation of PG16 screws • stackable using special stacking adapters • for all 3 U, 8 HP components Specifications Application: The LAN distribution case can hold all 3 U, 8 HP apraNET components and is therefore equipped for a variety of applications. Finish: Top/bottom covers: RAL 7035 light grey Side extrusions: RAL 7032 pebble grey Delivery: assembled H x W x D: 75mm x 213mm x 290mm Sample configurations Included in delivery This...

ecoVARI 10" wall-mounting enclosure, 6 U • for SoHo use • cable entry from above or below • 10" installation dimensions (254mm) • installation height, 6 U • integrated brushes and tension relief The flexible ecoVARI enclosure system is designed to be used in small networks (SoHo). Cable entry openings can be on the bottom or top and are protected with a brush. Tension relief can be provided to cables by integrated strips. 10" shelves can be installed in addition to passive patch panels to accommodate non-standardized active components in the enclosure. Photograph does not correspond to...

wall-mounting enclosure Accessories 10" CAT.6 distribution panel • with 6x RJ45 - CAT.6 distribution panel Finish: RAL 7035 light grey 10" cable entry opening • with shelf (holds one splice cassette) Finish: RAL 7035 light grey Finish: RAL 7035 light grey Description: for 6 x ST coupler for 6 x SC-D coupler Splice cassette Splice cassette cover Plug-in shelf • shelf, complete with integrated tension relief • required for installing 19" components in cabinets or enclosures Finish: RAL 7035 light grey brush, black Finish: RAL 7035 light grey Included in delivery: • 50 screws, M5 x 12 • 50...

19" copper distribution panel • 213 19" copper CAT.5e/CAT.6 distribution panel • suitable for data transfer in high-speed LAN's with transfer rates > 100Mbit/s • for industrial use in compliance with EN 50081-2 and 50082-2 (shielded models only) • wires connected by coloured (in compliance with EIA/TIA 568A) LSA Plus IDC method of termination • in shielded models, large-area shielding contact takes place directly on the PCB using cable clips provided without additional twisting of braided shield (CAT.6 panel) • distance between connectors and shielding contact points on the PCB prevents...