Technical Datasheet Part of the On-line Analyzers Suite www.applitek.com Series of On-line TOC Analyzers Cost-eecƟve monitoring of organic compounds in a wide array of water matrices A wide array of applicaƟons The standard conguration of the AppliTOC® is based on the TOC methodology by hot-aerosol phase UV/persulfate. The analytical mainframe can also be congured to: Continuous, on-line monitoring of organic carbon and carbon compounds in various environmental and industrial process applications: • True Total Organic Carbon or • Surface water • Total Inorganic Carbon or • Boiler feed water • Total Carbon • Cooling water • Waste water Advanced features • Industrial waste water • Smart features and add-on units reduce down-time and High analyƟcal performance unnecessary checks substantially • Built-in carbon removal system for purifying instrument air • True continuous analysis principle • Unique range-specic solid state IR detectors with • Low limits of detection (LOD) thanks to high volume automatic zero calibration • Up to three (3) sampling points possible • Incorporated industrial PC with AppliTek controller software sampling and range-specic, sensitive NDIR • Smart features: automatic calibration, validation and cleaning • High sensitivity and selectivity • Samples with salt content up to 2% possible • Factory congured, tested and calibrated Master s in AnalyƟcal Technology.

2 | Series of On-line TOC Analyzers Smart funcƟons Total Organic Carbon analysis has been classied as a non-specic analysis method to determine the organic compounds in water. Its inherent accuracy and speed, combined with a low cost of ownership make it a preferred (standard) analysis method in many countries and industries. AppliTek has taken this concept a step further with the development of the AppliTOC® Series of On-line TOC Analyzers. have been eld-tested for many years in a wide range of applications and environments. A high sample ow rate not only assures low levels of detection (range...

3 | Series of On-line TOC Analyzers OpƟmal oxidaƟon eciency DeterminaƟon of Total Inorganic Carbon Although all UV/persulfate TOC analyzers employ similar basic techniques, AppliTek has challenged the boundaries of this technology. AppliTOC® uses an adapted version of the standard TOC method in accordance with standard methods USEPA 415.2, ISO 8245 and DIN-EN 1484, by netuning the oxidation process and optimizing its core performance: Total Inorganic Carbon (TIC) includes all compounds coming from the inorganic carbon removal stage, and includes the purgeable organic carbon (POC) and the volatile...

4 | Series of On-line TOC Analyzers Technical specicaƟons AnalyƟcal unit Analysis method Hot-aerosol UV / persulfate method 220 - 240 VAC, 10 A, 50 Hz Other voltages available on request Measuring ranges Backlit touchscreen, brightness adjustable One single range, factory set: 0 – 5 mg C/L Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air Demineralized water For rinsing, calibration and/or dilution Standard conguration Total Organic Carbon as non purgeable organic carbon (NPOC) Atmospheric pressure, vented, min. Ø 64 mm Other congurations Dry and clean earth pole...