PE Planetary Gearheads
6Pages

Unparalleled: This planetary gearbox maintains its maximum efficiency even at the highest speeds PE Planetary Gearheads are notably light and extremely powerful, yet suitable for complex production cycles due to a low friction bearing design and optimized lubrication. A genuine powerhouse at an attractive price.

High performance at a fair price: This principle also applies to our PE planetary gearbox. It is powerful, yet efficient, and delivers a high performance for attractive acquisition costs. 1 Low heat generation at the highest speeds Even in extreme situations, the PE will never let you down thanks to its low-friction bearing design and optimized lubrication. The low heat generation allows a continuous high speed without sacrifice to performance. The PE excels with its above-average weight to torque ratio, and it is 25% lighter than comparable conventional drives. You accordingly benefit from...

Technical data Code Gearbox characteristics Service life Efficiency at full load (2) Protection class Standard lubrication Food grade lubrication Installation position Standard backlash Nm/arcmin (lbf.in/ arcmin) Housing: Steel – nitrocarburized and post-oxidized (black) Running noise (4) Max. bending moment based on the gearbox input flange (5) Motor flange precision Output shaft loads Static radial force (7)(8) Static axial force (7)(8) Tilting moment for 20,000 h (6)(8) MK 20.000 h Tilting moment for 30,000 h (6)(8) MK 30.000 h Mass moment of inertia (2) *Contact Applied Motion Products...

Technical data Output torques Nominal output torque (3)(4) *Contact Applied Motion Products for Price and Availability of 120 and 160 mm Gearboxes. (1) (2) (3) (4) (5) Ratios (i=n1/n2) Number of stages Application specific configuration with NCP Values for feather key (code “A”): for repeated load 30,000 rotations of the output shaft permitted; see page 128

Technical data Output torques 40 (354) Emergency stop torque *Contact Applied Motion Products for Price and Availability of 120 and 160 mm Gearboxes. (1) (2) (3) (4) (5) (6) Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP See page 128 for the definition Average thermal input speed at 50% T2N and S1 Max. mechanical input speed (4) Average thermal input speed at T2N and S1(4)(5) Input speeds

Drawing corresponds to a 60PE / 1-stage / output shaft with feather key / 11 mm clamping system / motor adaptation – one part / B5 flange type motor Pitch circle diameter output Shaft diameter output Shaft collar output Centering diameter output Housing diameter Mounting thread x depth Housing length Shaft length output Centering depth output Clamping system diameter input Motor shaft diameter j6/k6 Max. permis. motor shaft length Min. permis. motor shaft length Centering diameter input Motor dependent Centering depth input Pitch circle diameter input Motor flange length Diagonal dimension...