LOAD CELL Robust Construction Simple Installation High Performance Options Available Other Ranges Available on request Equivalents to other manufacturers' available Load Buttons Different Cable Lengths Full range of mounting options available (consult ATEX Certificate: E Ex ia MC T6 (DBBW only) The DBB series S-beam load cell is designed for force measurement and weighing applications alike. It's ease of mounting makes it very attractive for use as a general purpose load cell. There are two versions available within the standard range. The DBBE, an encapsulated cell sealed to IP67 covering ranges of 50kg to 1000kg and a fully welded cell, the DBBW, sealed to IP68 covering ranges of There are many options that are available to further enhance the usefulness of this series of load cells, as well as higher accuracy versions. Sense wires are provided on each of the load cells to compensate for changes in lead resistance due to temperature change and/or cable extension. Sensing can be achieved by feeding this voltage into the appropriate electronics (please refer to the instrumentation datasheets). Transducer Specialists. APPLIED MEASUREMENTS LIMITED_ 3 MERCURY HOUSE - CALLEVA PARK - ALDERMASTON - BERKSHIRE - RG7 8PN - UK

Wiring Schematic Diagram MOTF Sense wires on DBBW only (as standard) This wiring gives a +ve output in compression (both ends) (Note: Cable gland is centrally aligned on DBBE models) APPLIED MEASUREMENTS LIMITED Continuous product development may result in minor changes to published specifications.