Static Rated & Fatigue Rated Low Profile Tension & Compression PANCAKE LOAD CELL Stainless Steel Construction Low Profile Shear Design High Natural Frequency Excellent Rejection of Extraneous Optionally Fatigue Rated to IO9 Fully Reversed Full Range Cycles Shunt Calibration Facility Options Available Other Ranges Available on request Higher Accuracy Versions available (consult factory) Equivalents to other manufacturers' available Full range of mounting options available, including:- Load Buttons Standard and Special Mounting Base Different Centre Thread Sizes (consult factory) Integral Cable Versions (consult factory) Double Bridge Versions The DSCC series low profile pancake type load cells are suitable for both Weighing and Force Measurement Constructed from Stainless Steel to give the best performance whilst still offering a very attractive looking The load cell's design provides excellent resistance to extraneous forces, such as bending, side and torsional The load cell is used widely in material and fatigue testing applications, where a low physical height is required and forces are applied axially. High frequency response is also a benefit with this load cell for dynamic force measurement applications, which is also complimented with excellent fatigue resistance. As with all the other Applied Measurements sensors, they can be supplied complete with monitoring/control electronics and calibrated as a system (please refer to the Instrumentation datasheets). Transducer Specialists. APPLIED MEASUREMENTS LIMITED_ 3 MERCURY HOUSE - CALLEVA PARK - ALDERMASTON - BERKSHIRE - RG7 8PN - UK

^Optional Mounting Base If you require rod end bearings please request an M64 x 4 thread. Note that the maximum rated safe static load on this size rod-end is 689kN APPLIED MEASUREMENTS LIMITED Continuous product development may result in minor changes to published specifications.