Stainless Steel Low Profile Compression LOAD CELL CBES Series

Product catalog summary

Description: The CBES series is a range of low profile, compact load cells designed for measuring compressive forces. Suitable for both force measurement and weighing applications, its compact size allows for easy installation in limited spaces and retrofitting. The low height is advantageous in weighing systems as it does not increase the required headroom for vessels. The CBES can be supplied with monitoring/control electronics and calibrated as a system.

Key Features:

Capacities range from 50kg to 50000kg.
Sealed to IP67 for environmental protection.
Low profile design with an integral load button.
Robust construction with a 3-year warranty.

Options Available: Standard and special mounting bases, a full range of mounting options, special sizes, and other ranges are available upon request.

Specifications:

Wiring Schematic: +ve Excitation (Red), -ve Output (Yellow), +ve Output (Green), -ve Excitation (Blue).
Rated Capacities: 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000, 30000, 50000 kgf.
Rated Output: 2.0 mV/V ±0.5%.
Non-Linearity, Hysteresis, Repeatability: <0.15% of Rated Output.
Zero Balance: <1.0% of Rated Output.
Temperature Range: Operating -20 to +80°C, Compensated -10 to +70°C.
Temperature Effect: On Output <0.010% of Applied Load/°C, On Zero <0.010% of Rated Output/°C.
Safe Overload: 150% of Rated Capacity, Ultimate Overload: 300% of Rated Capacity.
Excitation: Recommended 10 Volts AC or DC, Maximum 15 Volts AC or DC.
Input Impedance: 700 nominal Ohms, Output Impedance: 750 nominal Ohms.
Insulation Impedance: >2000 Megaohms.
Deflection at Rated Capacity: <0.4 mm.
Weight varies by capacity, ranging from 0.35 kg to 7.5 kg.
Construction: Stainless Steel.
Cable: 3 Metre 4 Core Screened.

Dimensions: Detailed dimensions are provided for various capacities, indicating diameter, height, and weight specifications.

Contact Information: Applied Measurements Limited, 3 Mercury House, Calleva Park, Aldermaston, Berkshire, RG7 8PN, UK. Tel: (+44) 0118 981 7339, Fax: (+44) 0118 981 9121, Email: [email protected], Website: www.appmeas.co.uk.

Catalog excerpts

Stainless Steel LOAD CELL Integral Load Button Robust Construction Options Available Standard and Special mounting bases Full Range of mounting options available (consult Factory) Special sizes available on request Other ranges available on request The CBES is a range of low profile compact load cells and is designed for the measurement of compressive The CBES is equally suited for both Force Measurement and Weighing applications alike. It's compact size means that it can be fitted in to the smallest of space envelopes and is often retrofitted. In weighing systems, the low height gives an added benefit in that it does not increase the headroom required for vessels and is The CBES as with all the other Applied Measurements sensors can be supplied complete with monitoring/control electronics and calibrated as a system (please refer to the Instrumentation datasheets). Transducer Specialists. APPLIED MEASUREMENTS LIMITED_ 3 MERCURY HOUSE - CALLEVA PARK - ALDERMASTON - BERKSHIRE - RG7 8PN - UK

Open the catalog to page 1