Catalog excerpts
DSJ1 Strain Gauge or Load Cell Digitiser Module (1 Channel) Features Bus connections for communication and power supply 2 part connectors for field terminals D type 9 pin connecter for easy communications connection Green LED power indicator Red LED digital output indicator Push switch to simulate digital input Option to terminate bus through 120 ohm resistor CAN compliant - option 3 x screen clamps for EMC termination 3 year guarantee Introduction The function of the DSJ1 is to enable the easy connection of a load cell and a DSC Card for communications to a PC or PLC. Designed to take one DSC Card or DCell in a single enclosure, the DSJ1 offers a convenient and practical solution to the installation of digital load cells with platforms, silos and any weighing systems where connection to PC and PLC’s is an essential requirement of the system. When a DSC card or DCell is fitted to the DSJ1 PCB it will enable the connection of a load cell via a two-part connector, with a five-way two-part connector for the communications output and a D type 9 pin connector, as well as connections for digital inputs and outputs and external temperature sensor. The communications output connection is RS232, RS485 or CAN depending on the DSC unit used. Supplied as an OEM device on a single 135 x 73mm PCB, it has options for fitting in an IP65 ABS Case, or to a DIN rail fixture. Specifications Connection 1 x 8 way 2 part terminal for load cell and temperature sensor connections (2.5mm² cable max) 1 x 5 way 2 part terminal for Digital Data and Power (2.5mm² cable max) 1 x 3 way 2 part terminal for DSC digital I/O 1 x 9 way D type connector for digital data 135 x 73 x 18mm PCB only Enclosure Material Sealed to IP65 with cable entries via IP67 glands (when supplied with option of enclosure) Options Supply of ABS enclosure On board temperature sensor Mounting alternatives: DIN rail option Product Order Codes Description DSJ1 (pcb only) IP65 ABS Grey Case CE & Environmental Storage temperature Operating temperature Relative humidity Safety/Low Voltage Directive EMC Directive -20 to +70ºC -10 to 50ºC 95% maximum non condensing 73/23/EEC amended by 93/68/EEC BS EN 61010-1:2001, IEC 1010-11990 89/336/EEC Basic Standard BS EN 61326:1998
Open the catalog to page 1Mechanical Dimensions 160mm 122mm Shield Clamp Shield Clamp Load Cell DSC Card Shield Clamp Manual Refers Depth 55mm Shield Clamp: Farnell part nos 353- 8266, 853-8278 or 353-8280 depending upon cable size used. 3 x IP65 Gland for cable size 4.5 to 7mm Fixing Centres of M4: 122 x 58mm Shield Clamp Detail Cable Clamp Shield Outer Insulation Select connections to Dtype, RS232 or CAN/RS485 Provides 120R terminating Resistor for CAN/RS485 Selects on board temperature sensor or external device connected to J2 Connects digital output to Output LED J3 D Type Connector Detail Designed, Manufactured...
Open the catalog to page 2All Applied Measurements catalogs and technical brochures
-
T24-HR
2 Pages
-
T24-HA
2 Pages
-
T24-HS
2 Pages
-
T24-BSi
2 Pages
-
T24-BSue
2 Pages
-
T24-BSu
2 Pages
-
T24-ACM
2 Pages
-
T24-RA
2 Pages
-
T24-TA
2 Pages
-
T24-PA
2 Pages
-
T24-IA
2 Pages
-
T24-SAf
2 Pages
-
T24-SA
2 Pages
-
SY021
2 Pages
-
TR200
2 Pages
-
TR150
2 Pages
-
DSJ4
2 Pages
-
DCell
4 Pages
-
CCG series
2 Pages
-
AMLJBNA
1 Pages
-
DSC-USB
3 Pages
-
DSC
4 Pages
-
ICA
2 Pages
-
SGA-A-and-SGA-D
2 Pages
-
The Digiforce®
2 Pages
-
Rotary - Flanged YDFF
2 Pages
-
Static - Square Drive DTD-S
1 Pages
-
Miniature LVDT AML/M
2 Pages
-
Depth/Level Transmitter
2 Pages
-
Industrial - Field Adjustable
2 Pages
-
Column Load Cell - Compression
2 Pages