3DLevelScanner II High Temperature Total inventory management Changing the market from level to volume

Cement Silo’s Diagram of a Modern Cement Plant 1 Precalciner 2 Cement Mill Additive Silo’s Clinker Storage Cooler Rotary Kiln Raw Mill Drier Raw Mill Storage Crasher 1 Clinkers 2 Cement More than a billion tons of cement are manufactured every year. The finishing process requires clinkers, typically chunks or nodules with 1 to 10 mm diameters that ultimately serve as the binding agent for cement. Clinkers are produced by burning and grinding a limestone with clay or shale in a multistage process involving extremely high temperature (up to 1450° C / 2642° F) in a clinker kiln and extremely harsh...

3DLevelScanner II Alumina The aluminum industry is dependent upon a steady supply of alumina (aluminum oxide) as its basic raw material. Several steps are involved in the extraction of alumina from ore and clay rich in aluminum, primarily bauxite, to make it suitable for actual aluminum production. The last step in the process, calcination, takes place in a kiln at 1100°C (2000°F) and removes the chemically combined water from the alumina hydrate, resulting in the very fine white powder, alumina. The alumina is still relatively hot – 70° to 100°C (194° to 212°F) when it enters the storage silo....

APM - get accurate 3DLevelScanner II GSM/GPRS APM Automation Solutions Ltd. ATIDIM High-Tech Industrial Park Building 2 P.O. Box 58171 Tel Aviv 61580, Israel Tel: +972 3 6488891 Fax: +972 3 6488892 [email protected] www.apm-solutions.com © 2011 APM Automation Solutions Ltd. All rights reserved. Information in this document is subject to change without notice. APM Automation Solutions Ltd. and the APM Logo, are trademarks, and the 3DLevelScanner is a registered trademark of APM Automation Solutions Ltd. BROO000110 4…20 mA/HART RS485/Modbus