*mydirectindustry

3DLevelScanner HC

Product catalog summary

Overview: The 3DLevelScanner HCTM is an advanced technology designed to measure corrosive materials in silos, providing accurate volume and material profile information. It is built with high-performing materials to withstand harsh environments and is suitable for use with various corrosive substances.

Specifications:

Materials: HALAR coating for mechanical parts, VITON for O-rings, specially coated stainless steel fasteners.
Weight: 5.6 Kg (12.35 lb).
Output: Active 4...20mA/HART/RS485/Modbus with a resolution of 10 µA.
Communication: RS485/Modbus/HART.
Ambient Conditions: Temperature range from -40 to 85˚C (-40 to 185˚F).
Process Conditions: Vessel pressure from -0.2 to 3 bar (-2.9 to 43.5 PSI).
Power Supply: 18 to 32 VDC, max power consumption of 1.5 W at 24VDC.
Protection: IP67 according to IEC 60529.

Functionality: The device uses three antennas to generate low-frequency acoustic signals, providing a detailed view of the material's surface for high accuracy volume measurements and a 3D representation of material formation. It is compatible with PLC or SCADA systems for real-time monitoring.

Applications: Suitable for materials on the USA’s DOT class 8 material list, including Acetic Acid, Ammonium Hydroxide, Benzene, Calcium Hydroxide, Hydrochloric Acid, Methanol, Nitric Acid, and Sulfuric Acid.

Technical Features:

Frequency: 2 KHz to 10 KHz.
Beam Angle: 30 - 70 degrees.
Display: LCD with 4 lines x 20 characters.
Vibration Resistance: Mechanical vibrations with 2g and 5 to 200 Hz.

Compliance: Conforms to CE, EMC, and FCC regulations, ensuring emission and susceptibility standards are met.

Catalog excerpts

Advanced technology for measuring corrosive materials in silos to provide accurate volume and material prole information Changing the market from level to volume

Open the catalog to page 1

The 3DLevelScanner HCTM is designed using high performing materials to protect it from the harshest and most corrosive materials and allow it to measure in production and storage of quick lime, ammonia, PTA, oils, salts, salt mines and many other harsh materials and environments. This has been achieved by using the right protective high performing materials: • HALAR coating for the mechanical parts • VITON for the O-rings and rubbers • Specially coated stainless steel fasteners This allows the 3DLevelScanner HCTM to maintain its dust-penetrating ability as well as the ability to measure even...

Open the catalog to page 2

Technical Data Materials, non-wetted parts Housing Painted aluminum die casting Inspection window in housing corrosive resistant coated aluminum die casting 3DLevelScanner Output variable Output signal Fault signal Current output unchanged, 22 mA, >3.6 mA (adjustable) Current limitation Maximal Load Communication Type Ambient conditions Ambient, storage and transport temperature Process conditions Vessel pressure Process temperature Measured on the process tting Vibration resistance Mechanical vibrations with 2g and 5...200 Hz Electromechanical data Cable entry/plug 1 x M20x1.5 (cable-Ø 8...12mm),...

Open the catalog to page 3

with horn antenna in threaded version Corrosion resistant seal Corrosion resistant coating Sharon Shoham Graphic Design Changing the market from level to volume APM Automation Solutions Ltd. www.apm-solutions.com | [email protected]

Open the catalog to page 4

3DLevelScanner HC

3DLevelScanner HC

Catalog excerpts

All APM Automation Solutions Ltd. catalogs and technical brochures