- Catalogs
- APLISENS S.A.
- PRODUCT CATALOGUE 2026/2027
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
PRODUCT CATALOGUE 2026/2027
PRODUCT CATALOGUE 2026/2027
- Smart Pressure Transmitter APC-2000ALW: Features a 4-20 mA output signal with HART protocol, high accuracy, and safety certifications such as SIL2/SIL3 and ATEX. It is suitable for gases, vapors, and liquids, with a robust casing and IP66/IP67 protection.
- Devices designed for differential pressure measurement in pressurized environments.
- Protect pressure measurement devices from harsh conditions.
- Specifications and applications of valves and accessories used with measurement devices.
- Details on hydrostatic level measurement systems.
- Systems designed to measure flow rates in industrial applications.
- Devices for accurate temperature measurement and transmission.
- Different types of temperature sensors and their applications.
- Devices for measuring environmental parameters.
- Devices for recording measurement data over time.
- Digital devices for displaying and controlling measurement data.
- Power and signal management devices used in measurement systems.
- Devices for controlling valve positions in pneumatic systems.
- Tools and software for configuring and communicating with HART-enabled devices.
The PCE-28 pressure transmitter is designed for measuring pressure, underpressure, and absolute pressure of gases, vapors, and liquids. It features a piezoresistant silicon sensor and offers a wide range of pressure measurements. The transmitter provides a 4-20 mA two-wire or 0-10 V output and is certified for intrinsic safety and marine applications.
The transmitter is lightweight and can be installed without additional mounting brackets. For steam or hot media, a siphon or impulse line is recommended.
The PCE-28.Modbus transmitters have two modes: configuration mode for setting changes and diagnostics, and Modbus mode for standard operations.
Various models and configurations are available, including options for Exia and Exd certifications, marine certificates, and specific process connections.
The transmitter offers high accuracy and stability, with a thermal error range and response time specifications.
The transmitter is suitable for use in explosive environments with appropriate Ex power supplies.
Available accessories include stainless steel tag plates, mounting brackets, and diaphragm seals.
- Specifications: Measurement range options, special glycerine version, process connections, material certificate, NACE compliance, IP65 protection, stainless steel construction, accuracy of 1%.
- Use: Suitable for contaminated, viscous, solidifying, high/low temperature, chemically reactive media, and systems with mechanical vibration or pulsating pressure.
- Specifications: 4-20 mA output signal with HART protocol, display with backlight, SIL2/SIL3 safety version, intrinsic safety and explosion-proof certificates, programmable settings, static pressure limit up to 1000 bar, accuracy of 0.075%.
- Applications: Measurement of differential pressure of gases, vapours, and liquids.
- Accuracy: ±0.05% and ±0.1% for different configurations.
- Static Pressure: Options for 320 bar, 413 bar, and 1000 bar.
- Protection Class: IP67.
- Communication Protocol: HART 7.
- Ranges from 0-70 bar to -7 to 7 mbar.
- Various thread options including 1/4NPT, G1/2”, and 1/2”NPT.
- Wetted parts available in SS316L, Hastelloy C276, Gold plated, and Tantalum.
- Electrical connections include M20x1.5 packing gland and 1/2”NPT Female.
- Configurable parameters include pressure units, range start and end points, and output signal characteristics.
- SIL2/SIL3 safety versions available.
The document outlines various certifications and classifications for explosion-proof and intrinsically safe equipment.
The document provides detailed procedures for configuring transmitters to measure liquid levels, density, and phase boundaries.
The equipment complies with various international standards for explosion-proof and intrinsically safe devices.
Recommendations include ensuring proper installation and connection of impulse lines to prevent dust ingress and measurement errors.
The document specifies nominal measuring ranges, accuracy, thermal error, and electrical parameters for the transmitters.
The document includes guidelines for operating conditions, such as temperature ranges and overpressure limits.
- Temperature Range: Operating temperature for standard and Exia versions is -25 to 80°C.
- Pressure Range: Various measuring ranges are available.
- Accuracy: The accuracy is ±0.1% of the calibrated range.
- Materials: Wetted parts and diaphragms are made of 316L stainless steel.
- Intrinsic safety and explosion-proof certificates are available for various versions.
- Transmitters can be installed directly onto impulse lines or mounted using Aplisens mounting brackets.
- Overload capacity up to 413 bar total static pressure.
- Accuracy of 0.25% with various measuring ranges.
- Certificates for intrinsic safety, explosion proof, and marine applications.
- Measuring range options include 0...16 mbar to 0...25 bar.
- Various process connections are available.
- Suitable for measuring pressure, underpressure, and differential pressure in gases.
- APM-2 model offers modular construction for hydrostatic level measurement in closed tanks.
- The APM-2 transmitter measures differential pressure, static pressure, and temperature.
- Measuring ranges vary from 0-1 bar to 0-60 bar.
- The central unit casing is made of aluminum, with an option for SS316.
- Various diaphragm seal types are available.
- Model codes and descriptions are provided for different configurations.
The document provides detailed specifications and guidelines for various types of diaphragm seals used in pressure measurement systems.
- Diaphragm Seal Types: Includes chemical flanged seals, threaded seals, and sanitary diaphragm seals.
- Installation: Diaphragm seals can be installed directly or remotely.
- Thermal Zero Error: Recommendations to minimize errors due to thermal expansion.
- Options for non-reactive filling liquids, gold-plated wetted parts, and seals for high-temperature applications.
- Pressure Limits: Overpressure limits are generally 40 bar.
- Diaphragm seals are used in various industries, including chemical, food, and pharmaceutical.
Thermal Error Reduction: The thermal errors in diaphragm seals decrease proportionally to the cube of the active diameter of the separating diaphragm.
VM-3 and VM-5 Valve Manifolds: These manifolds are used with pressure transmitters for operations like starting up and zero setting.
Application: The SP-10 is used for non-contact level measurement of liquids or bulk materials in tanks and silos.
- Output Options: Offers digital outputs and an active analog output.
- Applications: Designed for measuring liquid levels in tanks, deep wells, and narrow diameter piezometers.
- Applications: Suitable for environments where stainless steel cannot be used.
- Ensure proper installation to avoid mechanical damage and maintain accuracy.
The document outlines the specifications for various electronic and sensor components.
The APC-2000ALW/L level probe is designed for measuring liquid levels in tanks, deep wells, or piezometers.
The document provides detailed technical data, including accuracy, long-term stability, thermal error, and compensation range.
The document includes ordering procedures for various models and configurations.
Level switches are designed for signaling limit levels or two-state control of liquid levels in vessels.
The document also covers accessories like junction boxes and mounting brackets.
The document outlines various technical specifications for equipment such as level switches and electromagnetic flowmeters.
Level switches like ERH-11-20 and ERH-01-18 are designed for use in harsh conditions.
The PEM-1000 and PEM-500 flowmeters are designed for bidirectional measurement of liquids.
For the PEM-1000, the nominal size ranges from DN10 to DN1000.
The document includes detailed ordering procedures for various equipment.
- Nominal Diameter: DN10 to DN1000.
- Ensure the sensor pipe is fully filled with liquid for accurate measurement.
- Handled via RS485 and Modbus RTU protocol.
- IP68 sensor protection, 304 stainless steel construction.
- Minimal electrical conductivity: ≥5 µS/cm.
- Material: Stainless steel 304 for flow elements.
- Similar specifications to the Orifice Type Flowmeter ZPS.
- Features: Long-term accuracy, low installation costs.
- Specifications: Pipe diameters 40 to 2500 mm.
- Models: LI-24ALW, LI-24G, LI-24G/AL, LI-24L, AT-3, ATX-3, ATL, PT-25.
- Transmitters can be configured for specific sensor types and measurement ranges.
- Transmitter Configuration: Can be set for one or two measurement channels.
- Factory Settings: Default configurations include Pt100 sensor type.
- Safety Certifications: Includes ATEX and IECEx certifications.
- Suitable for industries such as power, chemical, petrochemical, marine, offshore, heavy industry, food, and machine building.
- Temperature Range: RTD sensors operate between -196 to +600°C.
Temperature sensors are designed for a wide range of applications.
The sensors are certified under various ATEX standards.
The sensors feature stainless steel casings and wetted parts.
Customers can specify the sensor type, process connection, housing type, measuring element, class of element, and length of immersion part.
These sensors are suitable for chemical applications, metal alloys industry, machine building, and temperature measurement in motors and bearings.
Thermowells and sensors are available in various diameters and lengths.
Humidity and temperature transmitters are also available.
- Accuracy and Measurement: Thermocouples have an accuracy of ±0.2% of range ±1 digit.
- Data Logging: Devices can record data at intervals ranging from 1 second to 8 hours.
The document describes the PMS-90R, a data logging device with an 8 MB memory capacity.
- Input Signals: Supports U/I (0/4–20mA, 0/1-5V, 0/2-10V) and RTD/TC (Pt100, Pt500, Pt1000, TC types K, S, J, N, R, B, E).
The PMS-90R is configured using six keys on the front panel.
- Ordering Code: PMS-90R/___/___/___/___ with options for power supply, type of input, number of channels, and USB interface location.
The document also details various digital indicators and controllers.
The devices are applicable in environments requiring precise measurement and control.
- Specifications: The UZ-2 barrier consists of diode transiles, resistors, and gas arresters.
- Specifications: Suitable for linear and rotational actuators.
- Raport 2 Software: Facilitates communication and data transfer from transmitters.
Catalog excerpts
PRESSURE • FLOW • LEVEL • TEMPERATURE • HUMIDITY
Open the catalog to page 1
I Devices for measurement of pressure or level in open tanks II Devices for measurement of differential pressure or level in pressure tanks IV Valves and fitting accessories V Hydrostatic level probes, hydrostatic density transmitter VI Flow measuring systems VIII Temperature sensors XI Digital indicators, controllers XII Power supplies, isolators, signal converters, overvoltage protection XIII Electropneumatic positioner XIV Hart communication tools
Open the catalog to page 2
SMART PRESSURE TRANSMITTER APC-2000ALW ü ü ü ü ü ü ü ü ü ü 4…20 mA output signal + HART 5 / HART 7 protocol (special version: 0…20 mA or 0…5 mA output signal + HART 5 protocol) Display with backlight Programmable range, zero shift, characteristic and damping ratio with local panel keys Safety version SIL2/SIL3 Intrinsic safety certificate ATEX, IECEx, FM (USA, Canada), INMETRO (Brazil), UKEX (UK), KCS (Korea) Explosion proof certificate ATEX, IECEx, FM (USA, Canada), INMETRO (Brazil), UKEX (UK), KCS (Korea) rs 5 yea up to rranty Marine certificate – DNV, BV wa Accuracy 0,075% (0,05%, 0,04% on...
Open the catalog to page 4
Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminium alloy cast or 316SS stainles steel, degree of protection IP66/IP67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0-340° relative to the sensor, and a choice of cable direction. The communication standard...
Open the catalog to page 5
Accuracy depending on the set range p0 - error for range 30...100% FSO p1 - error for range 10% FSO P1 = 2 x p0 Numerical error values are given in the technical data under metrological parameters Wetted parts and diaphragms: 316Lss, Hastelloy C 276, Au *Gold plating is dedicated to measuring the pressure of hydrogen and gaseous media with hydrogen admixture for measurement ranges above 70 bar Material of window: hardened glass Operating conditions Operating temperature range (ambient temp.) -40...85°C (Safety: -25...85°C) Exia, IS version -40...80°C (Safety: -25...80°C) Exd, XP version -40...75°C...
Open the catalog to page 6
Ordering procedure Model APC-2000 Description Smart pressure transmitter With display, output 4-20mA + Hart With display, output 4-20mA + Hart Functional Safety certificate according to PN-EN 61508:2010 parts 1 ÷ 7, PN-EN 61511-1:2017 + PN-EN 61511-1:2017/A1:2018-03, PN-EN 62061:2008 + PN-EN 62061:2008/A1:2013-06 + PN-EN 62061:2008/A2:2016-01 Stainless steel housing Stainless steel housing, epoxy painted II 1/2G Ex ia IIC T4/T5 Ga/Gb IECEx Ex ia IIC T4/T5 Ga/Gb II 1/2G Ex ia IIC T4/T5 Ga/Gb II 1D Ex ia IIIC T115°C Da I M1 Ex ia I Ma (version with SS housing) Ex ia IIC T4/T5 Ga/Gb IECEx Ex ia...
Open the catalog to page 7
^PLISENV Code Standard display configuration Other configuration of display has to be marked upon placing order. User has no possibility of switching backlight on/off. Example: Pressure transmitter, output 4...20mA + HART, version Exia, nominal measuring range 0...7bar, calibrated range 0...6bar, process connection 1/2”NPT male, electrical connection 1/2”NPTF.
Open the catalog to page 8
SMART PRESSURE TRANSMITTER APC-2000ALM with MODBUS RTU protocol ü ü ü ü Galvanic isolation of power supply and communication bus Accuracy 0.075% Aluminum or stainless steel housing with local display Explosion proof certificate ATEX and IECEx APC-2000ALM - Aluminum epoxy painted casing APC-2000ALM/SS - Stainless steel casing Rating plate Lock preventing the casing rotation 1/2’’NPT M type 1/2’’NPT male + internal thread G1/4’’ G1/2 type G1/2", Ć4 hole M type M20×1.5, Ć4 hole M20×1.5 packing gland Ć5…10 cable or 1/2 NPT F GP type G1/2", Ć12 hole P type M20×1.5, Ć12 hole 1/2’’NPT F type internal...
Open the catalog to page 9
Pressure transmitter APC-2000ALM is designed to measure pressure, vacuum and absolute pressure of gases, vapors and liquids. The measuring element is a piezoresistive silicon sensor separated from the medium by an isolating diaphragm and manometer liquid. The electrical signal from the sensor is converted into a digital value compatible with the Modbus RTU protocol. The housing is made of high-pressure cast aluminum alloy or acid-resistant steel with IP66 protection. The transmitter is equipped with a configurable liquid crystal display. The housing design allows the display to be rotated 90°,...
Open the catalog to page 10
Ordering procedure Model APC-2000 Versions Certificates, options* * more than one option is available Measuring range Description Smart pressure transmitter With display, Modbus output Stainless steel housing II 1/2G Ex ia/db IIC T5/T4 Ga/Gb II 2D Ex ia tb IIIC T100°C Db Packing gland available on I M2 Ex db ia I Mb (version with SS housing) request Ex ia/db IIC T5/T4 Ga/Gb IECEx Ex ia tb IIIC T100°C Db Ex db ia I Mb (version with SS housing) For oxygen service (sensor filled with non-reactive fluid), only G1/2” connection Extended thermal compensation range -40 ÷ 80°C Protection class IP67 NACE...
Open the catalog to page 11
SMART PRESSURE TRANSMITTER PCE-28.SMART4...20 mA output signal + HART protocol Safety version SIL2 tt'! Intrinsic safety certificate (ATEX, IECEx) Accuracy 0,1% (special version 0,075%) Marine certificate - DNV, BV PZ type 1/2''NPT type 1/2”NPT male + internal thread G1/4” internal thread 1/2-14NPT (adapter) 1/4”NPT F type internal thread 1/4-18NPT CG1 type G1" with flush diaphragm CG1/2 type G1/2" with flush diaphragm M30*2 with flush diaphragm Version with direct or remote diaphragm seal Diaphragm seal data -see chapter III
Open the catalog to page 12
PCE-28.SMART pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The communication standard for data interchange with the transmitter is the Hart protocol. Communication with the transmitter is carried out with: - some other Hart type communicators^*) - a PC using an HARt/USB converter and Raport 2 configuration software. (*) .eddl files available on www.aplisens.com....
Open the catalog to page 13All APLISENS S.A. catalogs and technical brochures
Archived catalogs
2019-2020 PRODUCT CATALOGUE176 Pages
Product catalog 2017166 Pages
2022-2023 PRODUCT CATALOGUE180 Pages
PRODUCT OVERVIEW6 Pages
PRODUCT CATALOGUE 2016/2017168 Pages
APLISENS CATALOGUE 2015/2016156 Pages
Level transmitters12 Pages
APC-2000ALW5 Pages
