PRESSURE * FLOW ♦ LEVEL * TEMPERATURE

Devices for measurement of pressure or level in open tanks Devices for measurement of differential pressure or level in pressure tanks Diaphragm seals Valves and fitting accessories Hydrostatic level probes, hydrostatic density Digital indicators Power supplies, isolators, signal converters, overvoltage protection Flow measurement Temperature transmitters Temperature sensors Electropneumatic positioner Hart communication tools

Devices for measurement of pressure or level in open tanks

SMART PRESSURE TRANSMITTER APC-2000ALW ü mA, 0…20 mA or 0…5 mA output signal + HART protocol 4…20 ü PROFIBUS PA signal Digital ü with backlight Display ü Programmable range, zero shift, characteristic and damping ratio with local panel keys ü SIL 2 certificate now ü safety certificate (ATEX, IECEx) Intrinsic yearsty 5 an ü Explosion proof certificate (ATEX, IECEx) warr ü certificate – DNV, BV Marine ü PED Conformity (97/23/EC) ü Accuracy 0,075% (0,05% on request) ü Gold plated diaphragm (Au) ü MID (Measuring Instruments Directive) – certificate acc. to 2004/22/WE directive and OIML R140:2007...

Application and construction Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminium alloy cast or 316SS stainles steel, degree of protection IP66/IP67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0–340° relative to the sensor, and a choice of cable direction....

Operating conditions Operating temperature range (ambient temp.) Accuracy depending on the set range -40...85°C Medium temperature range over 120°C – measurement with use an impulse line or diaphragm seals CAUTION: the medium must not be allowed to freeze in the impulse line or close to the process connection of the transmitter r for nominal measuring range 0 – error (0...100% FSO) r for range 0...10% FSO 1 – error r0 1=2×r Numerical error values are given in the technical data under metrological parameters SMART PRESSURE TRANSMITTER APC-2000ALW version with MID Application Metrological parameters...

SMART PRESSURE TRANSMITTER APC-2000AL with Profibus PA protocol Application and construction The transmitter electronic system performs the digital processing of measurement and generates the output signal with the communication module according to Profibus PA standard The transmitter function performance bases on profile 3.0 of Profibus PA standard. Full configuration of transmitter settings, adjustment of the display mode, transmitter zeroing and calibration in relation to pressure standards proceeds with the PDM (Process Device Manager) software, by Siemens. The EED program library, worked...

Casing, output signal Description Smart pressure transmitter Aluminum housing, IP66, with display, output 4-20mA + Hart Aluminum housing, IP66, with display, output, 0-20mA, 0-5mA + Hart Exia and Exd version not available Aluminum housing, IP66, with display, output Profibus PA Exd version not available Stainless steel housing, IP66, with display, output 4-20mA + Hart II 1/2G Ex ia IIC T4/T5 Ga/Gb IECEx Ex ia IIC T4/T5 Ga/Gb II 1/2G Ex ia IIB T5 Ga/Gb (for Profibus PA version) II 1/2G Ex ia IIC T4/T5 Ga/Gb II 1 D Ex ia IIIC T105°C Da I M1 Ex ia I Ma (only version with SS housing) Ex ia IIC T4/T5...

SMART PRESSURE TRANSMITTER APCE-2000 üm A output signal + HART protocol 4…20 üIntrinsic safety ATEX ü Gold plated diaphragm (Au) ü Accuracy 0.1% Application The APCE-2000 pressure transmitter is applicable to the measurement of the pressure, underpressure or absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. PZ version Version designed to work in hard conditions: Economical version: - housing 304ss - protection IP65 - electrical connection DIN...

Installation The transmitter is not heavy, so it can be installed directly on the installation without additional mounting bracket. When the pressure of steam or other hot media is measured, a siphon or impulse line should be used. The needle valve placed upstream the transmitter simplifies installation process and enables the zero point adjustment or the transmitter replacement. When the special process connections are required for the measurement of levels and pressures (e.g. at food and chemical industries), the transmitter is provided with an Aplisens diaphragm seal. Installing accessories...

Ordering procedure Model APCE-2000 Casing, output signal, electrical connection Versions, certificates more than one option is available Nominal measuring range Description Smart pressure transmitter Housing IP65 with DIN43650 connector, without display, output 4-20mA + Hart 304SS housing, IP66, without display, output 4-20mA + Hart packing gland M20x1,5 II 1/2G Ex ia IIC T4/T5/T6 Ga/Gb II 1D Ex ia IIIC T110°C Da I M1 Ex ia I Ma Exia for HS version available from Q4/2016 European Pressure Equipment Directive N° 97/23/EC, category IV Ultra stable version (only ranges no. 13÷16) For oxygen service...

SMART PRESSURE TRANSMITTER PCE-28.SMART ü mA output signal + HART protocol 4…20 ü safety certificate (ATEX, IECEx) Intrinsic ü Accuracy 0.1% ü certificate – DNV, BV Marine 1/2’’NPT male + internal thread G1/4’’ 1/4”NPT F type internal thread 1/4-18NPT G1" with flush diaphragm M30×2 with flush diaphragm Version with direct or re

Application PCE-28.SMART pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. Communication The communication standard for data interchange with the transmitter is the Hart protocol. Communication with the transmitter is carried out with: – a KAP-03, KAP-03Ex communicator – some other Hart type communicators,(*) – a PC using an HART/USB/Bluetooth converter...