Product catalog 2017
166Pages

SMART PRESSURE TRANSMITTER APC-2000ALWUAOT • communication protocol ✓ 4...20 itiA, 0...20 mA or 0...5 mA output signal + HART protocol S Display with backlight S Programmable range, zero shift, characteristic and damping ratio with local panel keys S SIL 2 certificate S Intrinsic safety certificate (ATEX, lECEx) ■S Explosion proof certificate (ATEX, lECEx) ■S Marine certificate - DNV, BV ✓ PED Conformity (97/23/EC) S Accuracy 0,075% (0,05% on request) S Gold plated diaphragm (Au) ■S MID (Measuring Instruments Directive) - certificate acc. to 2004/22/WE directive and OIML R140:2007...

-^plisenS* — Application and construction Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminium alloy cast or 316SS stainles steel, degree of protection IP66/IP67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0-340° relative to the sensor, and a...

Accuracy depending on the set range Operating conditions Operating temperature range (ambient temp.) -40...85°C Medium temperature range -40...120°C over 120°C - measurement with use an impulse line or diaphragm seals CAUTION: the medium must not be allowed to freeze in the impulse line or close to the process connection of the transmitter p0 - error for nominal measuring range (0...100% FSO) Pi - error for range 0...10% FSO Pi = 2 x p0 Numerical error values are given in the technical data under metrological parameters SMART PRESSURE TRANSMITTER APC-2000ALW version with MID...

Smart pressure transmitter Casing, output signal Versions, certificates* * more than one option is available Nominal measuring range Process connections Process connections: M, G1/2”, P, GP and %”NPTM available with NACE MR-01-75 certificate /code of diaphragm seal.. ^plisenS Description Aluminum housing, IP66, with display, output 4-20mA + Hart Aluminum housing, IP66, with display, output, 0-20mA, 0-5mA + Hart Exia and Exd version not available Stainless steel housing, IP66, with display, output 4-20mA + Hart © II 1/2G Ex ia IIC T4/T5 Ga/Gb lECEx Ex ia IIC T4/T5 Ga/Gb II 1/2G Ex ia IIC...

SMART PRESSURE TRANSMITTER APCE-2000 S 4...20 m A output signal + HART protocol ■/ Rangeability 100:1 S ATEX Intrinsic safety ■/ Gold plated diaphragm (Au) S Accuracy 0.1% Application The APCE-2000 pressure transmitter is applicable to the measurement of the pressure, underpressure or absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. PD version Economical version: - housing 304ss - protection IP65 - electrical connection DIN 43650 -...

-^plisenS8^ Installation The transmitter is not heavy, so it can be installed directly on the installation without additional mounting bracket. When the pressure of steam or other hot media is measured, a siphon or impulse line should be used. The needle valve placed upstream the transmitter simplifies installation process and enables the zero point adjustment or the transmitter replacement. When the special process connections are required for the measurement of levels and pressures (e.g. at food and chemical industries), the transmitter is provided with an Aplisens diaphragm seal....

Ordering procedure Model Example : Pressure transmitter, output 4..20mA + HART, version Exia, nominal measuring range 0..7bar, calibrated range 0..6bar, process connection M20x1,5, electrical connection DIN43650 connector. APCE-2000PD/Exia/0..7bar/0..6bar/M

^plisenS* SMART PRESSURE TRANSMITTER ^ PCE-28.SMART \y V COMMUNICATION PROTOCOL S 4...20 mA output signal + HART protocol S Intrinsic safety certificate (ATEX, lECEx) S Accuracy 0.1% G1/2 type G1/2", 03 hole M type M20x1.5, 03 hole 1/2”NPT type 1/2”NPT male + internal thread G1/4’ Version with direct or remote diaphragm seal Diaphragm seal data -see chapter III

— ^plisenV Application PCE-28.SMART pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The communication standard for data interchange with the transmitter is the Hart protocol. Communication with the transmitter is carried out with: - a KAP-03, KAP-03Ex communicator - some other Hart type communicators,(*) - a PC using an HART/USB/Bluetooth...

Ordering procedure Example : Pressure transmitter, output 4..20mA + HART, version Exia, nominal measuring range 0..7bar, calibrated range 0..6bar, process connection 14”NPT male, electrical connection DIN43650 connector. PCE-28.SMART/Exia/0..7bar/0..6bar/PD/1/2”NPTM

PKj£L iwokiikI Any range from 0...25 mbar up to 0...1000 bar 4 t 20 mA two-wire or 0 + 10 V output Intrinsic safety certificate (ATEX, lECEx) Low-voltage version with ATEX and lECEx certificate (model PC-29A, PC-29B) S Marine certificate - DNV, BV S Communication protocol Modbus RTU S Gold plated diaphragm S SIL 1 certificate S Version with local display ^ ■y i 1/2”NPT type 1/2”NPT male + internal thread G1/4’ RG type G1/2"with radiator RM type M20*1.5 with radiator CGI type G1 "with flush Diaphragm CM30x2 type M30*2 with flush Diaphragm CGI/2 type G1/2 "with flush diaphragm 1/2”NPT F type...

-^plisenS — ALW type Aluminum casing with programable local display. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0-345° relative to the sensor. Electrical connection DIN43650, IP65 (special verison with cable electrical connection and IP67). Display with backlight allows to read: - measured pressure in user units or % of measuring range - current in output loop in mA Application and construction The PCE-28 pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases,...