ROD BRACKETS

ROD BRACKETS

Product catalog summary
Rod Brackets Overview
Rod brackets are primarily utilized in scenarios where saddle installation on roofs is not feasible. They are designed to be used with couplings (refer to tables 20 or 21) and taper pointed air rods (refer to table 5).
Specifications
  • AT-104B: Dimensions are 120 x 24 x 60 mm, with a rod diameter of 16 mm, made from gunmetal, and weighing 900 g.
  • AT-105B: Dimensions are 120 x 24 x 60 mm, with a rod diameter of 16 mm, made from aluminium, and weighing 280 g.
Compliance
These products comply with the following standards: IEC 62305, IEC 62561, BS EN 1982, and BS 2897.
Applications
Applicable for models AT-100B and AT-104B.
Materials
  • AT-104B is made from gunmetal (Gu).
  • AT-105B is made from aluminium (Al).
See more

Catalog excerpts

ROD BRACKETS-1

>INTERCEPTION SYSTEMS AND ACCESSORIES > FIXINGS These brackets are mainly used where it is not possible to fit a saddle on the roof. Used in conjunction with couplings (tables 20 or 21) and taper pointed air rods (table 5). Reference Aplicaciones Tecnologicas S.A. - Parque Tecnologico de Valencia - Nicolas Copernico, 4 - 46980 Paterna (Valencia), Spain T +34 961 318 250 - F +34 961 318 206 - [email protected] - www.at3w.com

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.