PCR With FinSep® The PCR is a compact multi-section all-aluminum heat exchanger featuring a brazed bar and plate design. The PCR pre-cools the incoming air using the cold air exiting the refrigerant section. It then cools the air in the refrigerant section before the air stream enters a separation chamber to allow the condensed moisture to fall out. Since the air is reheated in the regeneration section, the final humidity remains below 25%.  Model Dimensions are in mm. Air connections are BSP or NPT. Refrigerant connections are rotalocks. Mesh, Nominal Capacity, SCFM Mesh Nominal Capacity, LPS Mesh Delta P @ Nominal Flow, PSID Mesh Delta P @ Nominal Flow, mBar FinSep Nominal Capacity, SCFM FinSep Nominal Capacity, LPS FinSep Delta P @ Nominal Flow, PSID FinSep Delta P @ Nominal Flow, mBar n irect replacement for the original API D PCR Mesh Delta P @ Mesh Nominal Nominal Mesh Delta P Flow, @ Nominal Capacity, Capacity, PSID Flow, mBar SCFM LPS Part Number 619-2001M-BSP 76 35.9 3.0 206.8 619-2002M-BSP 146 68.9 3.2 220.6 282 133.1 4.7 324.0 619-2003M-BSP 388 183.1 4.6 317.2 619-2004M-BSP 529 249.6 5.5 379.2 619-2005M-BSP 626 295.4 7.0 482.6 619-2006M-BSP Nominal capacities are based on ISO-7183 conditions for a 3° C PDP. Mesh n Improved efficiency Nominal n Model flow capacity Higher n oolant side design pressure: 19.3 barG C @ 65°C (280 psig @ 149°F) Nominal capacities are based on ISO-7183 conditions for a 3°C PDP. GLOBAL HEADQUARTERS 2777 Walden Avenue | Buffalo, NY 14225, USA | +1.716.684.6700 | [email protected] apiheattransfer.com n etter moisture separation B2 3 4 5 n ir side design pressure: 14 barG