Catalogs >
API Schmidt-Bretten, API Heat Transfer group >
AOL Series

AOL Series
1 / 4Pages

Catalog excerpts

FLUID COOLING | P-Bar Series Industrial AOL BRAZED ALUMiNUM CONSTRUCTiON HYDRAULiC OR COMPRESSOR OiL COOLiNG Features Large Oil Flow High performance industrial duty brazed aluminum bar and plate Core Compact all aluminum core assembly Ideal for converting water cooled equipment to air cooled Eliminates high water and sewer costs Eliminates corrosion problems associated with water cooled units Vertical air flow works well for heat recovery State-of-the-art heat transfer technology Hydraulic motors available Optional SAE Ports Marine corrosion control coatings available High performance air side fin design Detachable legs maximum Operating pressure Legs Steel with baked enamel finish Petroleum/mineral oils 250 psi (17 BAR) Shroud Steel Oil/water emulsion M®x ""TO Ce rating Temperature standard Core Brazed Aluminum Bar and Plate Water/ethylene glycol 300 F (150 C) ■ Tanks - 5052 Aluminum ■ Nose Bar & Little Bar - 3003-H Aluminum ■ Air Fin, Plate, Turbulator & End Plate -3003-O Aluminum Fan Aluminum Hub, Plastic Blades Motor TEFC Model Model Size Selected Specify Motor Required 0 - No Motor 2 - Single Phase 3 - Three Phase 6 - 575 Volt 9 - Hydraulic 18 - IEC Three Phase Noise Level Blank - Standard Noise Level LN - Low Noise Level

Open the catalog to page 1

Note: We reserve the right to make reasonable design changes without notice. Ail dimensions are in inches and (millimeters). Selection Procedure Performance Curves based on 100°F (55.56°C) E.T.D. or Entering Temperature Difference (E.T.D = Entering oil temperature minus ambient air temperature). SAE #10 oil @ 200°F (93.33°C). Oil pressure drop coding: X = 5 PSI (.345 BAR) • = 10 PSI (.689 BAR) ♦ = 15 PSI (1.03 BAR) ▲ = 20 PSI (1.38 BAR) ■ = 30 PSI (2.10 BAR) E.T.D. temperature correction formula: ENGLiSH Version 100 HP Curve = HP To Be Removed X Desired E.T.D METRiC Version KW Heatload...

Open the catalog to page 2

Specifications Electric Motor & Fan Data Model Fan Motor Full Load CFM H.P. Voltage Phase Amps 230V Frequency Nema Thermal Sound (Hz) RPM Frame Overload dB(A) at 3 ft. Published electrical ratings are approximate, and may vary because of motor brand. Actual ratings are on motor nameplate. May also be operated at 50 hz. Consult factory for details. 50 Hz voltage: 190-200-208-220/380-400-415-440 (4) 50 Hz voltage: 190-208/380-415 All motors shown are TEFC—Other motor options available upon request. (1) Electric Motor Information (50 Hz IEC Frame) S dB(A) ound Voltage Phase All IEC frame...

Open the catalog to page 3

Note: Derate heat rejection values 15% if using 50Hz motors. Heat Rejection (KW/°C) Horsepower Removed in Cooler @ 100°F ETD Heat Rejection (KW/°C) Horsepower Removed in Cooler @ 100°F ETD Available in 60 Hz Nema Frame only.

Open the catalog to page 4