SMART LUBRICATION SYSTEM
16Pages

APEX DYNAMICS, INC SMART LUBRICATION SYSTEM

Smart Lubrication System Lubrication System Main Features CE & ATEX Certification Support up to 40 Lubrication Positions Lubrication Frequency Adjustable Hand-Set and PLC Control Mode Memory Function Fill Level Monitoring and Electrical Self-Protection Smart Lubrication System

©2018 by APEX DYNAMICS, INC. APEX DYNAMICS, INC. reserves modification and copyrights of all technical specifications, illustrations and drawings in this catalog in allowance for continuous products development and advancement. For the newest data and information, please visit http://www.apexdyna.com/

Smart Lubrication System ( I ) Connector Dimension M 10. ( 2 ) Requiring use of a Distributor. ( 3 ) Hand-Set is not included in lubricator and is to order separately.

Smart Lubrication System APEX DYNAMICS, INC. ( I ) Connector Dimension M 10. ( 2 ) Requiring use of a Distributor. ( 3 ) Hand-Set is not included in lubricator and is to order separately.

Smart Lubrication System ■ 24V DC is applied to the Lubricator. Any electrical interference during power connection should be avoided. The connection between lubricator and controller via 5-Pin Socket. PIN I : Output Signal PIN 2 : Input Signal PIN 3 : FGND PIN 4 : Input 24V DC PIN 5 : GND ■ Hand-Set Controller (Order Code : ECO I) After set-up of lubricator, the Hand-Set Controller can be removed. Please also refer to Manual of Installation.

Smart Lubrication System Left-Hand Helical TeethRight-Hand HelicalTeeth Module No. (I) No. of Teeth (2) Tip Diameter (3) Pitch Diameter (4) Central Distance between PU Pinion and Pinion (d = Pinion Pitch Diameter) (5) Central Distance between PU Pinion and Rack Bottom (h0 = Height between Rack's pitch line to bottom)

Smart Lubrication System ■ Distributor supports up to 4 lubrication positions. Remark for operation: The distance between Distributor and Lubricator outlet should be kept as short as possible. Install only one distributor at outlet, do not connect distributors in series. The pressure difference between all lubrication outlets should not exceed 8 bar. To use PA tube with same cross-section and similar length. According to required diameter, choose connector. (E.g.: SPLS-8 series is to select for Pipe diameter 8 mm.) Supporting standard grease NLGI 2. Temperature range : +10°C - +60°C...

(I) Material:Carbon Steel (Nickel-Plating) Operation Pressure : max. 80 bar OperationTemperature :-30°C ~ + 100°C

Smart Lubrication System Material :Carbon Steel (Nickel-Plating) Operation Pressure : max.80 bar Operation Temperature :-30°C - +100°C

Tube Connector Right-Angle Non-Return Valve 00 B 0DI Tube Function of Non-Return Valve: Avoid of backflow, Resistance of pressure. The oil filling connector is to apply for refilling of lubricant. High kinematic viscosity of lubricant will reduce the pumping distance to the device or facility. Pay attention to kinematic viscosity by refilling of Non-APEX lubricant.

Smart Lubrication System I Empty Cartridge (Order Code : GOO) For Self-Filling of grease. Oil Filling Connector is necessary. Supports LUG-400 lubricator I Standard Grease (Order Code : GO I) NLGI Grade 2 Temperature Range -30°C ~ +140°C. Containing PTFE.good performance in high pressure and metal adhesion. Suitable for high loading gear transmission system. Suitable for high temperature environment. KinematicViscosity 32 cSt / 40°C Supports LUG lubricator pre-fill at 400 cm3 ■ Food Grade Grease (Order Code : G02) NLGI Grade 2 Temperature Range -35°C ~ +120°C. NFS H I license. Provide good...

PA 12Tube is pre-filled with grease. Operating Pressure:25 kg/cm2 by 4 mm PATube; 28 kg/cm2 by 6 mm &8 mm PATube (Temperature 20°C) OperatingTemperature : -40°C~+80°C

APEX TAIWAN NORTH ANDTEKAUTOMATION CO.,LTD TEL +866-02-62282865 13F-S, No.2, Jlar 8th R<J., Jhongho Dlst., New Talpal City 235, TAI WAN sales Eland tek.com.tw APEX TAIWAN CENTRAL ANDTEKAUTOMATION C0..LTD TEL +886-04-23594286 9F-6, No.925, Soc.4, Taiwan Blvd., Xltun Diet. Taichung City 407TAIWAN salesfltandteR.com.tw www.aPBxdvna.com APEX TAIWAN SOUTH MEN 4ENN ELECTRIC CO., LTD. TEL +888-08-2337332 - 6 No.774, zhonghua Rd,, Yongkang Dist., Tainan City 710, TAIWAN menlennginis24.Mnet.not APEX DYNAMICS INC. SHANGHAI TEL +86-21-68220577 No.i 28 ZHUYING Read QINGPU Industry Area, Shanghai, CHINA...