Linear Drive System For Laser Cutting Industry

Product catalog summary

Overview: This document provides technical specifications and guidelines for the APEX DYNAMICS, INC. Linear Drive System, specifically designed for the laser cutting industry. It includes detailed information on the system's components, performance parameters, and operational recommendations.

Specifications:

Teeth Number: 33T / 37T
Ratio: R5 / R7
Motor Shaft: 22 / 24
Backlash: Measured at 2% of Nominal Output Torque T 2N
Continuous Operation: Not recommended
Operating Temperature: -10º C to 90º C
Lubrication: Synthetic Lubrication Grease
Efficiency: ≥ 97%

Performance Parameters:

Nominal Input Speed: 3,600 rpm
Max Input Speed: 6,000 rpm
Max Drive Force: 20,000 N
Running Noise: ≤ 59 dB(A)

Installation and Maintenance:

Mounting Position: All Directions
Service Life: Specified in hours based on operational conditions
Gap Between Rack and Pinion: Max 0.082 mm, Min 0.038 mm

Quality and Material:

Tooth Quality: DIN4 / Alloy Steel
Tooth Thickness Tolerance: e24
Material: Carbon Steel for Quality 6, Alloy Steel for DIN4

Recommendations:

Ensure proper alignment and installation to minimize pitch errors.
Regularly check lubrication levels and operating temperatures to maintain efficiency.
Avoid continuous operation to prevent excessive wear and tear.

Catalog excerpts

Linear Drive System For Laser Cutting Industry-1

Linear Drive System For Laser Cutting Industry Performance Order Code (1) Ratio ( i = Nin / Noul ) (2) Backlash is measured at 2% of Nominal Output Torque T2N (3) Continuous operation is not recommended (4) These values are measured by gearbox with ratio 7 at 3,000 rpm without loading (5) Motor adapter specification please refer to the dimension of linear drive system No.10, Keyuan 3rd Rd., Xitun Dist., Taichung City 407, Taiwan (R.O.C.) Tel:886-4-24650219 | Fax:886-4-24650118

Open the catalog to page 1

Linear Drive System For Laser Cutting Industry-2

Quality DIN4 / Alloy Steel Tooth Thickness Tolerance :e24 Left-Hand Helical Teeth Case-Hardened and Teeth Ground

Open the catalog to page 2

All Apex Dynamics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list