HIGH TORQUE HIGH PRECISION PLANETARY GEARBOX AP/APK APC / APCK - SERIES

Gearbox Series - AP / APK / APC / APCK Gearbox Series - AP / APK / APC / APCK Features: High Torque Optimized Output Torque & Inertia Moment High Precision Long Service Life Low Noise Limited Temperature Rise Support Flange/Curvic Interface Suitable for Rack & Pinion Applications Gearbox Series - AP / APK / APC / APCK

Motor Type Ratio Gearbox Size Motor Type : Manufacturer and Model (1) Ratio ( i= N in / Nout ) . ©2019 by APEX DYNAMICS, INC. APEX DYNAMICS, INC. reserves modification and copyrights of all technical specifications, illustrations and drawings in this catalog in allowance for continuous products development and advancement. For the newest data and information, please visit http://www.apexdyna.com/

Gearbox Series - AP / APK / APC / APCK (1) Ratio ( i = Nn / NoUt ) . (2) The dB values are measured by gearbox with ratio 5.5 (1-stage), 55 (2-stage) or ratio 220 (3-stage), no loading at 3,000 RPM or at the respective Nominal Input Speed by bigger model size. By lower ratio and/or higher RPM, the noise level could be 3 to 5 dB higher. (3) Backlash is measured at 2% of Nominal Output Torque T2N. (4) Applied to the output flange/curvic center at 100 rpm. The calculation formula please refer to Fig. 1. (5) Continuous operation is not recommended. Note : Applied to the output flange center at 100...

(A) 0 = Input shaft diameter.

Gearbox Series - AP / APK / APC / APCK Gearbox Series - AP / APK / APC / APCK (1) Dimensions are related to motor interface. Please contact APEX for details.

(1) Dimensions are related to motor interface. Please contact APEX for details.

Gearbox Series - AP / APK / APC / APCK (2) The dB values are measured by gearbox with ratio 55 (2-stage), 385 (3-stage) or ratio 5,500 (4-stage), no loading at 3,000 RPM or at the respective Nominal Input Speed by bigger model size. By lower ratio and/or higher RPM, the noise level could be 3 to 5 dB higher. (3) Backlash is measured at 2% of Nominal Output Torque T2N. (4) Applied to the output flange/curvic center at 100 rpm. The calculation formula please refer to page (3) (5) Continuous operation is not recommended.

(A) 0 = Input shaft diameter.

Gearbox Series - AP / APK / APC / APCK (1) Dimensions are related to motor interface. Please contact APEX for details. (2) Flange Interface, please refer to page (5).

(1) Dimensions are related to motor interface. Please contact APEX for details. (2) Flange Interface, please refer to page (5).

Gearbox Series - AP / APK / APC / APCK (1) Dimensions are related to motor interface. Please contact APEX for details. (2) Flange Interface, please refer to page (5).

(1) Dimensions are related to motor interface. Please contact APEX for details.

Gearbox Series - AP / APK / APC / APCK (1) Dimensions are related to motor interface. Please contact APEX for details.

(1) Dimensions are related to motor interface. Please contact APEX for details.

Gearbox Series - AP / APK / APC / APCK (A) 0 = Input shaft diameter.

(1) Dimensions are related to motor interface. Please contact APEX for details. (2) Flange Interface, please refer to page (5).

Gearbox Series - AP / APK / APC / APCK (1) Dimensions are related to motor interface. Please contact APEX for details.

Quality DIN4 / Alloy Steel Tooth Thickness Tolerance : e24 Left - Hand Helical Helical Angle p = 19° 31,42"(19.5283°) Pressure Angle a = 20° Case - Hardened and Teeth Ground (1) Number of teeth (2) Working pitch circle diameter (3) Maximal Feed-Force (4) Maximal Driving Torque (5) Calculated under the basis of speed 1.5 m/s • In Table 1, the max. permissible torque of the curvic plate pinion and the rack is calculated under the basis of speed 3 m/s. This condition is under providing good lubrication (using the automatic lubrication system or applied grease manually every day), the tooth root...

Gearbox Series - AP / APK / APC / APCK Quality 5 / Alloy Steel Tooth Thickness Tolerance : -15 ~ 0 pm Right - Hand Helical Helical Angle p = 19° 3i,42n(19.52830) Pressure Angle a = 20° Material Carburized, Induction Hardened Teeth Ground and all Sides Ground (i) Teeth Pitch Pt = Module x n / cos B (2) fp = Single Pitch Error (3) Fp = Total Pitch Error

Selection Start \ Continuous Operation (Eq.1) Calculate Ratio i (Eq.2) Calculate Ratio i (Eq.2) Select a Larger Gearbox Calculate the Mean Output Calculate the Mean Output Torque T2m (Eq-3) Torque T2m (Eq-3) -1 Calculate the Max. Acceleration Torque T (Eq.4) 12max ' ' NO Select a Larger *■ Gearbox tjtc■% 1-ED= \c * x100%,twork = tftc+td Siycle Index: a. Acceleration, c. Constant, d. Deceleration, p. Pause (Eq.1) -► YES I Calculate the Mean Output Speed n2m and the YES Nominal Output Speed n2N of Gearbox(Eq.5) I nwork nm Output Speed of the Motor nwork Working Speed (Eq-2) Select a Smaller Ratio...

Gearbox Series - AP / APK / APC / APCK * This value is measured at environment temperature 25°C and the input speed 3,000 rpm. If the Nominal Input Speed n 1N of gearbox is lower than 3,000 rpm, this value is measured by that specific Nominal Input Speed.

APEX TAIWAN NORTH ANDTEK AUTOMATION CO.,LTD TEL +886-02-82262655 13F-5, No.2, Jian 8th Rd., Jhonghe Dist., New APEX TAIWAN CENTRAL ANDTEK AUTOMATION CO.,LTD TEL +886-04-23594286 9F-6, No.925, Sec.4, Taiwan Blvd., Xitun Dist. Taichung City 407 TAIWAN [email protected] www.apgxdyna.com APEX TAIWAN SOUTH MEN JENN ELECTRIC CO., LTD. TEL+886-06-2337332~ 6 No.774, Zhonghua Rd., Yongkang Dist.,Tainan City 710, TAIWAN [email protected] APEX DYNAMICS INC. SHANGHAI TEL+86-21-69220577 No.128 ZHUYING Road QINGPU Industry Area, Shanghai, CHINA [email protected] www.apexdvna.cn APEX DYNAMICS SHENZHEN,...