NEW GENERATION PLANETARY GEARBOX

Gearbox Series -AH/AHK D Features: High Torque High efficiency Long-Term persistence of reduced backlash Low noise Long service life Limited temperature rise Optimized output torque Optimized Inertia moment Flexible mounting diameters

Ordering Code - AH / AHK Gearbox Motor Type Ratio Gearbox Size MotorType Manufacturer and Model (2) Please refer to the specifications for the ratios provided in each series. (3) Please refer to page 06. ©2019 by APEX DYNAMICS, INC. APEX DYNAMICS, INC. reserves modification and copyrights of all technical specifications, illustrations and drawings in this catalog in allowance for continuous products development and advancement. For the newest data and information, please visit http://www.apexdvna.com/

(1) Ratio ( i = Nin / Nout ) . (2) Backlash is measured at 2% of Nominal Output Torque T2N . (3) The dB values are measured by gearbox with ratio 10 (1-stage) or ratio 100 (2-stage), no loading at 3,000 RPM or at the respective Nominal Input Speed by bigger model size. By lower ratio and/or higher RPM, the noise level could be 3 to 5 dB higher. (4) Applied to the output flange center at 100 rpm. (5) Continuous operation is not recommended.

Note : Applied to the output flange center at 100 rpm

Note: Dimensions are related to motor interface. Please contact APEX for details.

(A) 0 = Input shaft diameter.

(I) Dimensions are related to motor interface. Please contact APEX for details. (2) Refer to the AH series(Page 05) for flange interface.

(A) 0 = Input shaft diameter.

(I) Dimensions are related to motor interface. Please contact APEX for details. (2) Refer to the AH series(Page 05) for flange interface.

(A) 0 = Input shaft diameter.

(I) Dimensions are related to motor interface. Please contact APEX for details. (2) Refer to the AH series(Page 05) for flange interface.

(A) 0 = Input shaft diameter.

(I) Dimensions are related to motor interface. Please contact APEX for details. (2) Refer to the AH series(Page 05) for flange interface.

(A) 0 = Input shaft diameter.

(I) Dimensions are related to motor interface. Please contact APEX for details. (2) Refer to the AH series(Page 05) for flange interface.

Selection Start Select a Larger Gearbox Calculate Ratio i (Eq.2) I Calculate the Mean Output Torque T2m (^4-3) -1 Calculate the Max. Acceleration Torque T (Eq.4) 12max ' ' Calculate Ratio i (Eq.2) 1 Calculate the Mean Output Torque T2m (Eq-3) Select a Larger Gearbox 1.ED= * J * x100%,twork = ta+tc + td Siycle Index : a. Acceleration, c. Constant, d. Deceleration, p. Pause (Eq.1) i -► YES I Calculate the Mean Output Speed n2m and the YES Nominal Output Speed n2N of Gearbox(Eq.5) I Select a Smaller Ratio hq i in Larger Motor If -«- n2m^n2N nwork nm Output Speed of the Motor nwork Working Speed...

* This value is measured at environment temperature 25°C and the input speed 3,000 rpm. If the Nominal Input Speed n1N of gearbox is lower than 3,000 rpm, this value is measured by that specific Nominal Input Speed.

APEX TAIWAN NORTH ANDTEK AUTOMATION CO.,LTD TEL +886-02-82262655 13F-5, No.2, Jian 8th Rd., Jhonghe Dist., New APEX TAIWAN CENTRAL ANDTEK AUTOMATION CO.,LTD TEL +886-04-23594286 9F-6, No.925, Sec.4, Taiwan Blvd., Xitun Dist. Taichung City 407 TAIWAN [email protected] www.apgxdyna.com APEX TAIWAN SOUTH MEN JENN ELECTRIC CO., LTD. TEL+886-06-2337332~ 6 No.774, Zhonghua Rd., Yongkang Dist.,Tainan City 710, TAIWAN [email protected] APEX DYNAMICS INC. SHANGHAI TEL+86-21-69220577 No.128 ZHUYING Road QINGPU Industry Area, Shanghai, CHINA [email protected] www.apexdvna.cn APEX DYNAMICS SHENZHEN,...