High precision planetary gearbox AFX / AFXR series High Torque High Precision Long Service Life Low Noise Limited Temperature Rise More Suitable for Continuous Operation

Ordering Code - AFX / AFXR Series AFX075 MOTOR Motor Type Shaft Type Gearbox Size Shaft Type : S1 = Smooth Output Shaft S2 = Output Shaft with Key S3 = DIN 5480 Backlash : P0 = Micro Backlash P1 = Reduced Backlash P2 = Standard Backlash Motor Type : Manufacturer and Model (1) Ratio ( I = N in / N out ) . (2) Please refer to the specifications for the ratios provided in each series. ©2018 by APEX DYNAMICS, INC. APEX DYNAMICS, INC. reserves modification and copyrights of all technical specifications, illustrations and drawings in this catalog in allowance for continuous products development and advancement....

High precision planetary gearbox AFX / AFXR series A. Ratio ( i=Nin / Nout ) B. Max. acceleration torque T2B = 60% of T2NOT C. Applied to the output shaft center at 100 rpm D. For continuous operation, the service life time is reduced E. These values are measured by gearbox with ratio = 10 (1-stage) or ratio = 100 (2-stage) at 3,000 rpm no loading. by lower ratio and / or higher RPM, the noise level could be 3 to 5 dB Higher. F. Continuous operation is not supported.

Gearbox Inertia Model No. Mass Moments of Inertia J1

High precision planetary gearbox AFX / AFXR series Dimensions (1-stage, Ratio i=3~10) / AFX Series C9 L2 Shaft Option S3 [unit: mm] 1. C1~C10 are motor specific dimensions (metric std shown). Refer to www.apexdyna.com and Design Tool to view your specific motor mounting system. 2. AFX042 ratio 5, 10 offers C3 ≤ 12 option. AFX060 r

Dimensions (2-stage, Ratio i=12~100) / AFX Series C9 3. C1~C10 are motor specific dimensions (metric std shown). Refer to www.apexdyna.com and Design Too

High precision planetary gearbox AFX / AFXR series Specications / AFXR Series Gearbox Performance Stages Nominal Output Torque T2N Emergency Stop Torque T2NOTB Nominal Input Speed n1N Max. Input Speed n 1B Max. Radial Load F2rB Max. Axial Load F2aBC Operating Temperature Lubrication Degree of Gearbox Protection Mounting Position Noise (n=3000rpm, i=10, No load)E 1 A. Ratio ( i=Nin / Nout ) B. Max. acceleration torque T2B = 60% of T2NOT C. Applied to the output shaft center at 100 rpm D. For continuous operation, the service life time is reduced E. These values are measured by gearbox with ratio...

1 Mass Moments of Inertia J1

High precision planetary gearbox AFX / AFXR series / AFXR Series Shaft Option S3 [unit: mm] 1. C1~C10 are motor specific dimensions (metric std shown). Refer to www.apexdyna.com and Design Tool to view your spec

/ AFXR Series Shaft Option S3 [unit: mm] 2. C1~C10 are motor specific dimensions (metric std shown). Refer to www.apexdyna.com and Design Tool to

High precision planetary gearbox AFX / AFXR series Output Torque Selection of the Optimum Gearbox Calculate the Mean Output Torque T2m (Eq.3) Calculate the Mean Output Torque T2m (Eq.3) Loads on Output Shaft Output Speed Selection Start Calculate the max. Acceleration Torque T2max (Eq.4) Select a Larger Gearbox

Permitted Radial and Axial Loads The permitted radial and axial loads on output shaft of the gearbox depend on the design of the gearbox supporting bearings. APEX use the extension straddle oversized ball bearing design. It can take heavy load from both axes. If radial force F2r is exerted Permitted Radial Load F 2rB [ N ] On Center Position of Shaft on the center of the output shaft X=1/2 x L. Under various operating The permitted radial load is given on left diagram. Position Load Factor kb axial loads can be calculated by the position load factor Kbon the left diagram. Position X [ mm ] S1...

APEX DYNAMICSKOREA INC TEL +82-31-8179992 7-5, Aenigol-gil, Ilsandong-gu, Goyang-si, Gyeonggi-do, Republic of Korea 10301 [email protected] www.apexdynakorea.co.kr 87 Soi Ladkrabang 30, Ladkrabang, Ladkrabang, Bangkok 10520, Thailand [email protected] www.apexdyna.co. th LIMAN TRADING LIMITED FZC LLC P.O. Box 97 , Postal Code 322, Corporate Parks, Sohar Free Zoon, Oman APEX DYNAMICS JAPAN TEL +88-092-4511202 1-3-46, Hanmichibasi, Hakata-ku, Fukuoka, 812-0897, JAPAN [email protected] www.apexdyna.jp Ul. Krakowska 50, 32-083 Balice, Poland [email protected] APEX DYNAMICS (I) JV TEL...