video corpo cad

10D+10DWY
15Pages

{{requestButtons}}

Catalog excerpts

10D+10DWY - 1

Round cap • ergonomic feel • panel sealed Panel sealed to IP67 with the 10DWY Available with illumination Can be used with the Contolmec solution (same below panel Slightly concave round cap Copyright MEC ApS Copyright MEC ApS This tecnical document is the document is the This tecnical 0.82 [0.032] 0.82 [0.032] property of MEC ApS, Denmark,[0.400] property of MEC ApS, Denmark, 10.16 10.16 [0.400] 1 and shall not be and shallany other used for not be used for any other www.apem.com www.apem.com 7.62 [0.300] 7.62 [0.300] purposethe facilitating the e-mail: danmec@mec.dk e-mail: danmec@mec.dk purpose than facilitating than 5/3/2021 ABA 5/3/2021 installation and use of our products. of our products. installation and 24.20 [0.953] use Revision Revision ABA Dwg. Dwg. MH MH ApprovedApproved5/7/2021 5G+10D+10DWY Edited Edited DIMENSIONS in mm. mm. Scale DIMENSIONS in 1:1 Scale Unless otherwise specified Unless otherwise specified This tecnical document tecnical document is the This is the property of MEC ApS, Denmark, ApS, Denmark, property of MEC 25.67 [1.011] 1 and shall not be used for any other used for any other www.apem.com www.apem.com and shall not be 0.82 danmec@mec.dk e-mail: danmec@mec.dk[0.032] purpose than facilitating thethan facilitating the e-mail: purpose installation 5/4/2021 and use of our products. of our products. installation and use It may not be copied, reproduced, 7.62 [0.300] It may not be copied, reproduced, transmitted or communicated to a transmitted or communicated to a 5/7/2021 third party without third party withoutof prior consent of the prior consent the MEC ApS MEC ApS 24.20 [0.953] PARTNUMBER PARTNUMBER 16.00 [0.630] 16.00 [0.630] DIMENSIONS in mm. *with 0.1 mm pretension on the cap Copyright MEC Unless otherwise specified all tolerances are +/- 0,214.00 [0.551] 14.00 [0.551] mm 18.00 [0.709] The company reserves the right to change specifications without notice. All tolerance if not otherwise specified ±0.2mm. 7.62 [0.300] 7.62 [0.300] 16.00 [0.630] Revision Revision 16.00 [0.630] ABA ABA Dwg. Dwg. 5/4/2021 MH 5/7/2021 MH Approved Approved Edited Edited Scale Scale 1:1 1 third party without theparty without the prior consent of third prior consent of MULTIMEC-SYSTEM MEC ApS MEC ApS PARTNUMBER PARTNUMBER It may not be copied, reproduced, It may not be copied, reproduced, transmitted or communicated to a transmitted or communicated to a 5/7/2021 DIMENSIONS inDIMENSIONS in mm. mm. Unless otherwise specified Unless otherwise specified all tolerances are +/- 0,2 mm are +/- 0,2 mm all tolerances SWITCH SPECIFICATIONS : see Multimec™ 5 series. This tecnical do property of MEC and shall not be 1 purpose than

Open the catalog to page 1
10D+10DWY - 2

Round caps • ergonomic feel • panel sealed MOUNTING MATERIALS • ap : C - solid color : ABS UL94HB - illuminated : polycarbonate UL94HB • anel cut-out : Ø16.4 mm P • witch spacing AxB : S sealed 27x27 mm non-sealed 19x19 mm • Sealing : silicone • ecommended panel thicknes : 2 mm R • Design recommendation : 0.1 mm pretension on the cap • ealing : 1 million cycles S 2,50 For the assembly operation of the 10D cap and the 10DWY sealing we recommend using a mounting tool. MOUNTING TOOL Part Number 98611020 DIMENSIONS in mm. Unless otherwise specified DIMENSIONS in mm. all tolerances are +/- 0,2...

Open the catalog to page 2
10D+10DWY - 3

Round caps • ergonomic feel • panel sealed BUILD YOUR PART NUMBER ILLUMINATED SERIES MOUNTING Hard paint laser marked high intensity green ACTUATION FORCE surface mount PRINT TYPE PAINT COLOR COLOR frosted white ACTUATION FORCE surface mount black PRINT TYPE LEGEND COLOR* ABOUT THIS SERIES Notice : please note that not all combinations of above numbers are available. Contact APEM for more information. For more information on legends see the next two pages. 3

Open the catalog to page 3
10D+10DWY - 4

Legends Available for Multimec caps STANDARD LEGENDS STANDARD LEGENDS 10Q_ 10QM16_ START RESET STANDARD OPTIONS • 1DS: pad printed • 1FS: reverse printed • 10C: pad printed / laser marked • 1ZB: pad printed / laser marked • 10D: UV printed / laser marked • 1ZCS: pad printed / *reverse printed / *laser marked • 10R(F) & 10Q: pad printed / reverse printed • 1Z & 1ZW: pad printed / laser marked 1 • 10A: pad printed / laser marked

Open the catalog to page 4
10D+10DWY - 5

Available for Multimec caps HOW TO ORDER POSITIONING OF LEGENDS ON ROCKER-ACTION CAPS LEGEND ILLUMINATION • ption 1 - laser marked: In case of laser marked O legends an “LM” is added after the cap colour, before the legend code. We recommend using hard paint (additional “H” ) for increased lifetime of the paint. E.g. 1ZB16DLMH13609 When ordering legends for caps with hinge-type cap retention system, it is important to note the position of the cap. An extra letter (U, D, R or L) needs to be added to the part number to refer to the position of the hinges in relation to the legend. See...

Open the catalog to page 5
10D+10DWY - 6

Metal dark blue / No ral code Metal light grey / No ral code Metal dark grey / No ral code Metal bordeaux / No ral code Available for Multimec™ caps Solid colors

Open the catalog to page 6
10D+10DWY - 7

Multimec™ caps ACCERSSORY SPECIFICATIONS MATERIAL TEMP. LIMIT All lenses and transparent colour caps, lids for 1KBS & 1KCS Legends adhesion DS/EN ISO 2409 Class 1 & ASTM D3359 Class 4B

Open the catalog to page 7
10D+10DWY - 8

High performance tactile switches • MIL-PRF-28855H • excellent illumination DISTINCTIVE FEATURES Large range of accessories Momentary switches with NO or NC/NO function Sealed to IP67 Single or bi-color illumination option Illumination with integrated chip-LEDs ENVIRONMENTAL SPECIFICATIONS • Sealing : IP67 according to IEC 60529 • orking and storage temperature : W - non-illuminated: -40 °C/+160 °C (-40 °F to +320 °F) - illuminated: -30 °C/+85 °C (-22 °F to +185 °F) • oldering : S - through-hole : IEC 60068-2-20 8 - surface mount : JEDEC J-STD-020E ELECTRICAL SPECIFICATIONS • ecommended...

Open the catalog to page 8
10D+10DWY - 9

High performance tactile switches • MIL-PRF-28855H • excellent illumination RAS • SMD, TH or right angle TH • NO or NC/NO • SMD or TH • NO • single or bi-color LEDs All tolerances unless otherwise noted : ±0.2 mm PCB LAYOUT & CIRCUIT DIAGRAM NC/NO function

Open the catalog to page 9

All APEM catalogs and technical brochures

  1. Q8 series

    7 Pages

  2. NEW HMI CATALOG

    548 Pages

  3. SHORTFORM 2017

    17 Pages

  4. 13000X778

    5 Pages

  5. 660 series

    2 Pages

  6. 660

    5 Pages

Archived catalogs