Automatic Pressure Overflow Filler
Automatic Pressure Overflow Filler
The APACKS Automatic Overflow Filler is designed for consumer packaging applications requiring a consistent visual fill level. It is particularly effective for filling beverages and thin products, especially where foam or bottle inconsistency is a concern. The machine is adaptable for sanitary, hazardous, flammable, and corrosive environments.
Specifications
- Construction: Heavy-duty 304 stainless steel, tig-welded tube frame.
- Fill Heads: Available with 1 to 16 heads.
- Reservoir: Standard 304 stainless steel tank.
- Filling Size: Ranges from 1oz to 5 gallons.
- Power: 115VAC, single phase, 20 amp, 50-60Hz.
- Air Requirement: 5CFM at 80PSI clean, dry, compressed air.
- Controls: PLC with touch screen HMI, automatic pneumatic gates, and various sensors for operation efficiency.
Features
- Front panel start and emergency stop.
- Container counter and conveyor speed controls.
- No bottle/no fill sensor and bottle backup sensor.
- Mounted on four threaded leveling legs.
Options
- Drip tray, diving heads, and various wetted contact parts.
- Container neck locators and indexing options.
- Pressure assist for thick products.
- Custom applications and special electrical requirements.
- Additional remote emergency stops.
Applications
- Suitable for a wide range of products including sauces, syrups, light gels, shampoos, water, fruit juices, liquid tea and coffee, vegetable oil, tomato juice, salad dressings, perfumes, essential oils, thin liquid soap, light makeup remover, motor oil, urethane, and alcohol.
Operation Process
- Containers are aligned under the filling nozzles.
- Nozzles are lowered into the containers, sealing them with rubber washers.
- The fill cycle starts, and the pump fills the containers.
- Excess fluid is redirected back to the overflow tank once the liquid reaches the bottom of the outer nozzle tubes.
- Nozzles retract, allowing the operator to move the containers out of the fill area.
Contact Information
APACKS, 1500 Lake Street, La Porte, Indiana 46350. Local & Outside US: 219-369-4131, Toll-Free: 866-369-9030, Fax: 574-975-2711, Email: [email protected], Website: www.apacks.com
Catalog excerpts
Automatic Overflow Filler FILL IT. CAP IT. MOVE IT. MAKE IT HAPPEN! APACKS’ Automatic Overflow Filler is typically used in consumer packaging applications where a consistent visual (cosmetic) fill level is required. The Automatic Overflow filling machine is manufactured with a heavy duty 304 stainless steel, tigwelded tube frame and is available with 1to 16 Fill Heads. It also comes standard with PLC Controls and touch screen HMI, a 304 stainless steel reservoir, and Pneumatic Indexing Gates, plus many more features. Options are available for even more versatility. Overflow Fillers are commonly used for filling beverages and other thin products, especially where foam or bottle inconsistency might be an issue. APACKS’ Overflow Filler can be built to suit sanitary, hazardous, flammable and corrosive environments. • Standard Construction: Heavy duty 304SS, tig-welded tube frame • Number of Fill Heads: 1 to 16 • Reservoir: 304SS tank is standard • Filling Size: 1oz to 5gal • Power Requirement: 115VAC, single phase, 20 amp, 50-60Hz • Air Requirement: 5CFM @ 80PSI clean, dry, compressed air • Dimensions & Weight: Subject to model configuration • PLC Controls with touch screen HMI • Automatic Pneumatic Gates (Entry and Exit) • Front panel Start and Emergency Stop • Container Counter • On/off and speed Controls for Conveyor • No bottle/No fill Sensor • Bottle Backup Sensor ( delays operation until jam is cleared • Mounted on 4 threaded leveling legs 1500 Lake Street, La Porte, Indiana 46350
Open the catalog to page 1
Automatic Overflow Filler FILL IT. CAP IT. MOVE IT. MAKE IT HAPPEN! OPTIONS • Drip Tray • Diving Heads • 316SS or plastic wetted contact parts • Container Neck Locators • Starwheel or Timing Screw Indexing • Pressure Assist for thick products • Product Supply Pump • Custom applications • Special electrical requirements • Additional remote E-stops • Sanitary, hazardous, flammable and corrosive environment construction Applications • Sauces • Syrups • Light gels • Shampoos • Water • Fruit juices & extracts • Liquid tea • Liquid coffee • Vegetable oil • Tomato juice • Some salad dressings • Perfumes...
Open the catalog to page 2All APACKS catalogs and technical brochures
FILLING BOTTLES. MAKIN’ MONEY!10 Pages
Econoline Filling System2 Pages
- Marking machine
- Fully automatic filling machine
- Wrapping machine
- Liquids filling line
- Feeder
- Automatic labeling machine
- Turntable
- Automatic stretch wrapping machine
- Sorting machine
- Bottle filling system
- Stretch film stretch wrapping machine
- Electric rotary table
- Palletizer
- Food filler
- Volumetric filling line
- Benchtop marking machine
- Automatic sorting system
- Filling machine for the pharmaceutical industry
- Semi-automatic filling system
- Filler for the chemical industry