Humidity & temperature transmitter-AW series AOSONG
5Pages

Your specialist in innovating humidity & temperature sensors Relative Humidity & Temperature Transmitter Transmitter without LCD display Transmitter with LCD display AW series Capacitive humidity & temperature transmitter for Wall Mounting 1. Description: Aosong capacitive humidity element based humidity & temperature transmitters are ideal solution for detecting relative humidity and temperature in applications such as HVAC in residential & commercial buildings. The capacitance element based transmitter is one of the most stable transmitters available and no recalibration required, transmitters are temperature compensated and calibrated. Aosong transmitters are problem-free and accurate with long-term reliability by apply unique HydroProbe® digital technology, our transmitters are developed for high-precision measurement of relative humidity & temperature and transmitters are available for wall & duct & outdoor mounting. 2. Product highlights: Good-looking case, digital calibrated, long-term stability, standard industrial output, full range temperature compensated, wide detection range 3. Technical Specification: Power supply Humidity measuring range Humidity sensing element Output for humidity Accuracy of humidity Repeatability Hysteresis http://www.aosong.com Thomas Liu (Sales Manager) Email: thomasliu198518@aliyun.com , sales@aosong.com

Your specialist in innovating humidity & temperature sensors Sensitivity for humidity Drift rate per year Temperature sensor Accuracy of temperature Output for temperature 0~5V DC or 0~10V DC or 4~20mA Temperature Customer can select temperature range by dial-switches on PCB working range board: 0~50Celsius, -20~80Celsius, -40~60Celsius Storage temperature range -40..80Celsius Case ABS Electrical connection Screw connector( Max1.5mm2) 4. Ordering guide: AW3005, output 0~5V DC for humidity & temperature both, without LCD display AW3005Y, output 0~5V DC for humidity & temperature both, with...

Your specialist in innovating humidity & temperature sensors 7. Electrical connection diagram 1). Connection Diagram for voltage output --------------------------------------------------------------------------------------------------------------------------------------2). Connection Diagram for current output ------------------------------------------------------------------------------------------------------------3). Power Supply For 0-5V DC output, For 0-10V DC output, For 4~20mA output, Power supply is 12~36V DC Power supply is 15~36V DC Power supply is 12~36V DC when sampling resistor...

Your specialist in innovating humidity & temperature sensors 9. Cautions: Proper location of the room humidity sensor is important to ensure accurate measurement of representative air samples. Place the sensor in an area of room that has good air circulation. Install the sensor on a flat interior surface, approximately 1.4m from the floor. Avoid locating the sensor: * Near heat sources, such as radiant heat from the sun, heat from appliances, or from concealed pipe or chimneys * In areas subject to draft * Behind doors, draperies, or in corners * On walls having excessive vibration * In...

Your specialist in innovating humidity & temperature sensors (1): Damaged by human factor (2): Application beyond the using range as stated in product's technical specification (3): Damaged by corrosive or acid or alkaline air http://www.aosong.com Thomas Liu (Sales Manager) Email: thomasliu198518@aliyun.com , sales@aosong.com