ISOPALM 200 Cable fault locator

The fault locator ISOPALM 200 is designed to identify and locate with high precision any faults on telecom cables: insulation faults (bare, blasted, buried wires) and break on wires (partial or total break). Display of fault location in meters Suitable for Pupin coils Homogeneous and heterogeneous cables Description The fault locator ISOPALM 200 is designed to identify and locate with high precision any faults on telecom cables: insulation faults (bare, blasted, buried wires) and breaks on wires (partial or total break). Display of fault location in meters Suitable for Pupin coils Homogeneous...

Access menu to all functions Test on heterogeneous cables The ISOPALM 200 can set up to 9 sections when calculating distance to a fault on a cable made of wires of different diameters, overhead or underground wires. When wires of a same pair are of different types, ISOPALM 200 can use a third cable to calculate the distance to a fault. Display of fault position in meters After programming in the instrument of the parameters of every section of the cable under test (length, linear resistance, eventually temperature and pupins), the ISOPALM 200 displays the distance to the fault in meters with...

Specifications Measurement of AC / DC voltage Range Resistance measurement Range Isolation measurement at test voltage 50 to 100 V Range Isolation measurement at test voltage 150 to 300 V Range From 0 to 999 kΩ: 2 digits after coma From 1 MΩ to 9.99 MΩ: 2 digits after coma From 10 MΩ to 99.9 MΩ: 1 digit after coma From 100 MΩ to 5 GΩ: 0 digit after coma Isolation measurement at test voltage 350 to 500 V Range From 0 to 999 kΩ: 2 digits after coma From 1 MΩ to 9.99 MΩ: 2 digits after coma From 10 MΩ to 99.9 MΩ: 1 digit after coma From 100 MΩ to 10 GΩ: 0 digit after coma Capacitance measurement...

Fault location Type Fault between 2 wires on the same pair Fault between 2 wires on different pairs Fault between 1 wire and the ground Fault location methods integrated into the instrument Method Location of broken wire: With measurement of loop resistance, if Rab > 10 000 Ω, the wire is broken Test on homogeneous cables Location of insulation fault: If Ihealthy > 1000, Iunhealthy (ou Ib > 1000 Ia) Test on homogeneous and heterogeneous cables Fabe / Küpfmüller Location of insulation fault: If Ihealthy/ Iunhealthy > 2 x Rhealthy/Runhealthy, Ih+Iu > 1000 Rab, Ihealthy and Iunhealthy Test on homogeneous...

Storage temperature limits Maximum height Safety specifications Class In accordance with EN 61010-1 Category II, pollution 2

Models and accessories Instrument: ISOPALM 200 Cable fault locator Delivered in standard with: Remote looping device Set of testing leads and crocodile clips User manual Transport case, shoulder strap and stand Packing information: Size