Insulation tester The CRIT 100 controls the charge of static electricity and the insulation of operators and equipment before entering a pyrotechnical area, where user’s safety is at stake. Dual detection of resistance thresholds: Maximum value to prevent electrostatics hazards Minimum value to prevent industrial electric hazards

Description The accumulation of static electricity by an operator may lead to a degradation of quality of the products used or to a malfunction of some parts of the equipment. In some cases, static electricity may also be dangerous to the operator’s safety or to his environment. These risks may be prevented by using conductive equipment which carries electrostatic charges to the ground, thus preventing any accumulation. Operators generally wear conductive shoes, and floors are either built in constructive material or covered with conductive cloth. Other devices, positioned at the operator’s ankles...

Specifications Insulation resistance measurement (kΩ) Measurement and display range General specifications Dimensions 252 x 121 x 50 mm (CRIT100) 300 x 400 mm (Floor plate) 190 x 138 x 47 mm Module MT 100 for maintenance Type : 4 x1.5 V batteries, (type LR6). Automatic turn off after 10 seconds Type: 4 batteries x 1.5 V, (type LR6) Automatic turn off after 10 seconds ABS case with keyboard

Models and accessories Instrument: CRIT100 Insulation tester Floor testing plate with serial link Testing module Wall mounting frame Packing information: Size