Group: ASGARD
Catalog excerpts
CALYS 80P, field pressure calibrator with high accuracy 0.01% CALYS 80P is a field pressure calibrator within CALYS range with high accuracy of 0.01%.
Open the catalog to page 1Description CALYS 80P is a field pressure calibrator within CALYS range with high accuracy of 0.01%. CALYS are the perfect tools for advanced process maintenance and use on test bench in nonhazardous areas. Suitable for all field and lab measurements, CALYS 80P is dedicated to simultaneous measurement and generation over two isolated channels of pressure and process signals. It can also measure resistance signals and resistive probes. Providing extended functionalities (temperature simulation, scaling, steps, synthesizer, statistical functions…) and audit trails, CALYS series makes advanced...
Open the catalog to page 2Specifications Specifications and performances in temperature @23°C ±5°C Uncertainty is given in % of reading (CALYS 80P display) + fixed value. Resistive probes: Measurement and simulation Sensor Range (Input and Output) Connections: 2, 3 and 4 wires Rtd measurement excitation current: 0.2 mA Rtd cable compensation: up to 100 mΩ (for each wire) Rtd cable compensation error (Pt100): ±0.005°C/ of total wire Maximum load resistance: 600 Ω @ 20 mA Specifications and performances in pressure @23°C ±5°C Pressure Pressure media: AISI 316 SS compatible fluids (water, gas, and oil) Temperature...
Open the catalog to page 3Measurement by internal pressure module Reference Accuracy: ±0.025% F.S. Overpressure: 125% F.S. Port: female, 1/8" BSP Measurement by external pressure module Reference Accuracy: ±0.025% F.S. Overpressure: 125% F.S. Port: male, 1/4" BSP Connection wire length: 2 m Specifications and performances in process @23°C ±5°C DC voltage: Measurement and simulation 50-52 Avenue Paul Langevin, F-91130 Ris Orangis - Tél. : 01 69 02 88 88 - Fax : 01 69 02 04 38
Open the catalog to page 4Input impedance: < 10 MΩ for ranges up to 2 V > 500 kΩ for ranges up to 29 V Output impedance (emf output): < 0.5 Ω with a maximum current of 0.5 mA Output noise (at 300 Hz): < 2 μV pp for ranges up to 200 mV < 10 μV pp for ranges up to 2 V < 80 μV pp for ranges up to 20 V DC current: Measurement and simulation With or without loop supply Type Input impedance: < 20 Ω at 1 mA Emission limited to 21 mA max on passive current loop Loop supply: 24 V ±5% Resistance: Measurement Range Connections: 2, 3 and 4 wires Measurement excitation current: 0.2 mA Maximum load resistance: 1000 Ω @ 20 mA...
Open the catalog to page 5Statistical functions hold, max, min, offset, zero, average Transmitters tests The feature enables any pressure or temperature transmitter to be controlled and calibrated with simultaneous display of input and output values in % F.S. or in actual unit. The measuring circuit is also able to power the loop for a direct connection to the transmitter under test. Transmitter function CALYS 80P can be used as a transmitter. Any input signal (electric or pressure) can be converted into a 4-20 mA output. The galvanic insulation between the input and output channels allows this function to be used...
Open the catalog to page 6Environmental specifications Reference range Operating reference range Storage temperature limits Maximum height Safety specifications Protections Thermal fuse High voltage suppressor Resistor-diode voltage limiter class II 1G Ex ia IIC T4 (-20°C from T Ambient to +50°C)
Open the catalog to page 7Models and accessories Instrument: CALYS80P On-site documenting pressure calibrator with high accuracy 0.01% Delivered in standard with: Internal pressure module to select from the list below Battery charger Protection rubber holster Factory test report Internal pressure sensors - AISI316SS - ± 0.025% FS: (2 maximum) IPM000100G -100 / 100 mbar (gauge) - Res. 0.001 mbar -500 / 500 mbar (gauge) - Res. 0.01 mbar External pressure sensors - AISI316SS - ± 0.025% FS: EPM000100G -100 / 100 mbar (gauge) - Res. 0.001 mbar -500 / 500 mbar (gauge) - Res. 0.01 mbar
Open the catalog to page 8External hand pump: F3280013 From -0.8 to 2 bar pressure pump From -0.95 to 40 bar pressure pump From 0 to 350 bar oil / water pump External 700 bar oil / water pump External 700 bar oil / water pump with high pressure hose External 1000 bar oil/water pump with high pressure hose 700 bar oil/water compact bench Electrical signal test leads Vinyl carrying case with accessories folder MiniDin Connectors Kit Tc J, K, T, S Female connector MiniDin Connectors Kit Tc J, K, T, S Male connector Calibration software for CALYS 60 IS / 80 IS / 120 IS / 80P / 80P IS Supplied with USB cable COFRAC...
Open the catalog to page 9With all relevant data points where the device has been tested Packing information: Size Weight (nett) Weight (gross)
Open the catalog to page 10All AOIP catalogs and technical brochures
-
DRAGO 934
5 Pages
-
CALYS 1200
10 Pages
-
CALYS 1000
10 Pages
-
RAYOMATIC 16
7 Pages
-
RLV
5 Pages
-
EPM
10 Pages
-
UNIGAS 3000
7 Pages
-
RN 5306
5 Pages
-
LKS 1000 Leakshooter camera
6 Pages
-
TTI 10
6 Pages
-
RN 5360
5 Pages
-
MEGOHM 200
7 Pages
-
MF 28
6 Pages
-
IND 45
6 Pages
-
CALYS 1500
12 Pages
-
RAYOMATIC USB 2.2
6 Pages
-
RAYOMATIC PE
6 Pages
-
IRTEC P IVT
5 Pages
-
RAYOMATIC 16 2.2
6 Pages
-
RAYOMATIC NET
6 Pages
-
RAYOMATIC TC
6 Pages
-
ICO 51
6 Pages
-
LKS 1000
5 Pages
-
MILLIK
7 Pages
-
TM 6602 / 6612 / 6630
8 Pages
-
TC 6621 / 6622
10 Pages
-
SN 8310
7 Pages
-
CALYS 60 IS
9 Pages
-
CP 6632
7 Pages
-
THERMYS 150
10 Pages
-
CALYS 120 IS
12 Pages
-
ZX
5 Pages
-
OM 10
6 Pages
-
OM 21
8 Pages
-
ISOPALM 200
7 Pages
-
CRIT 100
4 Pages
-
IRtec P
11 Pages
-
FD 5 / 10 / 15
12 Pages
-
VNE20
5 Pages
-
OM 16
8 Pages
-
SATURN CYCLOP 878
4 Pages
-
CALYS 80 IS
11 Pages
-
P200 PRO
8 Pages
-
CALYS 150
8 Pages
-
motor starter
4 Pages
-
Frontdaq 10 isolated channels
4 Pages
-
Data Acquisition Systems DATALOG
12 Pages
-
Accuracy Thermometer PHP 602
2 Pages
Archived catalogs
-
2016 RAYOMATIC USB
6 Pages