Vacuum Cups and Suction Cups Generic P-Style / Vacuum and Suction Cup Fittings ANVER Generic Replacements of P-Style Vacuum Cups and Suction Cups Fittings Vacuum Cup Description and Part Number Dimensional Drawing Connection Thread Size Fitting Material Electro-Less Nickel-Plated Brass The 4-8 Barbed Fitting Male allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it fits all the same cups as the 4-8 Fitting, but in a 10-32 UNF version. Comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. Electro-Less Nickel-Plated Brass The 4-8 Fitting M5 Male is a 5 mm male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Comes with washer. Electro-Less Nickel-Plated Brass The 10-32 Fitting UNF Male allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Fits all the same cups as the 10-15 Fitting, but in a 10-32 UNF version. Comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. Electro-Less Nickel-Plated Brass The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. Captured O-Ring Seal 4-8 FITTING M5 MALE A-3107031 31.07.031 Captured O-Ring Seal STRENGTHENING RING SILICONE 20/30 Captured O-Ring Seal For SLSA-1 Suspensions, use the HSHN5 double male 5 mm adapter. Black Delrin Black Anodized Aluminum For SLSA-2 Suspensions, use the HS18G-18FG double female G 1/8" adapter. The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. For SLSA-1 Suspensions, use the HSHN5 double male 5 mm adapter. For SLSA-2 Suspensions, use the HS18G-18FG double female G 1/8" adapter. ➨ This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 36 Parmenter Road • Hudson MA 01749 USA • 978-568-0221 • 800-654-3500 • FAX 978-568-1570 • www.anver.com • E-Mail: [email protected]

Vacuum Cups and Suction Cups Generic P-Style / Vacuum and Suction Cup Fittings Vacuum Cup Description and Part Number 20-30 FILTER SCREEN A-3150163 31.50.163 STRENGTHENING RING SILICONE 40 Dimensional Drawing Connection Thread Size Fitting Material The 20-30 Filter Screen is used with 3-piece fitting for 20-30 Series cups and with the above 20-30 Connection Plate. Protects the vacuum system from incoming debris. The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. The 30 Button Valve is used in multiple cup applications. If a single cup does not...

Vacuum Cups and Suction Cups Generic P-Style / Vacuum and Suction Cup Fittings Vacuum Cup Description and Part Number Dimensional Drawing Connection Thread Size Fitting Material Black Anodized Aluminum The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" thread. The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. The 50 Button Valve is used in multiple cup applications. If a single cup...

Vacuum Cups and Suction Cups Generic P-Style / Vacuum and Suction Cup Fittings Vacuum Cup Description and Part Number 75 FILTER SCREEN A-3150215 31.50.215 Dimensional Drawing Connection Thread Size Fitting Material The 75 Filter Screen is used with 3-piece fitting for 75 Series suction cups and with the above 75 Fitting 1/8". Protects the vacuum system from incoming debris. Black Anodized Aluminum The 110 Fitting 1/2" with 1/2" female center port connection with optional NPSF 1/8" female port often used as a blow-off port. The 110 Connection Plate is to be imbedded in the 110 Series suction cup's...