Two Pad Lift Frame - up to 500 lb (227 kg)Doc. No. 13600042E ANVER'S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials. Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected. Basic features on ANVER's Standard Horizontal Vacuum Lifters include: vacuum leakage sensor and warning system; attach/release slide valve with safety lock; and locking hand knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable). ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements. The L50M2-48, -61, and -86 two pad lifting frames are ideal for handling carbon steel and stainless steel sheets and plates with a capacity up to 500 lb (227 kg). The type of vacuum lifter - Mechanical, Air, or Electric - paired with the number of pads used will depend on your application needs. Foam pads are not available for mechanical vacuum generators. •Lifting frame shown with vacuum generator and/or optional accessories, not included. Vacuum pads moved inwards to handle shorter plate. Lifting Frame Number Anver Corp, 36 Parmenter Rd., Hudson, MA 01749 USA +1-978-568-0221 ANVER.COM

Two Pad Lift Frame - up to 500 lb (227 kg) Doc. No. 13600042E Vacuum pads in fully extended position to handle maximum plate size. Vacuum pads moved inwards to handle shorter plate. Lifting Frame Number Rated Load Capacity [lbs (kg)] Unit Weight [lbs (kg)] A Pad Diameter [in. (mm)] B Lifting Frame Headroom [in. (mm)] C Beam Length [in. (mm)] D Hardware Mounting Centers [in. (mm)] E Pad Distances Maximum [in. (mm)] E Pad Distances Minimum [in. (mm)] Maximum Sheet Size [ft (M)] Seal Number