Three Pad Lifting Frames - up to 750 lb (340 kg) ANVER.COM Doc. No. 13600051D ANVER’S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials. Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected. Basic features on ANVER’s Standard Horizontal Vacuum Lifters include: vacuum leakage sensor and warning system; attach/release slide valve with safety lock; and locking hand knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable). ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements. The L75M3-48, -61, -86, and -110 three-pad lifting frames are ideal for handling carbon steel and stainless steel sheets and plates with a capacity up to 750 lb (340 kg). The type of vacuum lifter – Mechanical, Air, or Electric – paired with the number of pads used will depend on your application needs. Foam pads are not available for mechanical vacuum generators. *Lifting frame shown with vacuum generator and/or optional accessories, not included. Vacuum pads in maximum position to handle maximum plate size. C Vacuum pads moved inwards to handle minimum plate size. Center vacuum pad (1/3 capacity) used for short, narrow plates. Outer pads provided with shut-off valves. Lifting Frame Number B Lifting Frame Headroom [in. (mm)] E Hardware Mounting Centers [in. (mm)] Rated Load Capacity [lbs (kg)] Unit Weight [lbs (kg)] Maximum Sheet Size [ft (M)] Seal Number Anver Corp, 36 Parmenter Rd., Hudson, MA 01749 USA ISO 9001 Certified

Three Pad Lifting Frames - up to 750 lb (340 kg) ANVER.COM Vacuum pads in maximum position to handle maximum plate size. Vacuum pads moved inwards to handle minimum plate size. B Center vacuum pad (1/3 capacity) used for short, narrow plates. Outer pads provided with shut-off valves. Lifting Frame Number Rated Load Capacity [lbs (kg)] B Lifting Frame Headroom [in. (mm)] E Hardware Mounting Centers [in. (mm)] Maximum Sheet Size [ft (M)] Seal Number Anver Corp, 36 Parmenter Rd., Hudson, MA 01749 USA ISO 9001 Certified