Four Pad Lifting Frames - up to 500 lb (227 kg) ANVER.COM Doc. No. 13600063C ANVER’S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials. Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected. Basic features on ANVER’s Standard Horizontal Vacuum Lifters include: vacuum leakage sensor and warning system; attach/release slide valve with safety lock; and locking hand knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable). ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements. The L50M4-61-2/44 and -86-2/44 four-pad lifting frames are ideal for handling carbon steel and stainless steel sheets and plates with a capacity up to 500 lb (227 kg). The type of vacuum lifter – Mechanical, Air, or Electric – paired with the number of pads used will depend on your application needs. Foam pads are not available for mechanical vacuum generators. *Lifting frame shown with vacuum generator and/or optional accessories, not included. Crossarms and vacuum pads in maximum position to handle maximum plate size. G Crossarms can pivot to near parallel with spreader beam to handle narrow plates. Vacuum pads and crossarms fully adjustable to handle short and narrow plates. Lifting Frame Number A Lifting Frame Headroom [in. (mm)] B Spreader Beam Length [in. (mm)] Rated Load Capacity [lbs (kg)] C Hardware Mounting Centers [in. (mm)] Maximum Sheet Size [ft (M)] Seal Number Anver Corp, 36 Parmenter Rd., Hudson, MA 01749 USA ISO 9001 Certified

Four Pad Lifting Frames - up to 500 lb (227 kg) ANVER.COM Crossarms and vacuum pads in maximum position to handle maximum plate size. G Crossarms can pivot to near parallel with spreader beam to handle narrow plates. Vacuum pads and crossarms fully adjustable to handle short and narrow plates. Lifting Frame Number Rated Load Capacity [lbs (kg)] A Lifting Frame Headroom [in. (mm)] B Spreader Beam Length [in. (mm)] C Hardware Mounting Centers [in. (mm)] Maximum Sheet Size [ft (M)] Seal Number Anver Corp, 36 Parmenter Rd., Hudson, MA 01749 USA ISO 9001 Certified