*mydirectindustry

Catalogs
ANTIPODA, LDA
Conveyor Solutions - BOX Handling

Conveyor Solutions - BOX Handling

Product catalog summary

Overview: The document provides comprehensive specifications and configurations for roller conveyor systems used in parcel and postal handling. It focuses on line-shaft drive and slave sections, detailing dimensions, roller pitches, conveyor speeds, and technical specifications.

Specifications: The roller conveyors feature a reinforced double-formed 3 mm S235JR steel frame, available in standard and custom colors. Rollers are 50 mm in diameter, made from zinc-plated steel with radial bearings, and available in lengths of 450 mm, 650 mm, 850 mm, and 1000 mm. Roller pitches include 53 mm, 60 mm, 90 mm, and 120 mm. The maximum load capacity is 50 kg/m, extendable to 500 kg with a single drive for straight sections. The system is designed for horizontal applications only, with an operating temperature range of 5°C to 50°C.

Drive System: Utilizes SEW gearmotors with voltage and frequency options of 230/400V and 330/575V, rated IP54, and compliant with CE, UR, and CSA standards. Conveyor speeds are adjustable, with standard options of 20 m/min, 25 m/min, and 30 m/min.

Configurations: Part numbers are derived based on parameters such as prefix, drive type, alignment side, distance between frames, roller pitch, conveyor speed, conveyor length, and shaft protection cover, allowing for customization.

Support and Accessories: Conveyor supports and side guides are not included and must be ordered separately. Recommendations for the number of supports based on load distribution are provided.

Order Examples: Examples illustrate how to specify configurations using the part number derivation system, detailing conveyor length, speed, roller pitch, and alignment side.

Rollerdrive Systems: Motorized with a 24VDC Ø 50 mm zinc-plated rollerdrive, offering speed codes of 15, 25, and 45, corresponding to speeds from 2m/min to 60m/min. Designed for horizontal applications, handling load travel in both directions.

Transmission and Supports: Options include poly-v and round belt, with a maximum of 11 slave rollers per rollerdrive for round belts and 20 for poly-v. Tables recommend the number of supports required for uniformly distributed loads.

Zero Pressure Accumulation (ZPA): Uses a circuit board to manage two zones of zero pressure accumulation, connecting motorized roller drives and sensors, with Sick GL6 type photoelectric sensors and PL10F reflectors for zone control.

Additional Components: Includes inclined supports, horizontal supports, frame connections, adjustable photocell supports, side guide supports, and stoppers, each with specific part numbers and references.

Key Recommendations: Emphasizes selecting the correct number of supports based on conveyor length and load distribution, and proper configuration for optimal performance and safety.

Catalog excerpts

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS PRE-ENGINEERED PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS Series 200.10

Open the catalog to page 1

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS

Open the catalog to page 2

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS IDLE CONVEYOR BELT CONVEYOR Head Drive Central Drive Central Drive Str. + Outf. Roller Conveyor

Open the catalog to page 3

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS Supports Horizontal Supports Inclined Supports Gate - 114 Side Guide Fixed - 116 Side Guide Above Frame - 118 Side Guide Adjustable - 119 Side Guide Curve

Open the catalog to page 4

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLERS Adjustable Side Guide Support 200.10.90.75 - 123 - Fixed Side Guide 200.10.90.70 - 119 - Adjustable Photocell Supports 200.10.90.61 - 130 - Side Guide Supports 200.10.90.72 - 121 -

Open the catalog to page 5

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLERS STRAIGHT SPECIFICATIONS Reinforced double formed 3 mm S235JR frame Standard coating: Other colors upon request. Pitch RAL 53 1021 60 | 90 | 120 5017 Ø 50 mm roller, 1.5 mm thickness zinc plated steel tube. Ø12 mm, spring loaded shaft. Radial 6002-2RZ bearings. Roller lengths 450 mm, 650 mm, 850 mm, and 1000 mm available. Other roller lengths upon request. 53 mmm, 60 mm, 90 mm, and 120 mm. 50 kg/m. Both. Both. Not included. Available fixed (page 120) and adjustable (page 123) side guides. Are not included with conveyor, specified...

Open the catalog to page 6

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLERS STRAIGHT DIMENSIONS DISTANCE BETWEEN BF FRAMES P ROLLER PITCH L CONVEYOR LENGTH * Roller surface 5mm above frame

Open the catalog to page 7

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLERS STRAIGHT ROLLER PITCH 53 mm REFERENCE TREE PREFIX 200.10.30.10.11 TABLE 1 DISTANCE BETWEEN FRAMES (mm) 450 650 850 1000

Open the catalog to page 8

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLERS STRAIGHT ROLLER PITCH 60 mm REFERENCE TREE PREFIX 200.10.30.10.11 TABLE 2 DISTANCE BETWEEN FRAMES (mm) 450 650 850 1000

Open the catalog to page 9

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLERS STRAIGHT ROLLER PITCH 90 mm REFERENCE TREE PREFIX 200.10.30.10.11 TABLE 3 DISTANCE BETWEEN FRAMES (mm) 450 650 850 1000

Open the catalog to page 10

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLERS STRAIGHT ROLLER PITCH 120 mm REFERENCE TREE PREFIX 200.10.30.10.11 TABLE 4 DISTANCE BETWEEN FRAMES (mm) 450 650 850 1000

Open the catalog to page 11

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLER CURVE SPECIFICATIONS Side Frame Conveyor Rollers Conveyor Angles Maximum Load Inner Radius Inner Roller Pitch (Pi) Outer Roller Pitch (P) Inclined/Declined Load Travel Direction Conveyor Side Guides Conveyor Supports Operating Temperature Reinforced double formed 3 mm S235JR frame. Standard coating RAL 5017. Other colors upon request. Idle tapered rollers. Ø12 mm, spring loaded shaft. Radial 6002-2RZ bearings. Roller lengths 450 mm, 650 mm, 850 mm, and 1000 mm available. Other roller lengths upon request. 30o, 45o, 60o and...

Open the catalog to page 12

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLER CURVE ORDER EXAMPLE: 200.10.30.10.21 12 Rollers 60o Conveyor Angle 450 mm Distance Between Frames Box Handling Steel Frame, Idle Curve Roller Conveyor * Roller surface 5mm above frame DIMENSIONS BF BETWEEN FRAMES CONVEYOR ANGLE  Ri INNER RADIOUS Pi INNER ROLLER PITCH P OUTER ROLLER PITCH

Open the catalog to page 13

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLER CURVE REFERENCE TREE PREFIX 200.10.30.10.21 TABLE 5 DISTANCE BETWEEN FRAMES (mm) 450 650 850 1000 6 2 7 9 45 2 11 12 60 2 14 18 90 3 22 * Recommended number of supports for a uniformly distributed load on the conveyor. For more details, please see page 115. 30

Open the catalog to page 14

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLER MERGE SPECIFICATIONS Reinforced double formed 3 mm S235JR frame Standard coating: Other colors upon request. Pitch RAL 53 1021 60 | 90 | 120 5017 Ø 50 mm roller, 1.5 mm thickness zinc plated steel tube. Ø12 mm, spring loaded shaft. Radial 6002-2RZ bearings. Roller lengths 450 mm, 650 mm, 850 mm, and 1000 mm available. Other roller lengths upon request. 30o and 45o. 53 mmm, 60 mm, 90 mm, and 120 mm. 50 kg/m. Not suitable. Horizontal application only. Both. Not included. Available fixed (page 120) and adjustable (page 123)...

Open the catalog to page 15

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLER MERGE * Roller surface 5mm above frame DIMENSIONS BF BETWEEN FRAMES INFEED/OUTFEED ANGLE  P ROLLER PITCH L CONVEYOR LENGTH

Open the catalog to page 16

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR IDLE ROLLER MERGE REFERENCE TREE DISTANCE INFEED/OUTFEED ROLLER * NUMBER MERGE BETWEEN ANGLE PREFIX PITCH OF SIDE FRAMES o) (mm) SUPPORTS ( (mm) 200.10.30.10 . 12 . 450 . 53 . 30 1 13 650 60 45 1 850 90 1 1000 120 1 * Recommended number of supports for a uniformly distributed load on the conveyor. For more details, please see page 115.

Open the catalog to page 17

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR LINE-SHAFT Adjustable Side Guide Support 200.10.90.75 - 123 - Fixed Side Guide 200.10.90.70 - 119 - Adjustable Photocell Supports 200.10.90.61 - 130 - Side Guide Supports 200.10.90.72 - 121 -

Open the catalog to page 18

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR LINE-SHAFT - DRIVE SECTION STRAIGHT SPECIFICATIONS Side Frame Reinforced double formed 3 mm S235JR frame. Standard coating: Pitch Other colors upon request. 53 60 | 90 | 120 Conveyor Rollers Ø 50 mm roller, 1.5 mm thickness zinc plated steel tube. Ø12 mm, spring loaded shaft. Radial 6002-2RZ bearings. Roller lengths 450 mm, 650 mm, 850 mm, and 1000 mm available. Other roller lengths upon request. Roller Pitch Maximum Load Gearmotor Drive Conveyor Speed Inclined/Declined Load Travel Direction Conveyor Side Guides Conveyor Supports Operating...

Open the catalog to page 19

PARCEL AND POSTAL HANDLING CONVEYOR SYSTEMS ROLLER CONVEYOR LINE-SHAFT - DRIVE SECTION STRAIGHT ORDER EXAMPLE: 200.10 No Shaft Cover 1961 mm Conveyor Length 25 m/min Conveyor Speed 53 mm Roller Pitch 450 mm Distance Between Frames Straight Line-Shaft Drive Section, SEW Gearmotor 230/400V / 50Hz / 3 phase rated voltage, IP54, CE Drive Box Handling Steel Frame DIMENSIONS BF BETWEEN FRAMES P ROLLER PITCH L CONVEYOR LENGTH * Roller surface 5mm above frame

Open the catalog to page 20

Conveyor Solutions - BOX Handling

Conveyor Solutions - BOX Handling

Catalog excerpts

All ANTIPODA, LDA catalogs and technical brochures