*mydirectindustry

LNX-1002NS-67-T

Product catalog summary

Specifications:
The Lanolinx LNX-1002NM-67-T is an 8-Port 10/100TX IP-67 + 2-Port 100FX Managed Industrial Switch with a back-plane switching fabric of 2Gbps. It supports Ethernet ring redundancy with a recovery time of less than 10ms and IPv6 management. The device features a wide-range redundant power design and supports TFTP firmware updates and system configuration restoration/backup. It is EN50155 compliant.

Features:
The switch supports SSH v2, port mirroring, multicast filtering, IP security, login security with IEEE 802.1x authentication, MAC violation detection, bandwidth control, flow control, system log, SMTP for alerts, relay alarm, SNMP trap, DHCP, DNS, SNTP, and firmware updates. It allows configuration upload and download and supports IfAlias for unique port naming.

Power and Mechanical Specifications:
Power input is DC 12 ~ 48V with redundant power inputs and reverse polarity protection. Maximum power consumption is 8.1 Watts at 48VDC. The dimensions are 193 x 176 x 62.5 mm, and it is designed for wall-mount installation. The unit weighs 2 lbs, with a shipping weight of 3 lbs. It operates in temperatures from -40°C to 75°C and humidity from 5% to 95% non-condensing.

Standards and Compliance:
The switch complies with various IEEE standards, including 802.3, 802.3u, 802.3x, 802.3ad, 802.1d, 802.1w, 802.1p, 802.1Q, and 802.1x. It supports a switching fabric of 2Gbps and a packet throughput ability of 3.9Mpps at 64 bytes. The MAC address table supports 8K entries, and the packet buffer is 1 Mbit.

Network and Management:
It features multiple connectors for network and power, supports various network cables, and has optical cable options for multi-mode and single-mode with specific distances and wavelengths. The switch supports SNMP, VLAN, port trunking with LACP, LLDP, redundancy protocols, IPv6, quality of service, class of service, port security, and SSL compliance.

Ordering Information:
Two models are available: LNX-1002NM-67-T for multi-mode 2KM and LNX-1002NS-67-T for single-mode 30KM.

Catalog excerpts

Features ► Back-Plane(Switching Fabric): 2Gbps ► Provides 100Mbps LC Type Connector ► Supports Ethernet Ring Redundancy Function Recovery Time <10ms ► IPv6 Management ► Wide-Range Redundant Power Design ► TFTP Firmware Update and System Configuration Restoration/Backup ► EN50155 Compliant Antaira Technologies e-Mail: [email protected] Website: http://ww

Open the catalog to page 1

EEE802.3x Flow Control and Back-Pressure EEE 802.3ad PortTrunking with LACP EEE802.1d Spanning Tree / IEEE 802.1w Rapid Spanning Tree IEEE 802.1x User Authentication (RADIUS) Switch Architecture Back-Plane (Switching Fabric): 2Gbps Packet Throughput Ability (Full-Duplex): 3.9Mpps @ 64byt.es Transfer Rate 148,800pps for Fast Ethernet Port Packet Buffer 10/100TX: 8 x M12, 4-pole D-coded, Female with Auto MDI/MDI-X Function Fiber: 2 x LC type connector for single/multi-mode type fiber cable Power Connector: 1 x M12, 5-pole A-coded, Male P-Fail Connector: 1 x M12, 3-pole A-coded, Female RS-232 Connector:...

Open the catalog to page 2

All Antaira Technologies catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list