*mydirectindustry

LNX-1002NM-67-T

Product catalog summary

Specifications:
The Lanolinx LNX-1002NM-67-T is an 8-Port 10/100TX IP-67 + 2-Port 100FX Managed Industrial Switch. It features a back-plane switching fabric of 2Gbps and provides a 100Mbps LC type connector. The switch supports Ethernet ring redundancy with a recovery time of less than 10ms and IPv6 management. It includes a wide-range redundant power design and supports TFTP firmware updates and system configuration restoration/backup. The device is EN50155 compliant.

Features:
The switch is SSH v2 compliant and supports port mirroring for TX, RX, or both packets. It includes dynamic and static multicast filtering, supporting up to 256 multicast groups. IP security is enhanced with support for up to 10 IP addresses for secured access, and login security is ensured through IEEE 802.1x authentication/RADIUS. The switch supports MAC violations, bandwidth control, flow control, system log recording, SMTP for alerts, relay alarms, SNMP traps, DHCP, DNS, SNTP, and firmware updates. Configuration upload and download are supported via binary configuration files.

Power and Mechanical Specifications:
The switch operates on DC 12 ~ 48V with redundant power inputs and reverse polarity protection. It consumes a maximum of 8.1 Watts at 48VDC. The dimensions are 193 x 176 x 62.5 mm, and it is designed for wall-mount installation. The unit weighs 2 lbs, with a shipping weight of 3 lbs. It operates in temperatures ranging from -40°C to 75°C and humidity from 5% to 95% non-condensing. Storage temperature ranges from -40°C to 85°C.

Compliance and Safety:
The switch complies with FCC Class A, CE EN61000 standards, and is UL-508 certified for hazardous locations. It has undergone stability testing for shock, free fall, and vibration. The product comes with a 5-year warranty.

Network and Protocol Support:
The switch supports IEEE standards for Ethernet, flow control, port trunking, spanning tree, class of service, VLAN tagging, and user authentication. It has a switching fabric of 2Gbps and a packet throughput ability of 3.9Mpps at 64 bytes. The MAC address table supports 8K entries, and the packet buffer is 1 Mbit. The switch supports SNMP management, VLAN configurations, port trunking with LACP, LLDP, redundancy protocols, IPv6, quality of service, and port security.

Ordering Information:
The LNX-1002NM-67-T is available in multi-mode for 2KM and single-mode for 30KM distances.

Catalog excerpts

Features ► Back-Plane(Switching Fabric): 2Gbps ► Provides 100Mbps LC Type Connector ► Supports Ethernet Ring Redundancy Function Recovery Time <10ms ► IPv6 Management ► Wide-Range Redundant Power Design ► TFTP Firmware Update and System Configuration Restoration/Backup ► EN50155 Compliant Antaira Technologies e-Mail: [email protected] Website: http://ww

Open the catalog to page 1

EEE802.3x Flow Control and Back-Pressure EEE 802.3ad PortTrunking with LACP EEE802.1d Spanning Tree / IEEE 802.1w Rapid Spanning Tree IEEE 802.1x User Authentication (RADIUS) Switch Architecture Back-Plane (Switching Fabric): 2Gbps Packet Throughput Ability (Full-Duplex): 3.9Mpps @ 64byt.es Transfer Rate 148,800pps for Fast Ethernet Port Packet Buffer 10/100TX: 8 x M12, 4-pole D-coded, Female with Auto MDI/MDI-X Function Fiber: 2 x LC type connector for single/multi-mode type fiber cable Power Connector: 1 x M12, 5-pole A-coded, Male P-Fail Connector: 1 x M12, 3-pole A-coded, Female RS-232 Connector:...

Open the catalog to page 2

All Antaira Technologies catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list