*mydirectindustry

FCU-100SC-S8

Product catalog summary

Specifications:
The document outlines the specifications for the Optolinx FCU-100, a 10/100BaseTX to 100BaseFX Media Converter. It complies with IEEE 802.3 100BaseT and 802.3u 100BaseTX/FX standards and features a store-and-forward switching mechanism. The device supports auto-crossover for MDI/MDIX in the TP port, 10/100Mbps auto-negotiation, and link-fault-pass-through. It includes LED indicators for power, FDX, TP 100, TP Link/Act, Fiber 100, and Fiber Link/Act. The converter supports a 1K MAC address and a 48K byte packet buffer. Configuration is facilitated by a DIP switch supporting auto, speed, duplex, auto MDI/MDIX, and link-fault-pass-through. The product comes with a 5-year warranty.

Technical Specifications:
The switching method is store and forward, with a data transfer rate of 200 Mbps in full duplex. The MAC table supports 1K entries, and the memory buffer is 48K. The filtering rate is 14,880 pps for Ethernet and 148,800 pps for Fast Ethernet. Power is supplied externally at DC 5V, 1.6A, with a power consumption of 5 Watts. The operational temperature range is 0°C to 50°C, and storage temperature is -20°C to 60°C. The device operates in humidity levels of 5% to 90% non-condensing. It features an IP30 metal casing, dimensions of 71 x 94 x 26 mm, and a weight of 0.6 Kg. Installation options include DIN-Rail or wall mounting. The device meets FCC Class A and CE emission/safety standards.

Product Variants:
The document lists several product variants, including FCU-100SC, FCU-100ST, FCU-100SC-S3, FCU-100SC-S5, FCU-100SC-S8, FCU-100WA-S2, FCU-100WB-S2, FCU-100WA-S8, and FCU-100WB-S8. These variants differ in terms of mode (multi-mode or single-mode), connector type (SC or ST), and typical distance (ranging from 2 Km to 80 Km).

Optional Accessories:
Optional accessories include SC (Male) to ST (Female) duplex adapters for both multi-mode and single-mode, mounting brackets for FCU modules, and a DIN-Rail mounting kit.

Interface and Connector Types:
The interface includes a 10/100BaseT RJ45 port and a 100BaseFX SC port. Connector types vary among the product variants, with SC and ST connectors available.

Optical Specifications:
The document provides detailed optical specifications, including wavelength, typical distance, minimum and maximum TX power, sensitivity, and link budget for each product variant.

Catalog excerpts

Features ► Complies with IEEE 802.3 100BaseT & 802.3u 100BaseTX/FX Standards ► Store-and-Forward Switching Mechanism ► Auto-Crossover for MDI/MDIX in TP Port ► 10/100Mbps Auto Negotiation ► Supports Link-Fault-Pass-Through ► LED: Power, FDX, TP 100, TP Link/Act, Fiber 100, Fiber Link/Act ► Supports 1K MAC Address ► Supports 48K Byte Packet Buffer ► Configuration DIP Switch Supports Auto, Speed, Duplex, Auto MDI/MDIX, & Link-Fault-Pass-Through ► 5-Year Warranty Side View Panel View (SC) Antaira Technologies e-Mail: [email protected] Rear View -

Open the catalog to page 1

Switching Method Store and Forward Data Transfer Rate 200 Mbps - Full Duplex MAC Table 1K Memory Buffer 48K Forward/Filter Rate Filtering Rate (Ethernet) - 14,880 pps Filtering Rate (Fast Ethernet) - 148,800 pps LED Power, FDX, TP100, TP Link/ACT, FX100, FX Link/ACT Power External Power Supply: DC 5V, 1.6A Power Consumption 5 Watts Operation Humidity 5% to 90% (Non-condensing) Mechanical Casing: IP30 Metal Case Dimension (W x H x D): 71 x 94 x 26 mm (2.80 x 3.70 x 1.02 inches) Weight: 0.6 Kg (1.3 lbs) Installation: DIN-Rail/Wall Mountable Emission/Safety FCC Class A, CE Warranty 5-Year Warranty...

Open the catalog to page 2

All Antaira Technologies catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list