SAPPHIRE® PLUS Total Flood Fire Suppression System
2Pages

DATA SHEET SAPPHIRE® PLUS Total Flood Fire Suppression System Features n  UL/ULC Listed and FM Approved n  ully meets EN 12094 F n  esigned according to NFPA 2001, EN 15004, and ISO 14520 D n  L and FM verified software U n  elector valve systems S n  vailable with standard pressure gauge or contacted A pressure gauge for pressure monitoring n  lectric, pneumatic, or manual operation E n  entralized storage locations C n  educed pipe diameters for traditional systems R Applications The ANSUL® SAPPHIRE® PLUS Total Flood Fire Suppression System utilizes 3M™ Novec™ 1230 Fire Protection Fluid as the suppression agent. Novec 1230 fluid is effective for the following total flooding fire suppression applications: n Data centers n  lectrical switching rooms E n Machinery spaces n Medical facilities n  eritage and cultural sites H n  ir traffic control A n  il and gas facilities O Specifications Environmental Data Ozone Depletion Potential (ODP) Global Warming Potential (GWP) Atmospheric Lifetime (ALT) Operating and storage temperature Note: Temperature range is dependent on fill density and nozzle coverage. For details, refer to the latest revision of the SAPPHIRE PLUS Total Flood Fire Suppression System Manual (Part No. 571000). Description Conventional SAPPHIRE systems use a storage pressure of 363 psi (25 bar) or 609 psi (42 bar), which is suitable for many applications. The SAPPHIRE PLUS system uses a storage pressure of 1,015 psi (70 bar) to provide the designer with more flexibility when planning the layout of the system. This superpressurization means the containers can be placed further from the hazard area, if required. The use of smaller pipe diameters, and the use of selector valves help to protect multiple areas using one bank of containers. Approvals and Listings n  UL/ULC Listed n  FM Approved n  CE Marked Physical Properties of 3M Novec Properties Molecular weight Boiling point at 1,013 bar (absolute) Freezing point Vapor pressure 68 °F (20 °C) Liquid density 68 °F (20 °C) Saturated vapor density 68 °F (20 °C) Heat of vaporization at boiling point Chemical formula Chemical name * bar = 0.1 MPa = 100,000 Pa = 14.5 psi; 1 1 MPa = 1 N/mm2 Safety Data Sheets (SDS) are available at www.ansul.com One Stanton Street  |  Marinette, WI 54143-2542, USA  | +1-715-735-7411 | www.ansul.com © 2018 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revisi

Ordering Information From Marinette, Wisconsin, USA (UL/ULC Listed and FM Approved) Standard1 Contacted1 DOT*/TPED Gauge/Con. Gauge/Con. Nom. Size | Temp. Part No. Part No. L (lb) | °F (°C) Height to Outlet Diameter in. (mm) in. (mm) Manifold Bracket Height with AHA in. (mm) * anada and the USA mutually recognize the regulatory approvals for UN pressure receptacles. This means that UN pressure receptacles manufactured in C accordance with 49 CFR (Code of Federal Regulations) marked with USA as the country of approval, commonly referred to as DOT, satisfy the TC requirements. From Great...