FIREFIGHTING FOAM PRODUCTSCATALOG >

IsYour Foam Washed Up? > The only way to be sure of foam quality is through annual testing,as recommended by NFPA11 NFPA11:Standard for Low-Expansion Foam, Chapter 7.2, Foam Concentrate Inspection, states:At leastannually, an inspection shall be made of foam concentrates and their tanks or storage containers for evidence of excessive sludging or deterioration. Samples of concentrates shall be sent to the manufacturer or qualified laboratory for quality condition testing. Quantity of concentrate in storage shall meet design requirements, and tanks or containers shall normally be kept full, with...

For use on Class B hydrocarbon fuelfires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 1% solution in fresh, salt or hard water. 1% premix in fresh or potable water. ULListed. 5gal. (19 L) pail 55 gal. (208 L) drum 55 gal. (208 L) drum PART NO. 54892 PART NO. 55811 For use on Class B hydrocarbon fuelfires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 3% solution in fresh, salt or hard water. 3% premix in fresh or potable water. Concentrate is freeze protected to 20 ְF (29...

This program is recommended for all personnel involved in the specification,design, installation or commissioning of foam systems. It includes all areas of the design, equipment selection, foam agent application and installation of fixed foam systems for a variety of hazards in accordance withNFPA Standards. Special emphasis is given to the identification and specifications of all component parts of the different fixed foam systems. > Foam Agents Bladder Tank Systems U.L. 162 AFFFTest Demonstration High Expansion Foam Demonstration Balanced Pressure Proportioning System System Component Analysis...

High Expansion Generator, JET-X-2 PART NO. 420000High Expansion Generator, JET-X-2A Water-powered. Designed to deliver JET-X > ή high expansion foam withamaximum output capacity of 20,000 cfm. The generators are of steel construction with a water powered motor and stainless steel foam screen. No electrical power is required. The generators come in various sizes and are used for both portable and fixed-system applications. 1,770 CFM @ 75 psi (5 bar). PART NO. 420001High Expansion Generator, JET-X-5 3,200 CFM @ 75 psi (5 bar). PART NO. 420002High Expansion Generator, JET-X-5A 6,720 CFM @ 75 psi...

For use on Class B fuel fires: 3%concentrate on hydrocarbon fuels such as gasoline, fuel oil, etc. and 6% on polar solvent (water miscible) fuels such as methyl alcohol, acetone, MTBE, etc. Aspirated or nonaspirated discharge devices. 3%/6% solution in fresh, salt or hard water. 3%/6% premix in fresh or potable water. ULListed and FM Approved.5gal. (19 L) pail For use on Class B hydrocarbon fuelfires such as crude oils, gasoline, diesel fuels and aviation fuels. Must be used with air aspirating type discharge devices. 3% solution in fresh, salt or hard water. ULListed.5gal. (19 L) pail PART NO....

PART NO. 428706 For use on highly toxic chemicals likechlorine dioxide and titanium tetrachloride. Mitigates dangerous vapor releases and simultaneously neutralizes (with the addition of an acidic or caustic agent, depending on the application) the spilled material without causing additional vapor release.5-gal. (19 L) pail PART NO. 428499 Not intended for live fire training or for actual firefighting operations. Functional in any proportioning and generating equip- ment. Minimizes effects of training on the environment. Expansion and drainage characteristics similar to conventional 3% and 6%...

Elastomeric bladder stores foam liquid concentrate discharged by incoming water applying pressure to bladder. Standard Red PaintPART NO. 404127 > Bladder tank with 2 in. proportioner for nominal flow range of 30-300 gpm (114-1136 Lpm). Standard Red Paint PART NO. 403942 > Continuous flow hose reel with straight-through internal fittings, designed to provide a minimum pressure drop. 1-1/2 in. hard rubber booster hose.Nozzle is variable stream (water/AFFF), rated for nominal flow of 95 gpm (379 Lpm) at 100 psi (7 bar). Standard Red Paint, 75 ft. hosePART NO. 76400Standard Red Paint, 100 ft. hosePART...

Used with all low expansion foam agents. Portable, air aspiratingstainless steel nozzle with ball shutoff valve. Recommended for use with the ANSULModel Z eductor. Brass construction. Flexible pickup hose and valve adjustable from1to 6% concentration. KR-S2 Low Expansion Nozzle 60 gpm (227 Lpm) @ 100 psi (7 bar). Recommended for use with ANSULZ-2 eductor. PART NO. 415981KR-S4 Low Expansion Nozzle 11/2 in. NH, 60 gpm (227 Lpm) PART NO. 42006811/2 in. NH, 95 gpm (360 Lpm) PART NO. 42006911/2 in. NPSH, 60 gpm (227 Lpm) PART NO. 42146611/2 in. NPSH, 95 gpm (360 Lpm) PART NO. 421473Pickup Tube, 120...

Proportions foam concentrate and water at the desired percentage in a fire pump system. Can be used for various shipboard applications. Model Dual B-2 Pkg. 20-400 gpm (76-1515 Lpm), ATP, Class Aand B PART NO. 420011Model B-2 Pkg. 20-400 gpm (76-1515 Lpm), ATP, Class B PART NO. 420012Model W-2 Pkg. 20-400 gpm (76-1515 Lpm), ATP, Class A PART NO. 420013Model 1200 Pkg. 60-1200 gpm (227-4543 Lpm), ATP, Class B PART NO. 420014Model 1600 Pkg. 150-1600 gpm (568-6057 Lpm), ATP, Class B PART NO. 420015EductorPART NO. 420016Metering Valve, 1-LPART NO. 420017Metering Valve, 1-WPART NO. 420018Metering Valve,...

The ANSULMobile firefighting foam-attack cart is a self-contained fast-response cart ideal for small fires and chemical spills. It comes with a36-gallon foam concentrate tank, a choice of three (3) different types of nozzles at flows of 60 or 120 gpm (227 or 454 Lpm), a matching eductor,and two (2) 50 ft. lengths of 1-3/4 in. double-jacketed and lined firehose with NHTfittings. Please specify nozzle and part number when ordering. Cart with 60 gpm low expansion KR-S2 foam nozzlePART NO. 429952Cart with 60 gpm medium expansion KR-M2 foam nozzlePART NO. 429953Cart with 60 gpm Waterfog nozzlePART...