Catalog excerpts
Data Sheet Network Master™ Series Network Master Flex 10G Multirate Module 100G Multirate Module 40/100G Advanced Module
Open the catalog to page 1Network Master Flex MT1100A Overview Transport Tester for Evolving (Advancing) Networks Versatile Support up to 100 Gbps plus High Work Efficiency at R&D and Mass-Production Manufacturing Today’s core and metro communications networks are implementing 100 GigE and OTN technologies rapidly to provide sufficient bandwidth supporting the explosive increase in mobile communications data. These high-bit-rate networks demand very high reliability due to the large data volumes and variety of client signals in use. Consequently, every stage from R&D through to manufacturing, installation, and...
Open the catalog to page 2Measurement Modules Transport Tester for Evolving (Advancing) Networks 10G Multirate Module MU110010A 10 Port1, Tx/Rx RJ48 (E1 balanced) 11 Port2, Tx/Rx RJ48 (E1 balanced) 12 ort1, Tx/Rx SFP/SFP+ (OTN, Ethernet, eCPRI/RoE/CPRI/OBSAI, P Fibre Channel, SDH/SONET optical) 13 ort2, Tx/Rx SFP/SFP+ (OTN, Ethernet, eCPRI/RoE/CPRI/OBSAI, P Fibre Channel, SDH/SONET optical) 14 Port1, Tx/Rx RJ45 (Ethernet, eCPRI/RoE electrical) 15 Port2, Tx/Rx RJ45 (Ethernet, eCPRI/RoE electrical) Port1, Tx/Rx RJ45 (Ethernet, eCPRI/RoE electrical) Port2, Tx/Rx RJ45 (Ethernet, eCPRI/RoE electrical) Tx Reference Clock...
Open the catalog to page 3Mainframe/Power Modules Specifications Network Master Flex MT1100A Mainframe User Interfaces Display 12.1-inch active matrix TFT display (800 × 600 pixels) and touch screen Supported Languages English, Chinese, Japanese, French, Russian, Spanish, Finnish, Korean, German Service Interfaces USB Interface MT1100A operates as host: USB 2.0 type A (2 ports) MT1100A operates as device: USB 2.0 type Mini-B (1 port) Ethernet Interface WLAN Interface* Bluetooth Interface* *: Available for certified countries and regions including USA, Canada, Japan and EU countries. Please visit the Anritsu web site...
Open the catalog to page 4Measurement Modules Specifications 10G Multirate Module MU110010A Test Port/Reference Standard Dimensions and Mass Environmental SFP/SFP+: 2 ports • SFF-8431, SFF-8472 compliant, IEEE 802.3ae-2002, IEEE 802.3-2008 compliant RJ45: 2 ports • IEEE 802.3-2008 10BASE-T, 100BASE-TX, 1000BASE-T compliant • Auto MDI-X • 10 Mbps/100 Mbps full/half duplex, 1000 Mbps full duplex BNC: 2 ports • ITU-T G.703 compliant RJ48: 2 ports • ITU-T G.703 compliant RTT Bantam: 2 ports • ANSI DS1.102 compliant Bit Rate 12.5 Mbps 125 Mbps 1.25 Gbps 125 Mbps 1.25 Gbps 10.3125 Gbps 155.52 Mbps 622.08 Mbps 2.48832 Gbps...
Open the catalog to page 5Measurement Modules Specifications 100G Multirate Module MU110011A Test Port/Reference Standard Dimensions and Mass Environmental CE CFP: 1 port • CFP MSA Hardware Specification, Rev. 1.4 compliant • CFP MSA Management Interface Specification V2.2 R06a compliant (Not supported to MSA 100GLH) • IEEE 802.3ba-2010 compliant QSFP+: 2 ports • SFF-8436, SFF-8472 compliant • IEEE 802.3ba-2010 compliant SFP/SFP+: 2 ports • SFF-8431, SFF-8472 compliant • IEEE 802.3ae-2002, IEEE 802.3-2008 compliant RJ45: 2 ports • IEEE 802.3-2008 10BASE-T, 100BASE-TX, 1000BASE-T compliant • Auto MDI-X • 10 Mbps/100...
Open the catalog to page 6Measurement Modules Specifications 40/100G Advanced Module MU110013A Test Port/Reference Standard Sync Clock Output Dimensions and Mass Environmental CFP2: 2 ports • CFP MSA CFP2 Hardware Specification, Rev. 1.0 compliant • CFP MSA Management Interface Specification V2.2 R06a compliant (Not supported to MSA 100GLH) • IEEE 802.3ba-2010 compliant CXP: 2 ports • InfiniBand Architecture 1.2.1 Annex A6: CXP compliant • SFF-8642, IEEE 802.3ba-2010 compliant QSFP+: 2 ports • SFF-8436, SFF-8472 compliant • IEEE 802.3ba-2010 compliant Bit Rate 10.3125 Gbps × 4 Lane 10.3125 Gbps × 10 Lane 25.78125...
Open the catalog to page 7Ethernet Testing Specifications Ethernet Testing Ethernet Test Test Configuration • onitor/Generate, Pass-through, Reflector M Auto MDI-X • therType II (DIX v.2), IEEE 802.3 with 802.2 (LLC1), IEEE 802.3 with SNAP E Interface : CFP2 slots FEC enable : On/Off FEC Code : RS (528, 514, 7, 10) FEC status & counter Loss of FEC alignment, Corrected CW, Uncorrectable CW, Corrected Symbol each lane FEC related Error Injection Bit error per CAUI4 lane encoded RS-FEC (Injection timing is Single/Burst.) Configuration, Monitor/Generate Traffic Generation • Variable line rate traffic generation, up to...
Open the catalog to page 8Ethernet Testing Specifications Result, Monitor/Generate Status L • ink status, Interface type, Jabber detected, Frames present, MPLS/EoMPLS/VLAN, Speed, Full or half duplex, Local clock (Ethernet 1000 Mbps), LFS LF/RF (Ethernet 10 Gbps), Signal present, Bit rate of incoming Ethernet signal, Auto negotiation complete • ink partner abilities: Pause capable and Asymmetric pause request (not Ethernet 10 Gbps), Remote fault, Speed/Duplex L • ndicators for Utilization, Throughput and Errored frames I • ignal level indication for optical Ethernet interfaces S User-defined resolution for...
Open the catalog to page 9Ethernet Testing Specifications Service Activation Test (Y.1564) Service Activation Test ITU-T Y.1564 Service Activation Test • p to 8 services per port U C • olor-aware and non-color-aware in combinations (IP DSCP or VLAN PCP) • est modes: One-way (uni- or bi-directional, symmetrical or asymmetrical), Round-trip T • erification against service acceptance criteria: Information rate, Frame transfer delay, Frame delay variation, V Frame loss rate, Availability Service Configuration Test S • ubtests for: Committed information rate, Excess information rate, Traffic policing, Committed burst...
Open the catalog to page 10Ethernet Testing Specifications IP Channel Statistics Supported Bit Rate 10 Mbps, 100 Mbps, 1 Gbps, 10 Gbps Statistics for up to 230 channels, identified by user-defined combinations of: • IPv4, IPv6 or MAC address • VLAN ID or MPLS label • Protocol information • IP next header (protocol) • TCP/UDP ports Traffic capacity: • 0 Mbps, 100 Mbps, 1 Gbps, 10 Gbps, line speeds: 100% line load 1 Available Information per channel: • rame count/rate, Throughput, Byte count, MPLS frames, IP frame/packet size distribution, IP header bytes, IP fragments, F TTL threshold violations, IP packet count/rate,...
Open the catalog to page 11All Anritsu catalogs and technical brochures
-
Electronic measuring instruments
24 Pages
-
MW90010A Coherent OTDR
8 Pages
-
OTA Product Catalog
20 Pages
-
BERTWave™MP2100B
24 Pages
-
PIM Master™ MW82119B
2 Pages
-
MT8821C
20 Pages
-
PIM over CPRI Measurement
2 Pages
-
C-RAN Solutions
8 Pages
-
Site Master™ S331P
19 Pages
-
MG3710A Vector Signal Generator
36 Pages
-
Spectrum Master MS2712E/13E
32 Pages
-
MG3740A Analog Signal Generator
24 Pages
-
MD8475A Signalling Tester
28 Pages
-
Spectrum Master MS2720T
24 Pages
-
LMR Master S412E
2 Pages
-
VNA Master MS20xxB
16 Pages
-
Site Master S3xxE
20 Pages
-
VectorStar MS4640B Series VNA
32 Pages
-
PIM Master MW82119A
8 Pages
Archived catalogs
-
BTS Master MT8220T_2019
40 Pages
-
BTS Master MT8220T_2013
28 Pages
-
MD8430A Product Introduction
24 Pages
-
Signalling Tester
2 Pages
-
Optical Devices Product Guide
10 Pages
-
Analyzers catalogue
655 Pages