Catalogs >
Anritsu >
MX882020C Sequence Measurement Software

MX882020C Sequence Measurement Software
8Pages

Catalog excerpts

MX882020C Sequence Measurement Software - 1

Product Brochure For MT8820C Radio Communication Analyzer Sequence Measurement Software

MX882020C Sequence Measurement Software - 2

LTE/W-CDMA/GSM/CDMA2000/TD-SCDMA Terminal Tx and Rx Measurement Supports Chipset High-Speed Tx and Rx Measurement Function This measurement software is to test mobile terminals using sequence measurements with Non-Call Processing on MT8820C. To use this software, either of the separate option of MT8820C-021 or MT8820C-022 is required. The MT8820C with this measurement software installed functions as a signal generator and signal analyzer which support sequence measurements. However, mobile terminals must also support the Non-Call Processing operation and sequence measurement operation. The...

Open the catalog to page 2

MX882020C Sequence Measurement Software - 3

Initiate Completed Initialize Configure Chipset Freq/Level etc Initiate Completed Load list Total test time of signalling (Configuration) (UE setting change) Total test time of Non-signalling mode Total test time of Sequence Mode performed at same time.

Open the catalog to page 3

MX882020C Sequence Measurement Software - 4

Specifications ∗ Typical values are only for reference and are not guaranteed specifications. ● MX882020C Sequence Measurement Software When the MT8820C-008/009, MX882020C, MX882020C-00x are installed, RF Tx parametric tests of LTE/W-CDMA/GSM/CDMA2000/ TD-SCDMA terminals can be performed. Frequency: 00 MHz to 2.7 GHz 4 3.4 GHz to 3.8 GHz (with MT8820C-018) Input level: –70 to +35 dBm (Main1) Measurement accuracy: 00 MHz to 2.7 GHz, After calibration, 10° to 40°C 4 ±0.5 dB, ±0.3 dB (typ.)(–20 to +35 dBm ), ±0.7 dB (–50 to –20 dBm), ±0.9 dB (–60 to –50 dBm) For measurement bandwidth of ≤5 MHz...

Open the catalog to page 4

MX882020C Sequence Measurement Software - 5

● MX882020C-002 GSM Measurement Software Function Modulation Analysis Output Spectrum Measurement RF Tx parametric tests of GSM terminals can be performed. Frequency: 400 MHz to 2.7 GHz Input level (average power in bursts, Main1): –30 to +35 dBm (Main1) Measurement object: Normal bursts (GMSK, 8PSK) Carrier frequency accuracy: ± (Set frequency × Reference oscillator accuracy + 10 Hz) Residual phase error: ≤0.5°rms, ≤2°peak (GMSK) Residual EVM (8PSK): ≤1.5%rms Frequency: 400 MHz to 2.7 GHz Input level (average power in bursts, Main1): –30 to +35 dBm (Main1) Measurement object: Normal bursts...

Open the catalog to page 5

MX882020C Sequence Measurement Software - 6

● MX882020C-004 LTE Measurement Software Function Modulation Analysis RF Tx parametric tests of LTE terminals can be performed. Frequency: 00 MHz to 2.7 GHz 4 3.4 GHz to 3.8 GHz (with MT8820C-018) Input level: –40 to +35 dBm (Main1) Measurement object: PUSCH Carrier frequency accuracy: ± (Set frequency × Reference oscillator accuracy + 15 Hz) Modulation accuracy (residual vector error): 2.5% (400 MHz to 2.7 GHz, When measurement count is 20), (3.4 GHz to 3.8 GHz, When ≤ measurement count is 20, 18° to 28°C) ≤3.0% (3.4 GHz to 3.8 GHz, When measurement count is 20) In-Band Emission: ≤–40 dB...

Open the catalog to page 6

MX882020C Sequence Measurement Software - 7

Ordering Information Please specify the model/order number, name and quantity when ordering. The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name. Name Main frame Radio Communication Analyzer Standard accessories 1 pc Power Cord: CF Card: 1 pc PC Card Adapter (For CF card): 1 pc MT8820C Operation Manual (CD-ROM): 1 pc Options ∗1 Extended RF Hardware W-CDMA Measurement Hardware TDMA Measurement Hardware CDMA2000 Measurement Hardware 1xEV-DO Measurement Hardware∗2 TD-SCDMA Measurement Hardware LTE Measurement Hardware Audio Board...

Open the catalog to page 7

MX882020C Sequence Measurement Software - 8

Name Application parts Test USIM 001∗14 W-CDMA/GSM Test USIM W-CDMA/GSM Test USIM∗15 Anritsu Test UICC GA (Nano UICC size)∗16 Anritsu Test UICC GA (Micro UICC size)∗16 Anritsu Test UICC GT (Nano UICC size)∗16 Anritsu Test UICC GT (Micro UICC size)∗16 Handset PP2S Output Cable CDMA2000 Cable [D-Sub (15 pin, P-type) · D-Sub (15 pin, P-type), used in combination with J1267 (sold separately)] CDMA2000 Cross Cable [D-Sub (9 pin, P-type) · D-Sub (9 pin, P-type), reverse cable used in combination with J1249 (sold separately)] Coaxial Cord, 1 m (N-P · 5D-2W · N-P) Coaxial Cord, 2 m (N-P · 5D-2W ·...

Open the catalog to page 8