video corpo

MX882000C W-CDMA Measurement Software
22Pages

{{requestButtons}}

Catalog excerpts

MX882000C W-CDMA Measurement Software - 1

Product Brochure For MT8820C Radio Communication Analyzer HSDPA Measurement Software HSUPA Measurement Software HSPA Evolution Measurement Software DC-HSDPA Measurement Software DC-HSUPA Measurement Software

Open the catalog to page 1
MX882000C W-CDMA Measurement Software - 2

Advanced High-speed Measurement Method and Batch Measurement Supporting the Manufacture of W-CDMA Terminals The MX882000C W-CDMA Measurement Software is designed for measuring the transmitter and receiver of 3G W-CDMA terminals. When the MX882000C W-CDMA Measurement Software and MX882001C GSM Measurement Software are installed in the MT8820C Radio Communication Analyzer main frame, the Tx and Rx characteristics of dual-mode W-CDMA/GSM terminals, which are becoming very popular worldwide, can be evaluated using a single MT8820C unit.∗ Installing the MX88207xC W-CDMA Ciphering Software∗...

Open the catalog to page 2
MX882000C W-CDMA Measurement Software - 3

MX882000C W-CDMA Measurement Software Transmitter Measurement Occupied Bandwidth Transmit Power The occupied bandwidth of the W-CDMA terminal can be measured. The transmit power of the W-CDMA terminal can be measured when controlled to the maximum, minimum, and any other level. When two or more measurements are made, the maximum, average, and minimum results are displayed, supporting evaluation of the transmit power distribution. This functionality is also supported for other measurements. Spectrum Emission Mask This support Pass/Fail testing of W-CDMA terminal spectrum emissions by...

Open the catalog to page 3
MX882000C W-CDMA Measurement Software - 4

Adjacent Channel Leakage Power Ratio The adjacent channel leakage power ratio of the W-CDMA terminal can be measured easily, and the advanced measurement architecture supports faster power measurement at points ±5 MHz and ±10 MHz from the center frequency. Phase Error Modulation Analysis The modulation accuracy of the W-CDMA terminal can be measured. In addition to the 3GPP-compliant error vector magnitude (EVM), the phase error, amplitude error, origin offset, I/Q level ratio, and peak code domain error can also be measured. Amplitude Error The vector error magnitude, phase error, and...

Open the catalog to page 4
MX882000C W-CDMA Measurement Software - 5

Open Loop Power Control The transmit power for the RACH∗ preamble of the W-CDMA terminal is determined by the downlink RF signal power and RACH-related call processing parameters. The transmit power and template mask for the RACH preamble can be measured simultaneously in the time domain. ∗: Random Access Channel Receiver Measurement Bit Error Rate (BER) The bit error rate can be measured using the 3GPP-compliant loopback test mode. In addition, feeding the demodulated data and clock signals from the W-CDMA terminal directly to the MT8820C supports bit error rate measurement. Both PN9 and...

Open the catalog to page 5
MX882000C W-CDMA Measurement Software - 6

Downlink RF Signal Generator Functionality The relative level of each of the CPICH∗1, P-CCPCH∗2, SCH∗3, PICH∗4, DPCH∗5, S-CCPCH∗6, and AICH∗7 code channels can be set within the range of –30 to 0 dB. In addition, OCNS∗8 and AWGN∗9 can also be provided, supporting generation of any downlink modulation signal required for Tx and Rx tests. The RF output level can be set within the range of –140 to –10 dBm (MAIN I/O connectors) in 0.1 dB steps. Call Processing Connection Test Various connection tests, such as registration, origination, termination, handover, terminal disconnect and network...

Open the catalog to page 6
MX882000C W-CDMA Measurement Software - 7

Higher Productivity Reducing Test Time for W-CDMA/GSM Dual-mode Terminals Intersystem Handover Control Both the W-CDMA and GSM Tx and Rx characteristics of dual-mode W-CDMA/GSM terminals can be measured and voice handover from W-CDMA to GSM can be tested using the intersystem handover function, because the MT8820C application software switches quickly while the dual-mode terminal is handing over. MX882050C-007/008/009 W-CDMA Band XII, XIII, XIV, XIX, XX, XXI, XI, IX Supports W-CDMA Band XII, XIII, XIV, XIX, XX, XXI, XI, IX The MX882050C-007 W-CDMA Band XII, XIII, XIV, XIX, XX, XXI option...

Open the catalog to page 7
MX882000C W-CDMA Measurement Software - 8

MX882000C-001 W-CDMA Voice Codec Real-time Voice Encoding/Decoding and Audio Measurement Functions The MX882000C-001 W-CDMA Voice Codec supports real-time voice encoding and decoding in software, so end-to-end communication with terminals can be tested by installing this option and the MT8820C-011 Audio Board option. In addition, the audio transmitter and receiver can be tested while calling. Audio Transmitter Measurement The tone signal from the MT8820C AF Output connector is supplied to the microphone of the W-CDMA terminal and the audio transmitter characteristics of the W-CDMA terminal...

Open the catalog to page 8
MX882000C W-CDMA Measurement Software - 9

MX882050C-002, MX882051C-002 W-CDMA External Packet Data Packet Communication Data Transfer Test The MX88205xC-002 W-CDMA External Packet Data option supports data transfer to/from external equipment via the Ethernet port. End-to-end Ping interconnect test between an application server connected to the MT8820C and the W-CDMA terminal or client PC connected to the W-CDMA terminal can be tested using the MX882050C-002 and MX882051C-002. External IP Packet Test The MT8820C sends IP packets from the W-CDMA terminal to the application server. It also sends IP packets from the application server...

Open the catalog to page 9
MX882000C W-CDMA Measurement Software - 10

MX882050C-003 MX882051C-003 W-CDMA Video Phone Test End-to-End Video Phone Test End-to-end video communication via the Ethernet port in the rear panel of the MT8820C can be tested using the MX882050C-003 and MX882051C-003 W-CDMA Video Phone Test. End-to-end video communication with a single MT8820C can be tested by installing this software option and the Parallel Phone Measurement Hardware. MX882000C-011 HSDPA Measurement Software Utilizing an Advanced High-speed Measuring Method and Offering Batch Measurements to Support HSDPA Terminal Production The MX882000C-011 HSDPA Measurement...

Open the catalog to page 10
MX882000C W-CDMA Measurement Software - 11

Transmitter Measurement Receiver Measurement HS-DPCCH Power Control, Modulation Analysis, Code Domain Power HSDPA Throughput At measurement in the time domain, the power step at the HS-DPCCH slot boundary, modulation, and code domain power are measured. The HSDPA throughput can be measured by counting the number of ACK blocks from the HSDPA terminal. HS-DPCCH Power Control Transmit Power, Spectrum Emission Mask, Adjacent Channel Leakage Power Ratio The transmit power, spectrum emission mask and adjacent channel leakage power ratio of the HS-DPCCH transmission slot are measured. CQI...

Open the catalog to page 11

All Anritsu catalogs and technical brochures

  1. MT8821C

    20 Pages

Archived catalogs