MD1260A 40/100G Ethernet Analyzer Brochure
20Pages

Product Brochure

All-in-One Compact 40G/100G Ethernet Analyzer Compact Analyzer for Manufacturing and Installing 40 GbE/100 GbE Equipment and Networks The all-in-one portable MD1260A 40/100G Ethernet Analyzer supports the latest high-speed transmission technologies, such as 40 GbE/100 GbE, OTU3, and OTU4. It has all the functions needed for manufacturing and installing equipment and networks. Moreover, it can be used for R&D final evaluation of 40G/100G equipment and devices. It is a measuring instrument for assuring the quality of high-speed networks forming the foundation of nextgeneration applications...

Manufacturing Inspection of 40G/100G Transmission Equipment The all-in-one MD1260A has every test function for manufacturing inspection of transmission equipment. Ethernet/IP Tests OTU3/OTU4 Signal General testing using OTU3 and OTU4 signals is supported along with basic OTN measurements, such as errors/alarms, BER, APS measurements and Delay measurements. LLD monitoring for all lanes or per lane as well as an OH edit/monitor function and OTU4 mapping analysis function are supported too. 40 GbE/100 GbE Frame Error/Alarm Insertion General Ethernet/IP frame tests are supported. Basic Ethernet...

Error/Alarm Insertion and Monitor OH Edit/Monitor Operation Recording Function Eile EcftC Farnst View blefe :ROUTG:HOOE HORKAL : SOURCE: sTKeam: TV F-E SEQUE HT IAL : SOURCE: STRE an: Dl>R a 11 on: R C Pea t;COUNl 1 : SOURCE: TFAT if:rr:TYHK PEEIMI [SOURCE:TPATtErn:WORD fHltll ; SOURCE :STReu:FSIZE:TVPE FIXED :SOURCE:STR£aB:£OHTrol:TVPE FIXED :SOURCE:STRE am:CO WT rnl:VALLIE 1^00000 : SOURCE : STmai: COLJPH 1 : SOURCE: STft E am: 8UR St: E HABl e 0 SOURCE :STR£ an: BUR SI : SIZE 1 r. SOURce: ^Tfre am: HEAt>Er:vAn1 a bleZi TYPE OFF : SOURCE: STRE am: T-F R inf: E HABl t 0 zSOURCE : STRsan:H...

Panel Layout Frame Ground For connecting anti-static wristband Display 12.1-inch touch panel Disk Access, Stand-by, Power Lamps Power Switch USB Port Tx Ref Clock Input Terminal Input for reference clock to synchronize Tx clock Left side PS2 Port for Mouse Serial Interface (not used) Ethernet Port Port 1: For external PC, Port 2: For multi-unit control Line Input (not used) Line Output (not used) Microphone Input (not used) USB Port CFP Slot For CFP module and 10 Lane Extender Monitor Output (15 pins) Monitor Output (9 pins)/Serial Interface Keyboard PS2 Port Tx Ref Clock Output Terminal...

Input Device Touch panel, Power switch Peripheral Connection 12.1-inch WXGA (1280 × 768 or 1280 × 800) Ethernet, GPIB (Opt-030) ∗: Includes operation record function VGA output (SVGA), USB (5 Ports, Revision 2.0), Ethernet (2 Ports, 10/100/1000 BASE-T) Windows Embedded Standard 2009 Internal Memory RAM: 1 GB, Flash disk drive: 8 GB (includes OS) For Multi-unit connection (Opt-001, 003) Level: TTL Connector: BNC (75Ω) ∗: Verified up to three units 1 CFP MSA Hardware Specification, Draft 1.0 CFP MSA Management Interface Specification 1.4 100 GbE: 10.312500000 Gbit/s × 10 40 GbE: 10.312500000...

Frequency Measurement Clock Source Clock Monitor Transceiver Setting CFP Monitor PCS Lane Monitor 100 GbE: 103,125,000,000 Hz ± 200 ppm No Frame 20 Lane: 103,125,000,000 Hz ± 200 ppm No Frame 10 Lane: 10,312,500,000 Hz ± 200 ppm × 10 lanes 100 GbE: Internal, External 10 MHz Input, Tx reference input, Sync. input, Received∗1 No Frame 20 Lane: Internal, External 10 MHz Input, Tx reference input No Frame 10 Lane: Internal, External 10 MHz Input, Tx reference input 100 GbE: CDR Unlock, Clock Source Loss No Frame 20 Lane: CDR Unlock, Clock Source Loss No Frame 10 Lane: CDR Unlock × 10 Lanes,...

Counter Measurement Frame Size Distribution (Tx/Rx) Gap Size Distribution (Tx/Rx) Current: Tx Rate (bit/s), Tx Rate (%) Accumulated: Tx Good Bytes, Tx Errored Bytes, Transmit Duration (ns) Current (fps)/Accumulated: x Good Frames, Tx Oversize, Tx Oversize & FCS Error, Tx Undersize, Tx Fragments, T Tx FCS Errors, Tx Broadcast Frames, Tx Multicast Frames, Tx MPLS-TP, Tx PBB, Tx ARP Request, Tx ARP Reply, Tx PINGv4 Request, Tx PINGv4 Reply, Tx NDP (NS), Tx NDP (NA), Tx PINGv6 Request, Tx PINGv6 Reply Current/Accumulated: LF, RF Current: Rx Rate (bit/s), Rx Rate (%), Current Latency (ns)...

Frequency Measurement Clock Source Clock Monitor Transceiver Setting CFP Monitor PCS Lane Monitor 40 GbE: 41,250,000,000 Hz ±200 ppm No Frame: 10,312,500,000 ±200 ppm × 4 lanes 40 GbE: Internal, External 10 MHz Input, Tx reference input, Sync. input, Received∗1 No Frame: Internal, External 10 MHz Input, Tx reference input 40 GbE: CDR Unlock, Clock Source Loss No Frame: CDR Unlock × 4 Lanes, Clock Source Loss Tx: VOD, Pre-Emphasis (First post tap, Pre tap, Second post tap) Rx: Equalizer (DC gain, Control) LOS, Programmable Alarm1, Programmable Alarm2, Programmable Alarm3, Global Alarm,...

Counter Measurement Frame Size Distribution (Tx/Rx) Gap Size Distribution (Tx/Rx) Current: Tx Rate (bit/s), Tx Rate (%) Accumulated: Tx Good Bytes, Tx Errored Bytes, Transmit Duration (ns) Current (fps)/Accumulated: x Good Frames, Tx Oversize, Tx Oversize & FCS Error, Tx Undersize, Tx Fragments, T Tx FCS Errors, Tx Broadcast Frames, Tx Multicast Frames, Tx MPLS-TP, Tx PBB, Tx ARP Request, Tx ARP Reply, Tx PINGv4 Request, Tx PINGv4 Reply, Tx NDP (NS), Tx NDP (NA), Tx PINGv6 Request, Tx PINGv6 Reply Current/Accumulated: LF, RF Current: Rx Rate (bit/s), Rx Rate (%), Current Latency (ns)...

Frequency Measurement Clock Source Clock Monitor Transceiver Setting Error/Alarm Insertion Error/Alarm Measurement CFP Monitor Mapping Test Pattern OH Preset OH Monitor Alarm Insertion Error Insertion LLD Monitor LLD Status LLD Skew Generation LLD Lane Mapping OH Capture Frame Capture OTN Delay Measurement Test Pattern Error Insertion Counter Port Setting Add-on Function OTU4: 111,809,973,568 Hz ± 200 ppm No Frame 20 Lane: 111,809,973,568 Hz ± 200 ppm No Frame 10 Lane: 11,180,997,357 Hz ± 200 ppm × 10 lanes OTU4: Internal, External 10 MHz Input, Tx reference input, Received∗ No Frame:...