
OPERATION AND MAINTENANCE MANUAL MY-CURRENT 1.2 MY-CURRENT 2 MY-CURRENT 2.5 MY-CURRENT 3F MY-CURRENT 5 MY-CURRENT 7 Automatic Non-Carbon-Brush Series SAING EI CORP. https://www.mytorqtools.com Y2F231A-10E-002
Open the catalog to page 1NOTICE Metal Assembly sensor screwdriver is designed for installing threaded fasteners in light industrial and appliance manufacturing applications. SAING EI is not responsible for customer modification of tools for applications on which SAING EI was not consulted. WARNING Important safety information enclosed. Read all these instructions before placing tool in service or operation this tool and save these instructions. It is the responsibility of the employer to place the information in this manual into the hands of the operator. Failure to observe the following warnings could result in injury....
Open the catalog to page 2SAVE THIS INSTRUCTIONS a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust of fumes. c) Keep children, and bystanders away while operating a power tool. Distractions can cause you to lose control. a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric...
Open the catalog to page 3d) Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Do not let visitors touch the tool or extension cord. All visitors should be kept away from work area. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are cause by poorly maintained power tools. Inspect...
Open the catalog to page 4Grounding Instructions 1、This tool should be grounded while in use to protect the operator from electric shock. NOTICE! To ensure the grounding result, the grounding conductor of the power cord must be well connected with the grounding terminal of power facility. This tool is equipped with grounding conductors. The Green (or Green and Yellow) conductor in the Power Cord is the grounding wire. Never connect Green (or Green and Yellow) to a live terminal. The grounding wires in this tool can not only earth the electric leakage safely, but also can eliminate ESD-the electrostatic that tool occurred...
Open the catalog to page 51) Do not allow chemicals such as acetone, benzene, thinner, trichloroethylene ketone, or other similar chemicals to come in contact with the current control screwdriver housing as damage will result. 2) Use the current control screwdriver carefully, do not drop or be impacted, it is best to use a balancer to lift it, and set it on the auxiliary arm for operation. 3) Loading and unloading the current control screwdriver head: Simply pull down the screwdriver head cap with your fingertips to freely attach or detach the sensor screwdriver head, release the finger to return the screwdriver head...
Open the catalog to page 61. The screwdriver must be operated in top condition, one day working hour must be not more than eight hours. Cording to operating frequency and torque loaded, we suggest adding lubricating oils in clutch per 3-6 months, and kindly contact with distributor when product's maintenance. 2. Please note don’t let the motor get over heated, please refer to the Working Time from the Technical Specification sheet. 3. The frequency use of this electric current control screwdriver is over than eight hours a day, still it needs periodically testing and treatment. 4. Inspect tool cords periodically and if...
Open the catalog to page 7Power Consumption Repeatable Torque Accuracy Unloaded Rotation Speed ±3% (r/min) Can be set and adjusted Working Time Power controller Model of Suspension Rack Accessories BIT Type: No. 00 ... Bit use in dia 1.3~1.8mm screw No. 0... .Bit use in dia 1.8~2.0mm screw No. 1... .Bit use in dia 2.0~2.6mm screw No. 2.. ..Bit use in dia 3.0~4.0mm screw. MY-CURRENT 1.2 MY-CURRENT 2 MY-CURRENT 2.5 MY-CURRENT 3F MY-CURRENT 5 MY-CURRENT 7 with BIT with BIT with BIT with BIT with BIT with BIT Our company reserves the right to mo
Open the catalog to page 816 Pages
10 Pages
10 Pages
14 Pages
7 Pages
10 Pages
8 Pages
8 Pages
18 Pages
11 Pages
10 Pages
21 Pages
49 Pages
29 Pages
8 Pages
2 Pages
18 Pages
35 Pages
32 Pages