
OPERATION AND MAINTENANCE MANUAL ANLIDAR INDUSTRIAL CO., LTD. http://www.anlidar.com Y2F040-3E-001
Open the catalog to page 1WARNING Important safety information enclosed. Read all these instructions before placing tool in service or operation this tool and save these instructions. It is the responsibility of the employer to place the information in this manual into the hands of the operator. Failure to observe the following warnings could result in injury. When using electric tools, Basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following: 1. Important Safety Instructions 2. Operations Cautions 3. Grounding Instructions 4. Installation...
Open the catalog to page 3WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious injure. The term “power tool” in all of the warning listed below refer to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust of fumes. c) Keep children, and bystanders...
Open the catalog to page 4f) Keep cutting tools sharp and clean, properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tools, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. a) Have your power tool serviced by qualified repair person using only identical replacement parts, this will ensure...
Open the catalog to page 51. Please read the operating manual thoroughly and comply with safety regulation to operate this Multi-Function Controller. 2. Please grasp the plug of power cord while plugging in or out the plugs of connecting cord of Electric Screwdriver and power cord. 3. Please fix the power controller to avoid any danger of pulling and dragging the power cord. 4. Do not near oil, chemical materials or heated objects, also please be alert not to scratch the power cord by sharp object. 5. This type of Controller can only be applied to Anlidar Electric Screwdriver with Counter. Do not use Electric Screwdriver...
Open the catalog to page 6Grounding Instructions The tool should be grounded while in use to protect the operator from electric shock. The tool is equipped with a three-conductor cord and three-prong grounding-type plug to fit the proper grounding-type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. Green and yellow----- Earth Blue ------ Neutral Brown ------ Live Use the controller voltage recommended in the specification of this manul. When using a commercial power supply be sure to set up circuit and safety...
Open the catalog to page 71. The controller must be operated in top condition, one day working hour must be not more than eight hours. 2. Please note don’t let the controller get over heated, every minute use 10—15 screws to operate. 3. The frequency use of this electric screw driver is over eight hours a day, still it needs periodically testing and treatment. Every 5-6 months.
Open the catalog to page 81. The use of other than genuine MYTORQ replacement parts may Result in decreased tool performance and increased maintenance, and may invalidate all warranties. 2. All repairs and maintenance of this tool and its word must be performed by an authorized service center. 3. Anlidar is not responsible for customer modification of tools for applications on which Anlidar was not consulted. 4. Repairs should be made only by authorized, trained personnel. Consult your nearest MYTORQ authorized service center. 5. It is the responsibility of the employer to place the information in this manual into the...
Open the catalog to page 916 Pages
10 Pages
10 Pages
14 Pages
7 Pages
8 Pages
8 Pages
18 Pages
11 Pages
10 Pages
21 Pages
49 Pages
29 Pages
8 Pages
2 Pages
18 Pages
35 Pages
32 Pages